Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756013AbbLGO6D (ORCPT ); Mon, 7 Dec 2015 09:58:03 -0500 Received: from mail.linuxfoundation.org ([140.211.169.12]:59009 "EHLO mail.linuxfoundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755025AbbLGO57 (ORCPT ); Mon, 7 Dec 2015 09:57:59 -0500 From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Sourav Poddar , Tony Lindgren Subject: [PATCH 4.2 038/124] ARM: dts: Fix WLAN regression on omap5-uevm Date: Mon, 7 Dec 2015 09:55:28 -0500 Message-Id: <20151207144921.579587774@linuxfoundation.org> X-Mailer: git-send-email 2.6.3 In-Reply-To: <20151207144919.656035367@linuxfoundation.org> References: <20151207144919.656035367@linuxfoundation.org> User-Agent: quilt/0.64 MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-15 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4881 Lines: 160 4.2-stable review patch. If anyone has any objections, please let me know. ------------------ From: Tony Lindgren commit 0efc898a9bea7a2e8e583c6efab0e19dc7093078 upstream. Commit 99f84cae43df ("ARM: dts: add wl12xx/wl18xx bindings") added device tree bindings for the TI WLAN SDIO on many omap variants. I recall wondering how come omap5-uevm did not have the WLAN added and this issue has been bugging me for a while now, and I finally tracked it down to a bad pinmux regression, and a missing deferred probe handling for the 32k clock from palmas that's requested by twl6040. Basically 392adaf796b9 ("ARM: dts: omap5-evm: Add mcspi data") added pin muxing for mcspi4 that conflicts with the onboard WLAN. While some omap5-uevm don't have WLAN populated, the pins are not reused for other devices. And as the SDIO bus should be probed, let's try to enable WLAN by default. Let's fix the regression and add the WLAN configuration as done for the other boards in 99f84cae43df ("ARM: dts: add wl12xx/wl18xx bindings"). And let's use the new MMC pwrseq for the 32k clock as suggested by Javier Martinez Canillas . Note that without a related deferred probe fix for twl6040, the 32k clock is not initialized if palmas-clk is a module and twl6040 is built-in. Let's also use the generic "non-removable" instead of the legacy "ti,non-removable" property while at it. And finally, note that omap5 seems to require WAKEUP_EN for the WLAN GPIO interrupt. Fixes: 392adaf796b9 ("ARM: dts: omap5-evm: Add mcspi data") Cc: Sourav Poddar Signed-off-by: Tony Lindgren Signed-off-by: Greg Kroah-Hartman --- arch/arm/boot/dts/omap5-uevm.dts | 66 ++++++++++++++++++++++++++++++++------- 1 file changed, 55 insertions(+), 11 deletions(-) --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -31,6 +31,24 @@ regulator-max-microvolt = <3000000>; }; + mmc3_pwrseq: sdhci0_pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&clk32kgaudio>; + clock-names = "ext_clock"; + }; + + vmmcsdio_fixed: fixedregulator-mmcsdio { + compatible = "regulator-fixed"; + regulator-name = "vmmcsdio_fixed"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio5 12 GPIO_ACTIVE_HIGH>; /* gpio140 WLAN_EN */ + enable-active-high; + startup-delay-us = <70000>; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_pins>; + }; + /* HS USB Host PHY on PORT 2 */ hsusb2_phy: hsusb2_phy { compatible = "usb-nop-xceiv"; @@ -197,12 +215,20 @@ >; }; - mcspi4_pins: pinmux_mcspi4_pins { + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */ + OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */ + OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */ + OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */ + OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */ + OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */ + >; + }; + + wlan_pins: pinmux_wlan_pins { pinctrl-single,pins = < - 0x164 (PIN_INPUT | MUX_MODE1) /* mcspi4_clk */ - 0x168 (PIN_INPUT | MUX_MODE1) /* mcspi4_simo */ - 0x16a (PIN_INPUT | MUX_MODE1) /* mcspi4_somi */ - 0x16c (PIN_INPUT | MUX_MODE1) /* mcspi4_cs0 */ + OMAP5_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE6) /* mcspi1_clk.gpio5_140 */ >; }; @@ -276,6 +302,12 @@ 0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */ >; }; + + wlcore_irq_pin: pinmux_wlcore_irq_pin { + pinctrl-single,pins = < + OMAP5_IOPAD(0x040, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */ + >; + }; }; &mmc1 { @@ -290,8 +322,25 @@ }; &mmc3 { + vmmc-supply = <&vmmcsdio_fixed>; + mmc-pwrseq = <&mmc3_pwrseq>; bus-width = <4>; - ti,non-removable; + non-removable; + cap-power-off-card; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins &wlcore_irq_pin>; + interrupts-extended = <&gic GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH + &omap5_pmx_core 0x168>; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio1>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; /* gpio 14 */ + ref-clock-frequency = <26000000>; + }; }; &mmc4 { @@ -591,11 +640,6 @@ pinctrl-0 = <&mcspi3_pins>; }; -&mcspi4 { - pinctrl-names = "default"; - pinctrl-0 = <&mcspi4_pins>; -}; - &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>; -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/