Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932157AbbLGNtK (ORCPT ); Mon, 7 Dec 2015 08:49:10 -0500 Received: from internet2.beckhoff.com ([194.25.186.210]:61993 "EHLO internet2.beckhoff.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932083AbbLGNtH convert rfc822-to-8bit (ORCPT ); Mon, 7 Dec 2015 08:49:07 -0500 From: To: , CC: , , , , , , , , , =?UTF-8?q?Patrick=20Br=C3=BCnn?= Subject: Re: [PATCH] ARM: dts: imx53: fix EIM_D27/29 pad UART2 configuration Date: Mon, 7 Dec 2015 14:48:04 +0100 Message-ID: <1449496084-11122-1-git-send-email-linux-kernel-dev@beckhoff.com> X-Mailer: git-send-email 1.9.1 MIME-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 8BIT X-Originating-IP: [172.17.64.207] X-OLX-Disclaimer: Done Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5633 Lines: 104 From: Patrick Brünn On Tue, Dec 1, 2015 at 20:52:25 PST, shawnguo@kernel.org wrote: > On Thu, Nov 26, 2015 at 11:59:15AM +0100, linux-kernel-dev@beckhoff.com wrote: >> MX53_PAD_EIM_D27__UART2_RXD_MUX and MX53_PAD_EIM_D29__UART2_RTS input_val must be configured as 0 instead of 1 to have UART2 muxed on EIM pins working > > I'm not sure why you think that. But the i.MX53 Reference Manual in my hands doesn't agree with that. It says ... >> >> Signed-off-by: Patrick Brünn >> --- >> arch/arm/boot/dts/imx53-pinfunc.h | 4 ++-- >> 1 file changed, 2 insertions(+), 2 deletions(-) >> >> diff --git a/arch/arm/boot/dts/imx53-pinfunc.h b/arch/arm/boot/dts/imx53-pinfunc.h >> index aec406b..a4c973d 100644 >> --- a/arch/arm/boot/dts/imx53-pinfunc.h >> +++ b/arch/arm/boot/dts/imx53-pinfunc.h >> @@ -532,7 +532,7 @@ >> #define MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x144 0x48c 0x000 0x7 0x0 >> #define MX53_PAD_EIM_D27__EMI_WEIM_D_27 0x148 0x490 0x000 0x0 0x0 >> #define MX53_PAD_EIM_D27__GPIO3_27 0x148 0x490 0x000 0x1 0x0 >> -#define MX53_PAD_EIM_D27__UART2_RXD_MUX 0x148 0x490 0x880 0x2 0x1 >> +#define MX53_PAD_EIM_D27__UART2_RXD_MUX 0x148 0x490 0x880 0x2 0x0 > > IOMUXC_UART2_IPP_UART_RXD_MUX_SELECT_INPUT DAISY field descriptions > > 000 - Selecting Pad: EIM_D26 for Mode: ALT2. > 001 - Selecting Pad: EIM_D27 for Mode: ALT2. > 010 - Selecting Pad: PATA_DMARQ for Mode: ALT3. > 011 - Selecting Pad: PATA_BUFFER_EN for Mode: ALT3. > 100 - Selecting Pad: GPIO_7 for Mode: ALT4. > 101 - Selecting Pad: GPIO_8 for Mode: ALT4. Thanks for the hint. I had a closer look at the reference manual and our schematics. Of course, you are right. The defines are good as they are, my patch was stupid. I just realized RXD and TXD are inverted on our hardware (CX9020 Embedded PC). Which requires a pinmux configuration like this: EIM_D26->UART2_RXD EIM_D27->UART2_TXD EIM_D28->UART2_RTS EIM_D29->UART2_CTS In my opinion the reference manual allows such a configuration, but I am not sure if it's appropriate for mainline. Would you accept a patch like the following: >8------------------------------------------------------8< ARM: dts: imx53: add EIM pad config for UART2 Add another pinmux configuration to mux UART2 on EIM pads: EIM_D26->UART2_RXD EIM_D27->UART2_TXD EIM_D28->UART2_RTS EIM_D29->UART2_CTS Signed-off-by: Patrick Brünn --- arch/arm/boot/dts/imx53-pinfunc.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/imx53-pinfunc.h b/arch/arm/boot/dts/imx53-pinfunc.h index aec406b..7d26d16 100644 --- a/arch/arm/boot/dts/imx53-pinfunc.h +++ b/arch/arm/boot/dts/imx53-pinfunc.h @@ -525,6 +525,7 @@ #define MX53_PAD_EIM_D26__EMI_WEIM_D_26 0x144 0x48c 0x000 0x0 0x0 #define MX53_PAD_EIM_D26__GPIO3_26 0x144 0x48c 0x000 0x1 0x0 #define MX53_PAD_EIM_D26__UART2_TXD_MUX 0x144 0x48c 0x000 0x2 0x0 +#define MX53_PAD_EIM_D26__UART2_RXD_MUX 0x144 0x48c 0x880 0x2 0x0 #define MX53_PAD_EIM_D26__FIRI_RXD 0x144 0x48c 0x80c 0x3 0x0 #define MX53_PAD_EIM_D26__IPU_CSI0_D_1 0x144 0x48c 0x000 0x4 0x0 #define MX53_PAD_EIM_D26__IPU_DI1_PIN11 0x144 0x48c 0x000 0x5 0x0 @@ -532,6 +533,7 @@ #define MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x144 0x48c 0x000 0x7 0x0 #define MX53_PAD_EIM_D27__EMI_WEIM_D_27 0x148 0x490 0x000 0x0 0x0 #define MX53_PAD_EIM_D27__GPIO3_27 0x148 0x490 0x000 0x1 0x0 +#define MX53_PAD_EIM_D27__UART2_TXD_MUX 0x148 0x490 0x000 0x2 0x0 #define MX53_PAD_EIM_D27__UART2_RXD_MUX 0x148 0x490 0x880 0x2 0x1 #define MX53_PAD_EIM_D27__FIRI_TXD 0x148 0x490 0x000 0x3 0x0 #define MX53_PAD_EIM_D27__IPU_CSI0_D_0 0x148 0x490 0x000 0x4 0x0 @@ -541,6 +543,7 @@ #define MX53_PAD_EIM_D28__EMI_WEIM_D_28 0x14c 0x494 0x000 0x0 0x0 #define MX53_PAD_EIM_D28__GPIO3_28 0x14c 0x494 0x000 0x1 0x0 #define MX53_PAD_EIM_D28__UART2_CTS 0x14c 0x494 0x000 0x2 0x0 +#define MX53_PAD_EIM_D28__UART2_RTS 0x14c 0x494 0x87c 0x2 0x0 #define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO 0x14c 0x494 0x82c 0x3 0x1 #define MX53_PAD_EIM_D28__CSPI_MOSI 0x14c 0x494 0x788 0x4 0x1 #define MX53_PAD_EIM_D28__I2C1_SDA 0x14c 0x494 0x818 0x5 0x1 @@ -548,6 +551,7 @@ #define MX53_PAD_EIM_D28__IPU_DI0_PIN13 0x14c 0x494 0x000 0x7 0x0 #define MX53_PAD_EIM_D29__EMI_WEIM_D_29 0x150 0x498 0x000 0x0 0x0 #define MX53_PAD_EIM_D29__GPIO3_29 0x150 0x498 0x000 0x1 0x0 +#define MX53_PAD_EIM_D29__UART2_CTS 0x150 0x498 0x000 0x2 0x0 #define MX53_PAD_EIM_D29__UART2_RTS 0x150 0x498 0x87c 0x2 0x1 #define MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS 0x150 0x498 0x000 0x3 0x0 #define MX53_PAD_EIM_D29__CSPI_SS0 0x150 0x498 0x78c 0x4 0x2 -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/