Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1759622AbbLCKmH (ORCPT ); Thu, 3 Dec 2015 05:42:07 -0500 Received: from fw-tnat.cambridge.arm.com ([217.140.96.140]:22325 "EHLO cam-smtp0.cambridge.arm.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1755436AbbLCKmB (ORCPT ); Thu, 3 Dec 2015 05:42:01 -0500 From: Liviu Dudau To: David Airlie , Catalin Marinas , Will Deacon , Rob Herring , Sudeep Holla , Jon Medhurst , Mark Rutland , Ian Campbell , Kumar Gala , Rob Herring , Russell King Cc: Pawel Moll , Arnd Bergmann , Olof Johansson , Punit Agrawal , DRI devel , devicetree , Greg Kroah-Hartman , Andrew Morton , LAKML , LKML Subject: [PATCH v4 1/4] drm: arm: Add DT bindings documentation for HDLCD driver. Date: Thu, 3 Dec 2015 10:40:46 +0000 Message-Id: <1449139249-9171-2-git-send-email-Liviu.Dudau@arm.com> X-Mailer: git-send-email 2.6.2 In-Reply-To: <1449139249-9171-1-git-send-email-Liviu.Dudau@arm.com> References: <1449139249-9171-1-git-send-email-Liviu.Dudau@arm.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3095 Lines: 105 Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Kumar Gala Signed-off-by: Liviu Dudau Acked-by: Rob Herring --- .../devicetree/bindings/display/arm,hdlcd.txt | 79 ++++++++++++++++++++++ 1 file changed, 79 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/arm,hdlcd.txt diff --git a/Documentation/devicetree/bindings/display/arm,hdlcd.txt b/Documentation/devicetree/bindings/display/arm,hdlcd.txt new file mode 100644 index 0000000..78bc242 --- /dev/null +++ b/Documentation/devicetree/bindings/display/arm,hdlcd.txt @@ -0,0 +1,79 @@ +ARM HDLCD + +This is a display controller found on several development platforms produced +by ARM Ltd and in more modern of its' Fast Models. The HDLCD is an RGB +streamer that reads the data from a framebuffer and sends it to a single +digital encoder (DVI or HDMI). + +Required properties: + - compatible: "arm,hdlcd" + - reg: Physical base address and length of the controller's registers. + - interrupts: One interrupt used by the display controller to notify the + interrupt controller when any of the interrupt sources programmed in + the interrupt mask register have activated. + - clocks: A list of phandle + clock-specifier pairs, one for each + entry in 'clock-names'. + - clock-names: A list of clock names. For HDLCD it should contain: + - "pxlclk" for the clock feeding the output PLL of the controller. + +Required sub-nodes: + - port: The HDLCD connection to an encoder chip. The connection is modeled + using the OF graph bindings specified in + Documentation/devicetree/bindings/graph.txt. + +Optional properties: + - memory-region: phandle to a node describing memory (see + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) to be + used for the framebuffer; if not present, the framebuffer may be located + anywhere in memory. + + +Example: + +/ { + ... + + hdlcd@2b000000 { + compatible = "arm,hdlcd"; + reg = <0 0x2b000000 0 0x1000>; + interrupts = ; + clocks = <&oscclk5>; + clock-names = "pxlclk"; + port { + hdlcd_output: endpoint@0 { + remote-endpoint = <&hdmi_enc_input>; + }; + }; + }; + + /* HDMI encoder on I2C bus */ + i2c@7ffa0000 { + .... + hdmi-transmitter@70 { + compatible = "....."; + reg = <0x70>; + port@0 { + hdmi_enc_input: endpoint { + remote-endpoint = <&hdlcd_output>; + }; + + hdmi_enc_output: endpoint { + remote-endpoint = <&hdmi_1_port>; + }; + }; + }; + + }; + + hdmi1: connector@1 { + compatible = "hdmi-connector"; + type = "a"; + port { + hdmi_1_port: endpoint { + remote-endpoint = <&hdmi_enc_output>; + }; + }; + }; + + ... +}; -- 2.6.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/