Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S964844AbbLHMJP (ORCPT ); Tue, 8 Dec 2015 07:09:15 -0500 Received: from mail-lf0-f54.google.com ([209.85.215.54]:36232 "EHLO mail-lf0-f54.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751354AbbLHMJN (ORCPT ); Tue, 8 Dec 2015 07:09:13 -0500 Date: Tue, 8 Dec 2015 15:09:11 +0300 From: Aleksei Mamlin To: Irina Tirdea Cc: Dmitry Torokhov , Bastien Nocera , Karsten Merker , linux-input@vger.kernel.org, Mark Rutland , Rob Herring , Octavian Purdila , linux-kernel@vger.kernel.org, devicetree@vger.kernel.org Subject: Re: [PATCH v11 3/8] Input: goodix - write configuration data to device Message-Id: <20151208150911.889b448593ada25f55618313@gmail.com> In-Reply-To: <1447936001-21420-4-git-send-email-irina.tirdea@intel.com> References: <1447936001-21420-1-git-send-email-irina.tirdea@intel.com> <1447936001-21420-4-git-send-email-irina.tirdea@intel.com> X-Mailer: Sylpheed 3.4.2 (GTK+ 2.24.28; x86_64-pc-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 11901 Lines: 403 On Thu, 19 Nov 2015 14:26:36 +0200 Irina Tirdea wrote: > Goodix devices can be configured by writing custom data to the device at > init. The configuration data is read with request_firmware from > "goodix__cfg.bin", where is the product id read from the device > (e.g.: goodix_911_cfg.bin for Goodix GT911, goodix_9271_cfg.bin for > GT9271). > > The configuration information has a specific format described in the Goodix > datasheet. It includes X/Y resolution, maximum supported touch points, > interrupt flags, various sensitivity factors and settings for advanced > features (like gesture recognition). > > Before writing the firmware, it is necessary to reset the device. If > the device ACPI/DT information does not declare gpio pins (needed for > reset), writing the firmware will not be available for these devices. > > This is based on Goodix datasheets for GT911 and GT9271 and on Goodix > driver gt9xx.c for Android (publicly available in Android kernel > trees for various devices). > > Signed-off-by: Octavian Purdila > Signed-off-by: Irina Tirdea Tested-by: Aleksei Mamlin > --- > drivers/input/touchscreen/goodix.c | 247 ++++++++++++++++++++++++++++++++----- > 1 file changed, 215 insertions(+), 32 deletions(-) > > diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c > index 4744032..0911b0c9 100644 > --- a/drivers/input/touchscreen/goodix.c > +++ b/drivers/input/touchscreen/goodix.c > @@ -16,6 +16,7 @@ > > #include > #include > +#include > #include > #include > #include > @@ -40,6 +41,10 @@ struct goodix_ts_data { > int cfg_len; > struct gpio_desc *gpiod_int; > struct gpio_desc *gpiod_rst; > + u16 id; > + u16 version; > + char *cfg_name; > + struct completion firmware_loading_complete; > }; > > #define GOODIX_GPIO_INT_NAME "irq" > @@ -124,6 +129,39 @@ static int goodix_i2c_read(struct i2c_client *client, > return ret < 0 ? ret : (ret != ARRAY_SIZE(msgs) ? -EIO : 0); > } > > +/** > + * goodix_i2c_write - write data to a register of the i2c slave device. > + * > + * @client: i2c device. > + * @reg: the register to write to. > + * @buf: raw data buffer to write. > + * @len: length of the buffer to write > + */ > +static int goodix_i2c_write(struct i2c_client *client, u16 reg, const u8 *buf, > + unsigned len) > +{ > + u8 *addr_buf; > + struct i2c_msg msg; > + int ret; > + > + addr_buf = kmalloc(len + 2, GFP_KERNEL); > + if (!addr_buf) > + return -ENOMEM; > + > + addr_buf[0] = reg >> 8; > + addr_buf[1] = reg & 0xFF; > + memcpy(&addr_buf[2], buf, len); > + > + msg.flags = 0; > + msg.addr = client->addr; > + msg.buf = addr_buf; > + msg.len = len + 2; > + > + ret = i2c_transfer(client->adapter, &msg, 1); > + kfree(addr_buf); > + return ret < 0 ? ret : (ret != 1 ? -EIO : 0); > +} > + > static int goodix_get_cfg_len(u16 id) > { > switch (id) { > @@ -243,6 +281,73 @@ static irqreturn_t goodix_ts_irq_handler(int irq, void *dev_id) > return IRQ_HANDLED; > } > > +/** > + * goodix_check_cfg - Checks if config fw is valid > + * > + * @ts: goodix_ts_data pointer > + * @cfg: firmware config data > + */ > +static int goodix_check_cfg(struct goodix_ts_data *ts, > + const struct firmware *cfg) > +{ > + int i, raw_cfg_len; > + u8 check_sum = 0; > + > + if (cfg->size > GOODIX_CONFIG_MAX_LENGTH) { > + dev_err(&ts->client->dev, > + "The length of the config fw is not correct"); > + return -EINVAL; > + } > + > + raw_cfg_len = cfg->size - 2; > + for (i = 0; i < raw_cfg_len; i++) > + check_sum += cfg->data[i]; > + check_sum = (~check_sum) + 1; > + if (check_sum != cfg->data[raw_cfg_len]) { > + dev_err(&ts->client->dev, > + "The checksum of the config fw is not correct"); > + return -EINVAL; > + } > + > + if (cfg->data[raw_cfg_len + 1] != 1) { > + dev_err(&ts->client->dev, > + "Config fw must have Config_Fresh register set"); > + return -EINVAL; > + } > + > + return 0; > +} > + > +/** > + * goodix_send_cfg - Write fw config to device > + * > + * @ts: goodix_ts_data pointer > + * @cfg: config firmware to write to device > + */ > +static int goodix_send_cfg(struct goodix_ts_data *ts, > + const struct firmware *cfg) > +{ > + int error; > + > + error = goodix_check_cfg(ts, cfg); > + if (error) > + return error; > + > + error = goodix_i2c_write(ts->client, GOODIX_REG_CONFIG_DATA, cfg->data, > + cfg->size); > + if (error) { > + dev_err(&ts->client->dev, "Failed to write config data: %d", > + error); > + return error; > + } > + dev_dbg(&ts->client->dev, "Config sent successfully."); > + > + /* Let the firmware reconfigure itself, so sleep for 10ms */ > + usleep_range(10000, 11000); > + > + return 0; > +} > + > static int goodix_int_sync(struct goodix_ts_data *ts) > { > int error; > @@ -371,30 +476,29 @@ static void goodix_read_config(struct goodix_ts_data *ts) > /** > * goodix_read_version - Read goodix touchscreen version > * > - * @client: the i2c client > - * @version: output buffer containing the version on success > - * @id: output buffer containing the id on success > + * @ts: our goodix_ts_data pointer > */ > -static int goodix_read_version(struct i2c_client *client, u16 *version, u16 *id) > +static int goodix_read_version(struct goodix_ts_data *ts) > { > int error; > u8 buf[6]; > char id_str[5]; > > - error = goodix_i2c_read(client, GOODIX_REG_ID, buf, sizeof(buf)); > + error = goodix_i2c_read(ts->client, GOODIX_REG_ID, buf, sizeof(buf)); > if (error) { > - dev_err(&client->dev, "read version failed: %d\n", error); > + dev_err(&ts->client->dev, "read version failed: %d\n", error); > return error; > } > > memcpy(id_str, buf, 4); > id_str[4] = 0; > - if (kstrtou16(id_str, 10, id)) > - *id = 0x1001; > + if (kstrtou16(id_str, 10, &ts->id)) > + ts->id = 0x1001; > > - *version = get_unaligned_le16(&buf[4]); > + ts->version = get_unaligned_le16(&buf[4]); > > - dev_info(&client->dev, "ID %d, version: %04x\n", *id, *version); > + dev_info(&ts->client->dev, "ID %d, version: %04x\n", ts->id, > + ts->version); > > return 0; > } > @@ -428,13 +532,10 @@ static int goodix_i2c_test(struct i2c_client *client) > * goodix_request_input_dev - Allocate, populate and register the input device > * > * @ts: our goodix_ts_data pointer > - * @version: device firmware version > - * @id: device ID > * > * Must be called during probe > */ > -static int goodix_request_input_dev(struct goodix_ts_data *ts, u16 version, > - u16 id) > +static int goodix_request_input_dev(struct goodix_ts_data *ts) > { > int error; > > @@ -458,8 +559,8 @@ static int goodix_request_input_dev(struct goodix_ts_data *ts, u16 version, > ts->input_dev->phys = "input/ts"; > ts->input_dev->id.bustype = BUS_I2C; > ts->input_dev->id.vendor = 0x0416; > - ts->input_dev->id.product = id; > - ts->input_dev->id.version = version; > + ts->input_dev->id.product = ts->id; > + ts->input_dev->id.version = ts->version; > > error = input_register_device(ts->input_dev); > if (error) { > @@ -471,13 +572,70 @@ static int goodix_request_input_dev(struct goodix_ts_data *ts, u16 version, > return 0; > } > > +/** > + * goodix_configure_dev - Finish device initialization > + * > + * @ts: our goodix_ts_data pointer > + * > + * Must be called from probe to finish initialization of the device. > + * Contains the common initialization code for both devices that > + * declare gpio pins and devices that do not. It is either called > + * directly from probe or from request_firmware_wait callback. > + */ > +static int goodix_configure_dev(struct goodix_ts_data *ts) > +{ > + int error; > + unsigned long irq_flags; > + > + goodix_read_config(ts); > + > + error = goodix_request_input_dev(ts); > + if (error) > + return error; > + > + irq_flags = goodix_irq_flags[ts->int_trigger_type] | IRQF_ONESHOT; > + error = devm_request_threaded_irq(&ts->client->dev, ts->client->irq, > + NULL, goodix_ts_irq_handler, > + irq_flags, ts->client->name, ts); > + if (error) { > + dev_err(&ts->client->dev, "request IRQ failed: %d\n", error); > + return error; > + } > + > + return 0; > +} > + > +/** > + * goodix_config_cb - Callback to finish device init > + * > + * @ts: our goodix_ts_data pointer > + * > + * request_firmware_wait callback that finishes > + * initialization of the device. > + */ > +static void goodix_config_cb(const struct firmware *cfg, void *ctx) > +{ > + struct goodix_ts_data *ts = (struct goodix_ts_data *)ctx; > + int error; > + > + if (cfg) { > + /* send device configuration to the firmware */ > + error = goodix_send_cfg(ts, cfg); > + if (error) > + goto err_release_cfg; > + } > + goodix_configure_dev(ts); > + > +err_release_cfg: > + release_firmware(cfg); > + complete_all(&ts->firmware_loading_complete); > +} > + > static int goodix_ts_probe(struct i2c_client *client, > const struct i2c_device_id *id) > { > struct goodix_ts_data *ts; > - unsigned long irq_flags; > int error; > - u16 version_info, id_info; > > dev_dbg(&client->dev, "I2C Address: 0x%02x\n", client->addr); > > @@ -492,6 +650,7 @@ static int goodix_ts_probe(struct i2c_client *client, > > ts->client = client; > i2c_set_clientdata(client, ts); > + init_completion(&ts->firmware_loading_complete); > > error = goodix_get_gpio_config(ts); > if (error) > @@ -512,29 +671,52 @@ static int goodix_ts_probe(struct i2c_client *client, > return error; > } > > - error = goodix_read_version(client, &version_info, &id_info); > + error = goodix_read_version(ts); > if (error) { > dev_err(&client->dev, "Read version failed.\n"); > return error; > } > > - ts->cfg_len = goodix_get_cfg_len(id_info); > - > - goodix_read_config(ts); > + ts->cfg_len = goodix_get_cfg_len(ts->id); > > - error = goodix_request_input_dev(ts, version_info, id_info); > - if (error) > - return error; > + if (ts->gpiod_int && ts->gpiod_rst) { > + /* update device config */ > + ts->cfg_name = kasprintf(GFP_KERNEL, "goodix_%d_cfg.bin", > + ts->id); > + if (!ts->cfg_name) > + return -ENOMEM; > + > + error = request_firmware_nowait(THIS_MODULE, true, ts->cfg_name, > + &client->dev, GFP_KERNEL, ts, > + goodix_config_cb); > + if (error) { > + dev_err(&client->dev, > + "Failed to invoke firmware loader: %d\n", > + error); > + goto err_free_cfg_name; > + } > > - irq_flags = goodix_irq_flags[ts->int_trigger_type] | IRQF_ONESHOT; > - error = devm_request_threaded_irq(&ts->client->dev, client->irq, > - NULL, goodix_ts_irq_handler, > - irq_flags, client->name, ts); > - if (error) { > - dev_err(&client->dev, "request IRQ failed: %d\n", error); > - return error; > + return 0; > } > > + return goodix_configure_dev(ts); > + > +err_free_cfg_name: > + if (ts->gpiod_int && ts->gpiod_rst) > + kfree(ts->cfg_name); > + return error; > +} > + > +static int goodix_ts_remove(struct i2c_client *client) > +{ > + struct goodix_ts_data *ts = i2c_get_clientdata(client); > + > + if (!ts->gpiod_int || !ts->gpiod_rst) > + return 0; > + > + wait_for_completion(&ts->firmware_loading_complete); > + kfree(ts->cfg_name); > + > return 0; > } > > @@ -568,6 +750,7 @@ MODULE_DEVICE_TABLE(of, goodix_of_match); > > static struct i2c_driver goodix_ts_driver = { > .probe = goodix_ts_probe, > + .remove = goodix_ts_remove, > .id_table = goodix_ts_id, > .driver = { > .name = "Goodix-TS", > -- > 1.9.1 > -- Thanks and regards, Aleksei Mamlin -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/