Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1759579AbbLCKaX (ORCPT ); Thu, 3 Dec 2015 05:30:23 -0500 Received: from eusmtp01.atmel.com ([212.144.249.242]:30446 "EHLO eusmtp01.atmel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1759432AbbLCKaS (ORCPT ); Thu, 3 Dec 2015 05:30:18 -0500 Subject: Re: [PATCH v2 1/4] i2c: at91: add support for the HOLD field To: Ludovic Desroches , , References: <1449136434-27619-1-git-send-email-ludovic.desroches@atmel.com> <1449136434-27619-2-git-send-email-ludovic.desroches@atmel.com> CC: , , , , From: Nicolas Ferre Organization: atmel Message-ID: <566019CC.3060005@atmel.com> Date: Thu, 3 Dec 2015 11:30:36 +0100 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101 Thunderbird/38.4.0 MIME-Version: 1.0 In-Reply-To: <1449136434-27619-2-git-send-email-ludovic.desroches@atmel.com> Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: 8bit X-Originating-IP: [10.161.30.18] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5403 Lines: 168 Le 03/12/2015 10:53, Ludovic Desroches a ?crit : > The hold field allows to configure the data hold time which can be set > with the help of the generic binding 'i2c-sda-hold-time-ns'. This > feature has been introduced with SAMA5D4 SoC family. > > Signed-off-by: Ludovic Desroches Acked-by: Nicolas Ferre > --- > drivers/i2c/busses/i2c-at91.c | 53 ++++++++++++++++++++++++++++++++++++++++--- > 1 file changed, 50 insertions(+), 3 deletions(-) > > diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c > index 10835d1..921d32b 100644 > --- a/drivers/i2c/busses/i2c-at91.c > +++ b/drivers/i2c/busses/i2c-at91.c > @@ -64,6 +64,8 @@ > #define AT91_TWI_IADR 0x000c /* Internal Address Register */ > > #define AT91_TWI_CWGR 0x0010 /* Clock Waveform Generator Reg */ > +#define AT91_TWI_CWGR_HOLD_MAX 0x1f > +#define AT91_TWI_CWGR_HOLD(x) (((x) & AT91_TWI_CWGR_HOLD_MAX) << 24) > > #define AT91_TWI_SR 0x0020 /* Status Register */ > #define AT91_TWI_TXCOMP BIT(0) /* Transmission Complete */ > @@ -110,6 +112,7 @@ struct at91_twi_pdata { > unsigned clk_offset; > bool has_unre_flag; > bool has_alt_cmd; > + bool has_hold_field; > struct at_dma_slave dma_slave; > }; > > @@ -187,10 +190,11 @@ static void at91_init_twi_bus(struct at91_twi_dev *dev) > */ > static void at91_calc_twi_clock(struct at91_twi_dev *dev, int twi_clk) > { > - int ckdiv, cdiv, div; > + int ckdiv, cdiv, div, hold = 0; > struct at91_twi_pdata *pdata = dev->pdata; > int offset = pdata->clk_offset; > int max_ckdiv = pdata->clk_max_div; > + u32 twd_hold_time_ns = 0; > > div = max(0, (int)DIV_ROUND_UP(clk_get_rate(dev->clk), > 2 * twi_clk) - offset); > @@ -204,8 +208,33 @@ static void at91_calc_twi_clock(struct at91_twi_dev *dev, int twi_clk) > cdiv = 255; > } > > - dev->twi_cwgr_reg = (ckdiv << 16) | (cdiv << 8) | cdiv; > - dev_dbg(dev->dev, "cdiv %d ckdiv %d\n", cdiv, ckdiv); > + if (pdata->has_hold_field) { > + of_property_read_u32(dev->dev->of_node, "i2c-sda-hold-time-ns", > + &twd_hold_time_ns); > + > + /* > + * hold time = HOLD + 3 x T_peripheral_clock > + * Use clk rate in kHz to prevent overflows when computing > + * hold. > + */ > + hold = DIV_ROUND_UP(twd_hold_time_ns > + * (clk_get_rate(dev->clk) / 1000), 1000000); > + hold -= 3; > + if (hold < 0) > + hold = 0; > + if (hold > AT91_TWI_CWGR_HOLD_MAX) { > + dev_warn(dev->dev, > + "HOLD field set to its maximum value (%d instead of %d)\n", > + AT91_TWI_CWGR_HOLD_MAX, hold); > + hold = AT91_TWI_CWGR_HOLD_MAX; > + } > + } > + > + dev->twi_cwgr_reg = (ckdiv << 16) | (cdiv << 8) | cdiv > + | AT91_TWI_CWGR_HOLD(hold); > + > + dev_dbg(dev->dev, "cdiv %d ckdiv %d hold %d (%d ns)\n", > + cdiv, ckdiv, hold, twd_hold_time_ns); > } > > static void at91_twi_dma_cleanup(struct at91_twi_dev *dev) > @@ -797,6 +826,7 @@ static struct at91_twi_pdata at91rm9200_config = { > .clk_offset = 3, > .has_unre_flag = true, > .has_alt_cmd = false, > + .has_hold_field = false, > }; > > static struct at91_twi_pdata at91sam9261_config = { > @@ -804,6 +834,7 @@ static struct at91_twi_pdata at91sam9261_config = { > .clk_offset = 4, > .has_unre_flag = false, > .has_alt_cmd = false, > + .has_hold_field = false, > }; > > static struct at91_twi_pdata at91sam9260_config = { > @@ -811,6 +842,7 @@ static struct at91_twi_pdata at91sam9260_config = { > .clk_offset = 4, > .has_unre_flag = false, > .has_alt_cmd = false, > + .has_hold_field = false, > }; > > static struct at91_twi_pdata at91sam9g20_config = { > @@ -818,6 +850,7 @@ static struct at91_twi_pdata at91sam9g20_config = { > .clk_offset = 4, > .has_unre_flag = false, > .has_alt_cmd = false, > + .has_hold_field = false, > }; > > static struct at91_twi_pdata at91sam9g10_config = { > @@ -825,6 +858,7 @@ static struct at91_twi_pdata at91sam9g10_config = { > .clk_offset = 4, > .has_unre_flag = false, > .has_alt_cmd = false, > + .has_hold_field = false, > }; > > static const struct platform_device_id at91_twi_devtypes[] = { > @@ -854,6 +888,15 @@ static struct at91_twi_pdata at91sam9x5_config = { > .clk_offset = 4, > .has_unre_flag = false, > .has_alt_cmd = false, > + .has_hold_field = false, > +}; > + > +static struct at91_twi_pdata sama5d4_config = { > + .clk_max_div = 7, > + .clk_offset = 4, > + .has_unre_flag = false, > + .has_alt_cmd = false, > + .has_hold_field = true, > }; > > static struct at91_twi_pdata sama5d2_config = { > @@ -861,6 +904,7 @@ static struct at91_twi_pdata sama5d2_config = { > .clk_offset = 4, > .has_unre_flag = true, > .has_alt_cmd = true, > + .has_hold_field = true, > }; > > static const struct of_device_id atmel_twi_dt_ids[] = { > @@ -883,6 +927,9 @@ static const struct of_device_id atmel_twi_dt_ids[] = { > .compatible = "atmel,at91sam9x5-i2c", > .data = &at91sam9x5_config, > }, { > + .compatible = "atmel,sama5d4-i2c", > + .data = &sama5d4_config, > + }, { > .compatible = "atmel,sama5d2-i2c", > .data = &sama5d2_config, > }, { > -- Nicolas Ferre -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/