Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754583AbbLKJ0G (ORCPT ); Fri, 11 Dec 2015 04:26:06 -0500 Received: from eusmtp01.atmel.com ([212.144.249.242]:34363 "EHLO eusmtp01.atmel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751395AbbLKJZu (ORCPT ); Fri, 11 Dec 2015 04:25:50 -0500 Subject: Re: [PATCH linux-next 4/5] Documentation: atmel-quadspi: add binding file for Atmel QSPI driver To: Cyrille Pitchen , , , References: CC: , , , , , , , , From: Nicolas Ferre X-Enigmail-Draft-Status: N1110 Organization: atmel Message-ID: <566A96B0.2010808@atmel.com> Date: Fri, 11 Dec 2015 10:26:08 +0100 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101 Thunderbird/38.4.0 MIME-Version: 1.0 In-Reply-To: Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: 8bit X-Originating-IP: [10.161.30.18] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2222 Lines: 65 Le 07/12/2015 15:09, Cyrille Pitchen a ?crit : > This patch documents the DT bindings for the driver of the Atmel QSPI > controller embedded inside sama5d2x SoCs. > > Signed-off-by: Cyrille Pitchen The change is very small from previous one and moreover accepted by Rob. So, for sure: Acked-by: Nicolas Ferre > --- > .../devicetree/bindings/mtd/atmel-quadspi.txt | 32 ++++++++++++++++++++++ > 1 file changed, 32 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mtd/atmel-quadspi.txt > > diff --git a/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt > new file mode 100644 > index 000000000000..e81f20f9faf1 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt > @@ -0,0 +1,32 @@ > +* Atmel Quad Serial Peripheral Interface (QSPI) > + > +Required properties: > +- compatible: Should be "atmel,sama5d2-qspi". > +- reg: Should contain the locations and lengths of the base registers > + and the mapped memory. > +- reg-names: Should contain the resource reg names: > + - qspi_base: configuration register address space > + - qspi_mmap: memory mapped address space > +- interrupts: Should contain the interrupt for the device. > +- clocks: The phandle of the clock needed by the QSPI controller. > +- #address-cells: Should be <1>. > +- #size-cells: Should be <0>. > + > +Example: > + > +spi@f0020000 { > + compatible = "atmel,sama5d2-qspi"; > + reg = <0xf0020000 0x100>, <0xd0000000 0x8000000>; > + reg-names = "qpsi_base", "qspi_mmap"; > + interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>; > + clocks = <&spi0_clk>; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_spi0_default>; > + status = "okay"; > + > + m25p80@0 { > + ... > + }; > +}; > -- Nicolas Ferre -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/