Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755083AbbLKKpi (ORCPT ); Fri, 11 Dec 2015 05:45:38 -0500 Received: from mx-rz-1.rrze.uni-erlangen.de ([131.188.11.20]:52635 "EHLO mx-rz-1.rrze.uni-erlangen.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753828AbbLKKnb (ORCPT ); Fri, 11 Dec 2015 05:43:31 -0500 X-RRZE-Submit-IP: 131.188.42.193 From: =?UTF-8?q?Frederik=20V=C3=B6lkel?= To: linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org Cc: jslaby@suse.com, gregkh@linuxfoundation.org, linux-kernel@i4.cs.fau.de, =?UTF-8?q?Frederik=20V=C3=B6lkel?= , Lukas Braun Subject: [PATCH 7/9] drivers: tty: 68328serial.c: remove trailing whitespaces Date: Fri, 11 Dec 2015 11:36:07 +0100 Message-Id: <1449830170-15096-8-git-send-email-frederik.voelkel@fau.de> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1449830170-15096-1-git-send-email-frederik.voelkel@fau.de> References: <1449830170-15096-1-git-send-email-frederik.voelkel@fau.de> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 10352 Lines: 364 This patch removes trailing whitespaces reported by checkpatch. Signed-off-by: Frederik Völkel Signed-off-by: Lukas Braun --- 5 trailing whitespaces issues are still left. We are not sure how to fix them. --- drivers/tty/serial/68328serial.c | 88 ++++++++++++++++++++-------------------- 1 file changed, 44 insertions(+), 44 deletions(-) diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c index 22f52e0..3e974d2 100644 --- a/drivers/tty/serial/68328serial.c +++ b/drivers/tty/serial/68328serial.c @@ -217,7 +217,7 @@ static void rs_stop(struct tty_struct *tty) if (serial_paranoia_check(info, tty->name, "rs_stop")) return; - + local_irq_save(flags); uart->ustcnt &= ~USTCNT_TXEN; local_irq_restore(flags); @@ -246,10 +246,10 @@ static void rs_start(struct tty_struct *tty) struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; m68328_uart *uart = &uart_addr[info->line]; unsigned long flags; - + if (serial_paranoia_check(info, tty->name, "rs_start")) return; - + local_irq_save(flags); if (info->xmit_cnt && info->xmit_buf && !(uart->ustcnt & USTCNT_TXEN)) { #ifdef USE_INTS @@ -271,9 +271,9 @@ static void receive_chars(struct m68k_serial *info, unsigned short rx) */ #ifndef CONFIG_XCOPILOT_BUGS do { -#endif +#endif ch = GET_FIELD(rx, URX_RXDATA); - + if (info->is_cons) { if (URX_BREAK & rx) { /* whee, break received */ return; @@ -374,7 +374,7 @@ static int startup(struct m68k_serial *info, struct tty_struct *tty) { m68328_uart *uart = &uart_addr[info->line]; unsigned long flags; - + if (info->tport.flags & ASYNC_INITIALIZED) return 0; @@ -399,7 +399,7 @@ static int startup(struct m68k_serial *info, struct tty_struct *tty) * Finally, enable sequencing and interrupts */ #ifdef USE_INTS - uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | + uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_RX_INTR_MASK | USTCNT_TX_INTR_MASK; #else uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_RX_INTR_MASK; @@ -434,7 +434,7 @@ static void shutdown(struct m68k_serial *info, struct tty_struct *tty) return; local_irq_save(flags); - + if (info->xmit_buf) { free_page((unsigned long) info->xmit_buf); info->xmit_buf = 0; @@ -442,7 +442,7 @@ static void shutdown(struct m68k_serial *info, struct tty_struct *tty) if (tty) set_bit(TTY_IO_ERROR, &tty->flags); - + info->tport.flags &= ~ASYNC_INITIALIZED; local_irq_restore(flags); } @@ -491,7 +491,7 @@ struct { {1, 0x26}, /* 38400 */ {0, 0x26}, /* 57600 */ {1, 0x38}, /* 115200 */ -}; +}; #endif /* rate = 1036800 / ((65 - prescale) * (1<ubaud = PUT_FIELD(UBAUD_DIVIDE, hw_baud_table[i].divisor) | + uart->ubaud = PUT_FIELD(UBAUD_DIVIDE, hw_baud_table[i].divisor) | PUT_FIELD(UBAUD_PRESCALER, hw_baud_table[i].prescale); ustcnt &= ~(USTCNT_PARITYEN | USTCNT_ODD_EVEN | USTCNT_STOP | USTCNT_8_7); - + if ((cflag & CSIZE) == CS8) ustcnt |= USTCNT_8_7; - + if (cflag & CSTOPB) ustcnt |= USTCNT_STOP; @@ -535,7 +535,7 @@ static void change_speed(struct m68k_serial *info, struct tty_struct *tty) ustcnt |= USTCNT_PARITYEN; if (cflag & PARODD) ustcnt |= USTCNT_ODD_EVEN; - + #ifdef CONFIG_SERIAL_68328_RTS_CTS if (cflag & CRTSCTS) { uart->utx.w &= ~UTX_NOCTS; @@ -545,7 +545,7 @@ static void change_speed(struct m68k_serial *info, struct tty_struct *tty) #endif ustcnt |= USTCNT_TXEN; - + uart->ustcnt = ustcnt; return; } @@ -590,7 +590,7 @@ static void rs_fair_output(void) void console_print_68328(const char *p) { char c; - + while ((c = *(p++)) != 0) { if (c == '\n') rs_put_char('\r'); @@ -611,7 +611,7 @@ static void rs_set_ldisc(struct tty_struct *tty) return; info->is_cons = (tty->termios.c_line == N_TTY); - + printk("ttyS%d console mode %s\n", info->line, info->is_cons ? "on" : "off"); } @@ -677,7 +677,7 @@ static int rs_write(struct tty_struct *tty, local_save_flags(flags); while (1) { - local_irq_disable(); + local_irq_disable(); c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, SERIAL_XMIT_SIZE - info->xmit_head)); local_irq_restore(flags); @@ -698,7 +698,7 @@ static int rs_write(struct tty_struct *tty, if (info->xmit_cnt && !tty->stopped) { /* Enable transmitter */ - local_irq_disable(); + local_irq_disable(); #ifndef USE_INTS while (info->xmit_cnt) { #endif @@ -728,7 +728,7 @@ static int rs_write_room(struct tty_struct *tty) { struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; int ret; - + if (serial_paranoia_check(info, tty->name, "rs_write_room")) return 0; ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; @@ -740,7 +740,7 @@ static int rs_write_room(struct tty_struct *tty) static int rs_chars_in_buffer(struct tty_struct *tty) { struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; - + if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer")) return 0; return info->xmit_cnt; @@ -750,7 +750,7 @@ static void rs_flush_buffer(struct tty_struct *tty) { struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; unsigned long flags; - + if (serial_paranoia_check(info, tty->name, "rs_flush_buffer")) return; local_irq_save(flags); @@ -773,7 +773,7 @@ static void rs_throttle(struct tty_struct *tty) if (serial_paranoia_check(info, tty->name, "rs_throttle")) return; - + if (I_IXOFF(tty)) info->x_char = STOP_CHAR(tty); @@ -786,7 +786,7 @@ static void rs_unthrottle(struct tty_struct *tty) if (serial_paranoia_check(info, tty->name, "rs_unthrottle")) return; - + if (I_IXOFF(tty)) { if (info->x_char) info->x_char = 0; @@ -807,7 +807,7 @@ static int get_serial_info(struct m68k_serial *info, struct serial_struct *retinfo) { struct serial_struct tmp; - + if (!retinfo) return -EFAULT; memset(&tmp, 0, sizeof(tmp)); @@ -832,7 +832,7 @@ static int set_serial_info(struct m68k_serial *info, struct tty_struct *tty, struct tty_port *port = &info->tport; struct serial_struct new_serial; struct m68k_serial old_info; - int retval = 0; + int retval = 0; if (!new_info) return -EFAULT; @@ -911,11 +911,11 @@ static void send_break(struct m68k_serial *info, unsigned int duration) if (!info->port) return; local_irq_save(flags); -#ifdef USE_INTS +#ifdef USE_INTS uart->utx.w |= UTX_SEND_BREAK; msleep_interruptible(duration); uart->utx.w &= ~UTX_SEND_BREAK; -#endif +#endif local_irq_restore(flags); } @@ -934,7 +934,7 @@ static int rs_ioctl(struct tty_struct *tty, if (tty->flags & (1 << TTY_IO_ERROR)) return -EIO; } - + switch (cmd) { case TCSBRK: /* SVID version: non-zero arg --> no break */ retval = tty_check_change(tty); @@ -979,7 +979,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) if ((old_termios->c_cflag & CRTSCTS) && !(tty->termios.c_cflag & CRTSCTS)) rs_start(tty); - + } /* @@ -1001,14 +1001,14 @@ static void rs_close(struct tty_struct *tty, struct file *filp) if (serial_paranoia_check(info, tty->name, "rs_close")) return; - + local_irq_save(flags); - + if (tty_hung_up_p(filp)) { local_irq_restore(flags); return; } - + if ((tty->count == 1) && (port->count != 1)) { /* * Uh, oh. tty->count is 1, which means that the tty @@ -1050,11 +1050,11 @@ static void rs_close(struct tty_struct *tty, struct file *filp) shutdown(info, tty); rs_flush_buffer(tty); - + tty_ldisc_flush(tty); tty->closing = 0; tty_port_tty_set(&info->tport, NULL); -#warning "This is not and has never been valid so fix it" +#warning "This is not and has never been valid so fix it" #if 0 if (tty->ldisc.num != ldiscs[N_TTY].num) { if (tty->ldisc.close) @@ -1064,7 +1064,7 @@ static void rs_close(struct tty_struct *tty, struct file *filp) if (tty->ldisc.open) (tty->ldisc.open)(tty); } -#endif +#endif if (port->blocked_open) { if (port->close_delay) msleep_interruptible(jiffies_to_msecs(port->close_delay)); @@ -1080,10 +1080,10 @@ static void rs_close(struct tty_struct *tty, struct file *filp) void rs_hangup(struct tty_struct *tty) { struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; - + if (serial_paranoia_check(info, tty->name, "rs_hangup")) return; - + rs_flush_buffer(tty); shutdown(info, tty); info->tport.count = 0; @@ -1166,14 +1166,14 @@ rs68328_init(void) /* Initialize the tty_driver structure */ /* SPARC: Not all of this is exactly right for us. */ - + serial_driver->name = "ttyS"; serial_driver->major = TTY_MAJOR; serial_driver->minor_start = 64; serial_driver->type = TTY_DRIVER_TYPE_SERIAL; serial_driver->subtype = SERIAL_TYPE_NORMAL; serial_driver->init_termios = tty_std_termios; - serial_driver->init_termios.c_cflag = + serial_driver->init_termios.c_cflag = m68328_console_cbaud | CS8 | CREAD | HUPCL | CLOCAL; serial_driver->flags = TTY_DRIVER_REAL_RAW; tty_set_operations(serial_driver, &rs_ops); @@ -1192,11 +1192,11 @@ rs68328_init(void) info->x_char = 0; info->line = i; info->is_cons = 1; /* Means shortcuts work */ - - printk("%s%d at 0x%08x (irq = %d)", serial_driver->name, info->line, + + printk("%s%d at 0x%08x (irq = %d)", serial_driver->name, info->line, info->port, info->irq); printk(" is a builtin MC68328 UART\n"); - + #ifdef CONFIG_M68VZ328 if (i > 0) PJSEL &= 0xCF; /* PSW enable second port output */ @@ -1244,7 +1244,7 @@ again: goto again; } - UBAUD = PUT_FIELD(UBAUD_DIVIDE, hw_baud_table[i].divisor) | + UBAUD = PUT_FIELD(UBAUD_DIVIDE, hw_baud_table[i].divisor) | PUT_FIELD(UBAUD_PRESCALER, hw_baud_table[i].prescale); ustcnt &= ~(USTCNT_PARITYEN | USTCNT_ODD_EVEN | USTCNT_STOP | USTCNT_8_7); ustcnt |= USTCNT_8_7; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/