Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754673AbbLPN1N (ORCPT ); Wed, 16 Dec 2015 08:27:13 -0500 Received: from mezzanine.sirena.org.uk ([106.187.55.193]:36607 "EHLO mezzanine.sirena.org.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754613AbbLPN1K (ORCPT ); Wed, 16 Dec 2015 08:27:10 -0500 From: Mark Brown To: Andy Gross , Bjorn Andersson , Mark Brown Cc: linux-kernel@vger.kernel.org In-Reply-To: <1450157445-23723-4-git-send-email-andy.gross@linaro.org> Message-Id: Date: Wed, 16 Dec 2015 13:26:57 +0000 X-SA-Exim-Connect-IP: 94.175.94.161 X-SA-Exim-Mail-From: broonie@sirena.org.uk Subject: Applied "regulator: qcom-smd: Add support for PMA8084" to the regulator tree X-SA-Exim-Version: 4.2.1 (built Mon, 26 Dec 2011 16:24:06 +0000) X-SA-Exim-Scanned: Yes (on mezzanine.sirena.org.uk) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 9146 Lines: 228 The patch regulator: qcom-smd: Add support for PMA8084 has been applied to the regulator tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From ee01d0c91ef1c198fd7819c2eb166580e41dc2ea Mon Sep 17 00:00:00 2001 From: Andy Gross Date: Mon, 14 Dec 2015 23:30:45 -0600 Subject: [PATCH] regulator: qcom-smd: Add support for PMA8084 This patch adds support and documentation for the PMA8084 regulators found on APQ8084 platforms. Signed-off-by: Andy Gross Acked-by: Bjorn Andersson Signed-off-by: Mark Brown --- .../bindings/regulator/qcom,smd-rpm-regulator.txt | 35 ++++++++ drivers/regulator/qcom_smd-regulator.c | 95 ++++++++++++++++++++++ 2 files changed, 130 insertions(+) diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt index 82557e174258..1f8d6f84b657 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt @@ -22,6 +22,7 @@ Regulator nodes are identified by their compatible: "qcom,rpm-pm8841-regulators" "qcom,rpm-pm8916-regulators" "qcom,rpm-pm8941-regulators" + "qcom,rpm-pma8084-regulators" - vdd_s1-supply: - vdd_s2-supply: @@ -67,6 +68,35 @@ Regulator nodes are identified by their compatible: Definition: reference to regulator supplying the input pin, as described in the data sheet +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_s4-supply: +- vdd_s5-supply: +- vdd_s6-supply: +- vdd_s7-supply: +- vdd_s8-supply: +- vdd_s9-supply: +- vdd_s10-supply: +- vdd_s11-supply: +- vdd_s12-supply: +- vdd_l1_l11-supply: +- vdd_l2_l3_l4_l27-supply: +- vdd_l5_l7-supply: +- vdd_l6_l12_l14_l15_l26-supply: +- vdd_l8-supply: +- vdd_l9_l10_l13_l20_l23_l24-supply: +- vdd_l16_l25-supply: +- vdd_l17-supply: +- vdd_l18-supply: +- vdd_l19-supply: +- vdd_l21-supply: +- vdd_l22-supply: + Usage: optional (pma8084 only) + Value type: + Definition: reference to regulator supplying the input pin, as + described in the data sheet + The regulator node houses sub-nodes for each regulator within the device. Each sub-node is identified using the node's name, with valid values listed for each of the pmics below. @@ -83,6 +113,11 @@ pm8941: l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, lvs3, 5vs1, 5vs2 +pma8084: + s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5, + l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, + l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1 + The content of each sub-node is defined by the standard binding for regulators - see regulator.txt. diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c index 8464eadf2c85..56a17ec5b5ef 100644 --- a/drivers/regulator/qcom_smd-regulator.c +++ b/drivers/regulator/qcom_smd-regulator.c @@ -153,6 +153,49 @@ static const struct regulator_ops rpm_switch_ops = { .is_enabled = rpm_reg_is_enabled, }; +static const struct regulator_desc pma8084_hfsmps = { + .linear_ranges = (struct regulator_linear_range[]) { + REGULATOR_LINEAR_RANGE(375000, 0, 95, 12500), + REGULATOR_LINEAR_RANGE(1550000, 96, 158, 25000), + }, + .n_linear_ranges = 2, + .n_voltages = 159, + .ops = &rpm_smps_ldo_ops, +}; + +static const struct regulator_desc pma8084_ftsmps = { + .linear_ranges = (struct regulator_linear_range[]) { + REGULATOR_LINEAR_RANGE(350000, 0, 184, 5000), + REGULATOR_LINEAR_RANGE(700000, 185, 339, 10000), + }, + .n_linear_ranges = 2, + .n_voltages = 340, + .ops = &rpm_smps_ldo_ops, +}; + +static const struct regulator_desc pma8084_pldo = { + .linear_ranges = (struct regulator_linear_range[]) { + REGULATOR_LINEAR_RANGE(750000, 0, 30, 25000), + REGULATOR_LINEAR_RANGE(1500000, 31, 99, 50000), + }, + .n_linear_ranges = 2, + .n_voltages = 100, + .ops = &rpm_smps_ldo_ops, +}; + +static const struct regulator_desc pma8084_nldo = { + .linear_ranges = (struct regulator_linear_range[]) { + REGULATOR_LINEAR_RANGE(750000, 0, 63, 12500), + }, + .n_linear_ranges = 1, + .n_voltages = 64, + .ops = &rpm_smps_ldo_ops, +}; + +static const struct regulator_desc pma8084_switch = { + .ops = &rpm_switch_ops, +}; + static const struct regulator_desc pm8x41_hfsmps = { .linear_ranges = (struct regulator_linear_range[]) { REGULATOR_LINEAR_RANGE( 375000, 0, 95, 12500), @@ -335,10 +378,62 @@ static const struct rpm_regulator_data rpm_pm8941_regulators[] = { {} }; +static const struct rpm_regulator_data rpm_pma8084_regulators[] = { + { "s1", QCOM_SMD_RPM_SMPA, 1, &pma8084_ftsmps, "vdd_s1" }, + { "s2", QCOM_SMD_RPM_SMPA, 2, &pma8084_ftsmps, "vdd_s2" }, + { "s3", QCOM_SMD_RPM_SMPA, 3, &pma8084_hfsmps, "vdd_s3" }, + { "s4", QCOM_SMD_RPM_SMPA, 4, &pma8084_hfsmps, "vdd_s4" }, + { "s5", QCOM_SMD_RPM_SMPA, 5, &pma8084_hfsmps, "vdd_s5" }, + { "s6", QCOM_SMD_RPM_SMPA, 6, &pma8084_ftsmps, "vdd_s6" }, + { "s7", QCOM_SMD_RPM_SMPA, 7, &pma8084_ftsmps, "vdd_s7" }, + { "s8", QCOM_SMD_RPM_SMPA, 8, &pma8084_ftsmps, "vdd_s8" }, + { "s9", QCOM_SMD_RPM_SMPA, 9, &pma8084_ftsmps, "vdd_s9" }, + { "s10", QCOM_SMD_RPM_SMPA, 10, &pma8084_ftsmps, "vdd_s10" }, + { "s11", QCOM_SMD_RPM_SMPA, 11, &pma8084_ftsmps, "vdd_s11" }, + { "s12", QCOM_SMD_RPM_SMPA, 12, &pma8084_ftsmps, "vdd_s12" }, + + { "l1", QCOM_SMD_RPM_LDOA, 1, &pma8084_nldo, "vdd_l1_l11" }, + { "l2", QCOM_SMD_RPM_LDOA, 2, &pma8084_nldo, "vdd_l2_l3_l4_l27" }, + { "l3", QCOM_SMD_RPM_LDOA, 3, &pma8084_nldo, "vdd_l2_l3_l4_l27" }, + { "l4", QCOM_SMD_RPM_LDOA, 4, &pma8084_nldo, "vdd_l2_l3_l4_l27" }, + { "l5", QCOM_SMD_RPM_LDOA, 5, &pma8084_pldo, "vdd_l5_l7" }, + { "l6", QCOM_SMD_RPM_LDOA, 6, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" }, + { "l7", QCOM_SMD_RPM_LDOA, 7, &pma8084_pldo, "vdd_l5_l7" }, + { "l8", QCOM_SMD_RPM_LDOA, 8, &pma8084_pldo, "vdd_l8" }, + { "l9", QCOM_SMD_RPM_LDOA, 9, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" }, + { "l10", QCOM_SMD_RPM_LDOA, 10, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" }, + { "l11", QCOM_SMD_RPM_LDOA, 11, &pma8084_nldo, "vdd_l1_l11" }, + { "l12", QCOM_SMD_RPM_LDOA, 12, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" }, + { "l13", QCOM_SMD_RPM_LDOA, 13, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" }, + { "l14", QCOM_SMD_RPM_LDOA, 14, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" }, + { "l15", QCOM_SMD_RPM_LDOA, 15, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" }, + { "l16", QCOM_SMD_RPM_LDOA, 16, &pma8084_pldo, "vdd_l16_l25" }, + { "l17", QCOM_SMD_RPM_LDOA, 17, &pma8084_pldo, "vdd_l17" }, + { "l18", QCOM_SMD_RPM_LDOA, 18, &pma8084_pldo, "vdd_l18" }, + { "l19", QCOM_SMD_RPM_LDOA, 19, &pma8084_pldo, "vdd_l19" }, + { "l20", QCOM_SMD_RPM_LDOA, 20, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" }, + { "l21", QCOM_SMD_RPM_LDOA, 21, &pma8084_pldo, "vdd_l21" }, + { "l22", QCOM_SMD_RPM_LDOA, 22, &pma8084_pldo, "vdd_l22" }, + { "l23", QCOM_SMD_RPM_LDOA, 23, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" }, + { "l24", QCOM_SMD_RPM_LDOA, 24, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" }, + { "l25", QCOM_SMD_RPM_LDOA, 25, &pma8084_pldo, "vdd_l16_l25" }, + { "l26", QCOM_SMD_RPM_LDOA, 26, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" }, + { "l27", QCOM_SMD_RPM_LDOA, 27, &pma8084_nldo, "vdd_l2_l3_l4_l27" }, + + { "lvs1", QCOM_SMD_RPM_VSA, 1, &pma8084_switch }, + { "lvs2", QCOM_SMD_RPM_VSA, 2, &pma8084_switch }, + { "lvs3", QCOM_SMD_RPM_VSA, 3, &pma8084_switch }, + { "lvs4", QCOM_SMD_RPM_VSA, 4, &pma8084_switch }, + { "5vs1", QCOM_SMD_RPM_VSA, 5, &pma8084_switch }, + + {} +}; + static const struct of_device_id rpm_of_match[] = { { .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators }, { .compatible = "qcom,rpm-pm8916-regulators", .data = &rpm_pm8916_regulators }, { .compatible = "qcom,rpm-pm8941-regulators", .data = &rpm_pm8941_regulators }, + { .compatible = "qcom,rpm-pma8084-regulators", .data = &rpm_pma8084_regulators }, {} }; MODULE_DEVICE_TABLE(of, rpm_of_match); -- 2.6.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/