Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932524AbbLBLZ1 (ORCPT ); Wed, 2 Dec 2015 06:25:27 -0500 Received: from mail-pa0-f51.google.com ([209.85.220.51]:36291 "EHLO mail-pa0-f51.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932154AbbLBLZY (ORCPT ); Wed, 2 Dec 2015 06:25:24 -0500 From: Taeung Song To: Arnaldo Carvalho de Melo Cc: linux-kernel@vger.kernel.org, Ingo Molnar , Taeung Song , Namhyung Kim , Jiri Olsa Subject: [PATCH v12 04/22] perf config: Document variables for 'annotate' section in man page Date: Wed, 2 Dec 2015 19:54:22 +0900 Message-Id: <1449053680-31931-4-git-send-email-treeze.taeung@gmail.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1449053680-31931-1-git-send-email-treeze.taeung@gmail.com> References: <1449053680-31931-1-git-send-email-treeze.taeung@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4692 Lines: 141 Explain 'annotate' section and its variables. 'hide_src_code', 'use_offset', 'jump_arrows', 'show_linenr', 'show_nr_jump' and 'show_total_period'. Cc: Namhyung Kim Cc: Jiri Olsa Signed-off-by: Taeung Song --- tools/perf/Documentation/perf-config.txt | 110 +++++++++++++++++++++++++++++++ 1 file changed, 110 insertions(+) diff --git a/tools/perf/Documentation/perf-config.txt b/tools/perf/Documentation/perf-config.txt index e4817e0..077610d 100644 --- a/tools/perf/Documentation/perf-config.txt +++ b/tools/perf/Documentation/perf-config.txt @@ -168,6 +168,116 @@ buildid.*:: cache location, or to disable it altogether. If you want to disable it, set buildid.dir to /dev/null. The default is $HOME/.debug +annotate.*:: + These options work only for TUI. + These are in control of addresses, jump function, source code + in lines of assembly code from a specific program. + + annotate.hide_src_code:: + If a program which is analyzed has source code, + this option lets 'annotate' print a list of assembly code with the source code. + For example, let's see a part of a program. There're four lines. + If this option is 'true', they can be printed + without source code from a program as below. + + │ push %rbp + │ mov %rsp,%rbp + │ sub $0x10,%rsp + │ mov (%rdi),%rdx + + But if this option is 'false', source code of the part + can be also printed as below. Default is 'false'. + + │ struct rb_node *rb_next(const struct rb_node *node) + │ { + │ push %rbp + │ mov %rsp,%rbp + │ sub $0x10,%rsp + │ struct rb_node *parent; + │ + │ if (RB_EMPTY_NODE(node)) + │ mov (%rdi),%rdx + │ return n; + + annotate.use_offset:: + Basing on a first address of a loaded function, offset can be used. + Instead of using original addresses of assembly code, + addresses subtracted from a base address can be printed. + Let's illustrate an example. + If a base address is 0XFFFFFFFF81624d50 as below, + + ffffffff81624d50 + + an address on assembly code has a specific absolute address as below + + ffffffff816250b8:│ mov 0x8(%r14),%rdi + + but if use_offset is 'true', an address subtracted from a base address is printed. + Default is true. This option is only applied to TUI. + + 368:│ mov 0x8(%r14),%rdi + + annotate.jump_arrows:: + There can be jump instruction among assembly code. + Depending on a boolean value of jump_arrows, + arrows can be printed or not which represent + where do the instruction jump into as below. + + │ ┌──jmp 1333 + │ │ xchg %ax,%ax + │1330:│ mov %r15,%r10 + │1333:└─→cmp %r15,%r14 + + If jump_arrow is 'false', the arrows isn't printed as below. + Default is 'false'. + + │ ↓ jmp 1333 + │ xchg %ax,%ax + │1330: mov %r15,%r10 + │1333: cmp %r15,%r14 + + annotate.show_linenr:: + When showing source code if this option is 'true', + line numbers are printed as below. + + │1628 if (type & PERF_SAMPLE_IDENTIFIER) { + │ ↓ jne 508 + │1628 data->id = *array; + │1629 array++; + │1630 } + + However if this option is 'false', they aren't printed as below. + Default is 'false'. + + │ if (type & PERF_SAMPLE_IDENTIFIER) { + │ ↓ jne 508 + │ data->id = *array; + │ array++; + │ } + + annotate.show_nr_jumps:: + Let's see a part of assembly code. + + │1382: movb $0x1,-0x270(%rbp) + + If use this, the number of branches jumping to that address can be printed as below. + Default is 'false'. + + │1 1382: movb $0x1,-0x270(%rbp) + + annotate.show_total_period:: + To compare two records on an instruction base, with this option + provided, display total number of samples that belong to a line + in assembly code. If this option is 'true', total periods are printed + instead of percent values as below. + + 302 │ mov %eax,%eax + + But if this option is 'false', percent values for overhead are printed i.e. + Default is 'false'. + + 99.93 │ mov %eax,%eax + SEE ALSO -------- linkperf:perf[1] -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/