Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751893AbbLBTmz (ORCPT ); Wed, 2 Dec 2015 14:42:55 -0500 Received: from mail-pf0-f171.google.com ([209.85.192.171]:34486 "EHLO mail-pf0-f171.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751078AbbLBTmy (ORCPT ); Wed, 2 Dec 2015 14:42:54 -0500 X-Greylist: delayed 387 seconds by postgrey-1.27 at vger.kernel.org; Wed, 02 Dec 2015 14:42:54 EST From: Jin Qian To: Greg Kroah-Hartman , Greg Hackmann , Joe Perches , Christoffer Dall , Peter Senna Tschudin , Jason Hu , =?UTF-8?q?Alex=20Benn=C3=A9e?= , Yu Ning , linux-kernel@vger.kernel.org Cc: Jin Qian Subject: [PATCH v3 2/8] android_pipe: don't be clever with #define offsets Date: Wed, 2 Dec 2015 11:35:57 -0800 Message-Id: <1449084968-30211-2-git-send-email-jinqian@android.com> X-Mailer: git-send-email 2.6.0.rc2.230.g3dd15c0 In-Reply-To: <1449084968-30211-1-git-send-email-jinqian@android.com> References: <1449084968-30211-1-git-send-email-jinqian@android.com> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3150 Lines: 73 From: Alex Bennée You just make it harder to figure out when commands are being used. Signed-off-by: Alex Bennée Signed-off-by: Jin Qian --- drivers/platform/goldfish/goldfish_pipe.c | 16 +++++----------- 1 file changed, 5 insertions(+), 11 deletions(-) diff --git a/drivers/platform/goldfish/goldfish_pipe.c b/drivers/platform/goldfish/goldfish_pipe.c index e7a29e2..0fb3a34 100644 --- a/drivers/platform/goldfish/goldfish_pipe.c +++ b/drivers/platform/goldfish/goldfish_pipe.c @@ -90,12 +90,6 @@ #define CMD_WRITE_BUFFER 4 /* send a user buffer to the emulator */ #define CMD_WAKE_ON_WRITE 5 /* tell the emulator to wake us when writing is possible */ - -/* The following commands are related to read operations, they must be - * listed in the same order than the corresponding write ones, since we - * will use (CMD_READ_BUFFER - CMD_WRITE_BUFFER) as a special offset - * in goldfish_pipe_read_write() below. - */ #define CMD_READ_BUFFER 6 /* receive a user buffer from the emulator */ #define CMD_WAKE_ON_READ 7 /* tell the emulator to wake us when reading * is possible */ @@ -272,8 +266,6 @@ static ssize_t goldfish_pipe_read_write(struct file *filp, char __user *buffer, unsigned long irq_flags; struct goldfish_pipe *pipe = filp->private_data; struct goldfish_pipe_dev *dev = pipe->dev; - const int cmd_offset = is_write ? 0 - : (CMD_READ_BUFFER - CMD_WRITE_BUFFER); unsigned long address, address_end; int ret = 0; @@ -325,7 +317,8 @@ static ssize_t goldfish_pipe_read_write(struct file *filp, char __user *buffer, /* Now, try to transfer the bytes in the current page */ spin_lock_irqsave(&dev->lock, irq_flags); - if (access_with_param(dev, CMD_WRITE_BUFFER + cmd_offset, + if (access_with_param(dev, + is_write ? CMD_WRITE_BUFFER : CMD_READ_BUFFER, address, avail, pipe, &status)) { gf_write_ptr(pipe, dev->base + PIPE_REG_CHANNEL, dev->base + PIPE_REG_CHANNEL_HIGH); @@ -333,7 +326,7 @@ static ssize_t goldfish_pipe_read_write(struct file *filp, char __user *buffer, gf_write_ptr((void *)address, dev->base + PIPE_REG_ADDRESS, dev->base + PIPE_REG_ADDRESS_HIGH); - writel(CMD_WRITE_BUFFER + cmd_offset, + writel(is_write ? CMD_WRITE_BUFFER : CMD_READ_BUFFER, dev->base + PIPE_REG_COMMAND); status = readl(dev->base + PIPE_REG_STATUS); } @@ -370,7 +363,8 @@ static ssize_t goldfish_pipe_read_write(struct file *filp, char __user *buffer, set_bit(wakeBit, &pipe->flags); /* Tell the emulator we're going to wait for a wake event */ - goldfish_cmd(pipe, CMD_WAKE_ON_WRITE + cmd_offset); + goldfish_cmd(pipe, + is_write ? CMD_WAKE_ON_WRITE : CMD_WAKE_ON_READ); /* Unlock the pipe, then wait for the wake signal */ mutex_unlock(&pipe->lock); -- 2.6.0.rc2.230.g3dd15c0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/