Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
	id S1753777AbbLIMqi (ORCPT <rfc822;w@1wt.eu>);
	Wed, 9 Dec 2015 07:46:38 -0500
Received: from seldrel01.sonyericsson.com ([37.139.156.2]:10373 "EHLO
	seldrel01.sonyericsson.com" rhost-flags-OK-OK-OK-OK)
	by vger.kernel.org with ESMTP id S1750808AbbLIMqX (ORCPT
	<rfc822;linux-kernel@vger.kernel.org>);
	Wed, 9 Dec 2015 07:46:23 -0500
From: Tim Bird <tim.bird@sonymobile.com>
To: <robh+dt@kernel.org>, <pawel.moll@arm.com>, <mark.rutland@arm.com>,
        <ijc+devicetree@hellion.org.uk>, <sre@kernel.org>,
        <courtney.cavin@sonymobile.com>, <dbaryshkov@gmail.com>,
        <dwmw2@infradead.org>, <agross@codeaurora.org>
CC: <Bjorn.Andersson@sonymobile.com>, <devicetree@vger.kernel.org>,
        <linux-pm@vger.kernel.org>, <linux-arm-msm@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>, <tbird20d@gmail.com>,
        <tim.bird@sonymobile.com>
Subject: [PATCH v3 1/3] dt-binding: power: Add otg regulator binding
Date: Wed, 9 Dec 2015 04:45:53 -0800
Message-ID: <1449665155-29322-2-git-send-email-tim.bird@sonymobile.com>
X-Mailer: git-send-email 2.6.3
In-Reply-To: <1449665155-29322-1-git-send-email-tim.bird@sonymobile.com>
References: <1449665155-29322-1-git-send-email-tim.bird@sonymobile.com>
MIME-Version: 1.0
Content-Type: text/plain
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org
Content-Length: 2177
Lines: 57

Add a binding for the regulator which controls the OTG chargepath switch.
The OTG switch gets its power from pm8941_5vs1, and that should be
expressed as a usb-otg-in-supply property in the DT node for the
charger driver.  The regulator name is "otg".

Signed-off-by: Tim Bird <tim.bird@sonymobile.com>
---
Changes since v1
 - switch supply name to have dashes instead of underscores
 - remove superfluous DT explanations in the otg node description
---
 .../devicetree/bindings/power_supply/qcom_smbb.txt    | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/Documentation/devicetree/bindings/power_supply/qcom_smbb.txt b/Documentation/devicetree/bindings/power_supply/qcom_smbb.txt
index 65b88fa..28b6da7 100644
--- a/Documentation/devicetree/bindings/power_supply/qcom_smbb.txt
+++ b/Documentation/devicetree/bindings/power_supply/qcom_smbb.txt
@@ -105,6 +105,22 @@ PROPERTIES
                regulation must be done externally to fully comply with
                the JEITA safety guidelines if this flag is set.
 
+- usb-otg-in-supply:
+  Usage: optional
+  Value type: <phandle>
+  Description: Reference to the regulator supplying power to the USB_OTG_IN
+               pin.
+
+child nodes:
+- otg:
+  Usage: optional
+  Description: This node defines a regulator used to control the direction
+               of VBUS voltage - specifically: whether to supply voltage
+               to VBUS for host mode operation of the OTG port, or allow
+               input voltage from external VBUS for charging.  In the
+               hardware, the supply for this regulator comes from
+               usb-otg-in-supply.
+
 EXAMPLE
 charger@1000 {
        compatible = "qcom,pm8941-charger";
@@ -128,4 +144,7 @@ charger@1000 {
 
        qcom,fast-charge-current-limit = <1000000>;
        qcom,dc-charge-current-limit = <1000000>;
+       usb-otg-in-supply = <&pm8941_5vs1>;
+
+       otg {};
 };
-- 
2.6.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/