Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S966004AbbLPRAe (ORCPT ); Wed, 16 Dec 2015 12:00:34 -0500 Received: from mail-pf0-f181.google.com ([209.85.192.181]:33928 "EHLO mail-pf0-f181.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S934222AbbLPRAa (ORCPT ); Wed, 16 Dec 2015 12:00:30 -0500 Subject: Re: [PATCH 10/11] tty: serial: 8250: Replace printk by pr_* To: Anton Wuerfel References: <1450280177-4460-1-git-send-email-anton.wuerfel@fau.de> <1450280177-4460-11-git-send-email-anton.wuerfel@fau.de> Cc: linux-serial@vger.kernel.org, Greg Kroah-Hartman , Jiri Slaby , "James E.J. Bottomley" , Helge Deller , Heikki Krogerus , Andy Shevchenko , Qipeng Zha , Desmond Liu , Wang Long , Matt Redfearn , Paul Burton , Ralf Baechle , Krzysztof Kozlowski , Peter Hung , Soeren Grunewald , Adam Lee , "Maciej S. Szmigiero" , Mans Rullgard , linux-kernel@vger.kernel.org, linux-parisc@vger.kernel.org, linux-kernel@i4.cs.fau.de, Phillip Raffeck From: Peter Hurley Message-ID: <567198AA.2030503@hurleysoftware.com> Date: Wed, 16 Dec 2015 09:00:26 -0800 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101 Thunderbird/38.4.0 MIME-Version: 1.0 In-Reply-To: <1450280177-4460-11-git-send-email-anton.wuerfel@fau.de> Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 6827 Lines: 176 Hi Anton, On 12/16/2015 07:36 AM, Anton Wuerfel wrote: > This patch replaces printk by the corresponding variant of pr_* in order to > fix checkpatch warnings. Comments below. > Signed-off-by: Anton Würfel > Signed-off-by: Phillip Raffeck > CC: linux-kernel@i4.cs.fau.de > --- > drivers/tty/serial/8250/8250_core.c | 5 ++--- > drivers/tty/serial/8250/8250_gsc.c | 6 ++---- > drivers/tty/serial/8250/8250_hp300.c | 14 +++++++------- > drivers/tty/serial/8250/8250_pnp.c | 6 +++--- > drivers/tty/serial/8250/8250_port.c | 3 +-- > 5 files changed, 15 insertions(+), 19 deletions(-) > > diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c > index 2b3731f..b5e0c48 100644 > --- a/drivers/tty/serial/8250/8250_core.c > +++ b/drivers/tty/serial/8250/8250_core.c > @@ -1095,9 +1095,8 @@ static int __init serial8250_init(void) > > serial8250_isa_init_ports(); > > - printk(KERN_INFO "Serial: 8250/16550 driver, " > - "%d ports, IRQ sharing %sabled\n", nr_uarts, > - share_irqs ? "en" : "dis"); > + pr_info("Serial: 8250/16550 driver, %d ports, IRQ sharing %sabled\n", > + nr_uarts, share_irqs ? "en" : "dis"); > > #ifdef CONFIG_SPARC > ret = sunserial_register_minors(&serial8250_reg, UART_NR); > diff --git a/drivers/tty/serial/8250/8250_gsc.c b/drivers/tty/serial/8250/8250_gsc.c > index 2e3ea1a..a9b63d0 100644 > --- a/drivers/tty/serial/8250/8250_gsc.c > +++ b/drivers/tty/serial/8250/8250_gsc.c > @@ -42,8 +42,7 @@ static int __init serial_init_chip(struct parisc_device *dev) > * the user what they're missing. > */ > if (parisc_parent(dev)->id.hw_type != HPHW_IOA) > - printk(KERN_INFO > - "Serial: device 0x%llx not configured.\n" > + pr_info("Serial: device 0x%llx not configured.\n" > "Enable support for Wax, Lasi, Asp or Dino.\n", > (unsigned long long)dev->hpa.start); > return -ENODEV; > @@ -66,8 +65,7 @@ static int __init serial_init_chip(struct parisc_device *dev) > > err = serial8250_register_8250_port(&uart); > if (err < 0) { > - printk(KERN_WARNING > - "serial8250_register_8250_port returned error %d\n", err); > + pr_warn("serial8250_register_8250_port returned error %d\n", err); > iounmap(uart.port.membase); > return err; > } > diff --git a/drivers/tty/serial/8250/8250_hp300.c b/drivers/tty/serial/8250/8250_hp300.c > index 52c43da..85b574896 100644 > --- a/drivers/tty/serial/8250/8250_hp300.c > +++ b/drivers/tty/serial/8250/8250_hp300.c > @@ -110,7 +110,7 @@ int __init hp300_setup_serial_console(void) > /* Check for APCI console */ > if (scode == 256) { > #ifdef CONFIG_HPAPCI > - printk(KERN_INFO "Serial console is HP APCI 1\n"); > + pr_info("Serial console is HP APCI 1\n"); > > port.uartclk = HPAPCI_BAUD_BASE * 16; > port.mapbase = (FRODO_BASE + FRODO_APCI_OFFSET(1)); > @@ -118,7 +118,7 @@ int __init hp300_setup_serial_console(void) > port.regshift = 2; > add_preferred_console("ttyS", port.line, "9600n8"); > #else > - printk(KERN_WARNING "Serial console is APCI but support is disabled (CONFIG_HPAPCI)!\n"); > + pr_warn("Serial console is APCI but support is disabled (CONFIG_HPAPCI)!\n"); > return 0; > #endif > } else { > @@ -128,7 +128,7 @@ int __init hp300_setup_serial_console(void) > if (!pa) > return 0; > > - printk(KERN_INFO "Serial console is HP DCA at select code %d\n", scode); > + pr_info("Serial console is HP DCA at select code %d\n", scode); > > port.uartclk = HPDCA_BAUD_BASE * 16; > port.mapbase = (pa + UART_OFFSET); > @@ -142,13 +142,13 @@ int __init hp300_setup_serial_console(void) > if (DIO_ID(pa + DIO_VIRADDRBASE) & 0x80) > add_preferred_console("ttyS", port.line, "9600n8"); > #else > - printk(KERN_WARNING "Serial console is DCA but support is disabled (CONFIG_HPDCA)!\n"); > + pr_warn("Serial console is DCA but support is disabled (CONFIG_HPDCA)!\n"); > return 0; > #endif > } > > if (early_serial_setup(&port) < 0) > - printk(KERN_WARNING "hp300_setup_serial_console(): early_serial_setup() failed.\n"); > + pr_warn("hp300_setup_serial_console(): early_serial_setup() failed.\n"); > return 0; > } > #endif /* CONFIG_SERIAL_8250_CONSOLE */ > @@ -180,7 +180,7 @@ static int hpdca_init_one(struct dio_dev *d, > line = serial8250_register_8250_port(&uart); > > if (line < 0) { > - printk(KERN_NOTICE "8250_hp300: register_serial() DCA scode %d" > + pr_notice("8250_hp300: register_serial() DCA scode %d" > " irq %d failed\n", d->scode, uart.port.irq); > return -ENOMEM; > } > @@ -261,7 +261,7 @@ static int __init hp300_8250_init(void) > line = serial8250_register_8250_port(&uart); > > if (line < 0) { > - printk(KERN_NOTICE "8250_hp300: register_serial() APCI" > + pr_notice("8250_hp300: register_serial() APCI" > " %d irq %d failed\n", i, uart.port.irq); Missed these multi-line strings in your previous patch "tty: serial: 8250: Fix multi-line strings" > kfree(port); > continue; > diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c > index 2731031..3811c67 100644 > --- a/drivers/tty/serial/8250/8250_pnp.c > +++ b/drivers/tty/serial/8250/8250_pnp.c > @@ -465,9 +465,9 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) > return -ENODEV; > > #ifdef SERIAL_DEBUG_PNP > - printk(KERN_DEBUG > - "Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n", > - uart.port.iobase, uart.port.mapbase, uart.port.irq, uart.port.iotype); > + pr_debug("Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n", > + uart.port.iobase, uart.port.mapbase, > + uart.port.irq, uart.port.iotype); Note that printk(KERN_DEBUG) and pr_debug() have different behavior; you should note what the behavioral difference is in the changelog. > #endif > if (flags & CIR_PORT) { > uart.port.flags |= UPF_FIXED_PORT | UPF_FIXED_TYPE; > diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c > index 0ec823e..1b2aaf9 100644 > --- a/drivers/tty/serial/8250/8250_port.c > +++ b/drivers/tty/serial/8250/8250_port.c > @@ -1222,8 +1222,7 @@ static void autoconfig(struct uart_8250_port *up) > out_lock: > spin_unlock_irqrestore(&port->lock, flags); > if (up->capabilities != old_capabilities) { > - printk(KERN_WARNING > - "ttyS%d: detected caps %08x should be %08x\n", > + pr_warn("ttyS%d: detected caps %08x should be %08x\n", > serial_index(port), old_capabilities, > up->capabilities); > } > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/