Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932470AbbLGSRW (ORCPT ); Mon, 7 Dec 2015 13:17:22 -0500 Received: from relay3-d.mail.gandi.net ([217.70.183.195]:54000 "EHLO relay3-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754942AbbLGSRU (ORCPT ); Mon, 7 Dec 2015 13:17:20 -0500 X-Originating-IP: 81.57.43.44 Date: Mon, 7 Dec 2015 19:17:52 +0100 From: Remi Pommarel To: Stefan Wahren Cc: Stephen Warren , Eric Anholt , Lee Jones , Michael Turquette , Stephen Boyd , Rob Herring , linux-kernel@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-clk@vger.kernel.org Subject: Re: [PATCH v3 4/4] clk: bcm2835: Add PWM clock support to the device tree Message-ID: <20151207181752.GA453@cruxbox> References: <1449418969-5565-1-git-send-email-repk@triplefau.lt> <1449418969-5565-5-git-send-email-repk@triplefau.lt> <5664A5A9.4030204@lategoodbye.de> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <5664A5A9.4030204@lategoodbye.de> User-Agent: Mutt/1.5.21 (2010-09-15) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1795 Lines: 62 Hi Stefan, On Sun, Dec 06, 2015 at 10:16:25PM +0100, Stefan Wahren wrote: > Hi Remi, > > please send this patch to devicetree@vger.kernel.org. Ok, just to be sure I understand the process here. I should resend a new version of the whole patchset including the devicetree mailing list as recipent. Then the first 3 patches will eventually get pushed by a clock subsystem maintainer. And finally this last patch will be pushed by a devicetree maintainer. Am I right here ? > > Am 06.12.2015 um 17:22 schrieb Remi Pommarel: > >Signed-off-by: Remi Pommarel > >--- > > arch/arm/boot/dts/bcm2835-rpi.dtsi | 4 ++++ > > arch/arm/boot/dts/bcm2835.dtsi | 9 +++++++++ > > 2 files changed, 13 insertions(+) > > > >diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi > >index 3572f03..55801e0 100644 > >--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi > >+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi > >@@ -60,3 +60,7 @@ > > status = "okay"; > > bus-width = <4>; > > }; > >+ > >+&pwm { > >+ status = "okay"; > >+}; > >diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi > >index aef64de..641f7f4 100644 > >--- a/arch/arm/boot/dts/bcm2835.dtsi > >+++ b/arch/arm/boot/dts/bcm2835.dtsi > >@@ -149,6 +149,15 @@ > > status = "disabled"; > > }; > > > >+ pwm: pwm@7e20c000 { > >+ compatible = "brcm,bcm2835-pwm"; > >+ reg = <0x7e20c000 0x28>; > >+ clocks = <&clocks BCM2835_CLOCK_PWM>; > > Looks like #pwm-cells is missing. > Yes will do. Thank you. Regards -- Remi -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/