Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1760455AbbLCQVa (ORCPT ); Thu, 3 Dec 2015 11:21:30 -0500 Received: from foss.arm.com ([217.140.101.70]:50020 "EHLO foss.arm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1759904AbbLCQV3 (ORCPT ); Thu, 3 Dec 2015 11:21:29 -0500 Message-ID: <56606C02.3050702@arm.com> Date: Thu, 03 Dec 2015 16:21:22 +0000 From: Marc Zyngier Organization: ARM Ltd User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Icedove/31.7.0 MIME-Version: 1.0 To: MaJun , linux-arm-kernel@lists.infradead.org, mark.rutland@arm.com CC: Catalin.Marinas@arm.com, linux-kernel@vger.kernel.org, Will.Deacon@arm.com, jason@lakedaemon.net, tglx@linutronix.de, lizefan@huawei.com, huxinwei@huawei.com, dingtianhong@huawei.com, zhaojunhua@hisilicon.com, liguozhu@hisilicon.com, xuwei5@hisilicon.com, wei.chenwei@hisilicon.com, guohanjun@huawei.com, wuyun.wu@huawei.com, guodong.xu@linaro.org, haojian.zhuang@linaro.org, zhangfei.gao@linaro.org, usman.ahmad@linaro.org, klimov.linux@gmail.com, gabriele.paoloni@huawei.com Subject: Re: [PATCH v9 1/4] dt-binding:Documents of the mbigen bindings References: <1448248513-39760-1-git-send-email-majun258@huawei.com> <1448248513-39760-2-git-send-email-majun258@huawei.com> In-Reply-To: <1448248513-39760-2-git-send-email-majun258@huawei.com> Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3518 Lines: 108 On 23/11/15 03:15, MaJun wrote: > From: Ma Jun > > Add the mbigen msi interrupt controller bindings document. > > This patch based on Mark Rutland's patch > https://lkml.org/lkml/2015/7/23/558 > > Signed-off-by: Ma Jun > --- Mark, Do you mind having a look at this from a DT perspective? Thanks, M. > Documentation/devicetree/bindings/arm/mbigen.txt | 69 ++++++++++++++++++++++ > 1 files changed, 69 insertions(+), 0 deletions(-) > create mode 100644 Documentation/devicetree/bindings/arm/mbigen.txt > > diff --git a/Documentation/devicetree/bindings/arm/mbigen.txt b/Documentation/devicetree/bindings/arm/mbigen.txt > new file mode 100644 > index 0000000..8ae59a9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/mbigen.txt > @@ -0,0 +1,69 @@ > +Hisilicon mbigen device tree bindings. > +======================================= > + > +Mbigen means: message based interrupt generator. > + > +MBI is kind of msi interrupt only used on Non-PCI devices. > + > +To reduce the wired interrupt number connected to GIC, > +Hisilicon designed mbigen to collect and generate interrupt. > + > + > +Non-pci devices can connect to mbigen and generate the > +interrupt by writing ITS register. > + > +The mbigen chip and devices connect to mbigen have the following properties: > + > +Mbigen main node required properties: > +------------------------------------------- > +- compatible: Should be "hisilicon,mbigen-v2" > +- reg: Specifies the base physical address and size of the Mbigen > + registers. > +- interrupt controller: Identifies the node as an interrupt controller > +- msi-parent: This property has two cells. > + The 1st cell specifies the ITS this device connected. > + The 2nd cell specifies the device id. > +- num-msis:Specifies the total number of interrupt this device has. > +- #interrupt-cells : Specifies the number of cells needed to encode an > + interrupt source. The value must be 2. > + > + The 1st cell is global hardware pin number of the interrupt. > + This value depends on the Soc design. > + > + The 2nd cell is the interrupt trigger type. > + The value of this cell should be: > + 1: rising edge triggered > + or > + 4: high level triggered > + > +Examples: > + > + mbigen_device_gmac:intc { > + compatible = "hisilicon,mbigen-v2"; > + reg = <0x0 0xc0080000 0x0 0x10000>; > + interrupt-controller; > + msi-parent = <&its_dsa 0x40b1c>; > + num-msis = <9>; > + #interrupt-cells = <2>; > + }; > + > +Devices connect to mbigen required properties: > +---------------------------------------------------- > +-interrupt-parent: Specifies the mbigen device node which device connected. > +-interrupts:specifies the interrupt source. > + The 1st cell is global hardware pin number of the interrupt. > + This value depends on the Soc design. > + The 2nd cell is the interrupt trigger type(rising edge triggered or high > + level triggered) > + > +Examples: > + gmac0: ethernet@c2080000 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0 0xc2080000 0 0x20000>, > + <0 0xc0000000 0 0x1000>; > + interrupt-parent = <&mbigen_device_gmac>; > + interrupts = <656 1>, > + <657 1>; > + }; > + > -- Jazz is not dead. It just smells funny... -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/