Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751885AbbLQR2S (ORCPT ); Thu, 17 Dec 2015 12:28:18 -0500 Received: from mx1.redhat.com ([209.132.183.28]:54096 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751641AbbLQR2P (ORCPT ); Thu, 17 Dec 2015 12:28:15 -0500 Date: Thu, 17 Dec 2015 18:28:09 +0100 From: Benjamin Tissoires To: Nish Aravamudan Cc: Jiri Kosina , Mika Westerberg , Andrew Duggan , Gabriele Mazzotta , Seth Forshee , Dan Carpenter , linux-input@vger.kernel.org, "linux-kernel@vger.kernel.org" Subject: Re: [RESEND] Lenovo Yoga 900 touchpad issues Message-ID: <20151217172809.GM16026@mail.corp.redhat.com> References: <20151216092858.GP1762@lahna.fi.intel.com> <20151217095329.GJ16026@mail.corp.redhat.com> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline In-Reply-To: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5170 Lines: 125 On Dec 17 2015 or thereabouts, Nish Aravamudan wrote: > Hi Benjamin, > > On Thu, Dec 17, 2015 at 1:53 AM, Benjamin Tissoires > wrote: > > On Dec 16 2015 or thereabouts, Nish Aravamudan wrote: > >> Hi Jiri, > >> > >> On Wed, Dec 16, 2015 at 5:18 AM, Jiri Kosina wrote: > >> > On Wed, 16 Dec 2015, Mika Westerberg wrote: > >> > > >> >> > [Apologies for the resend, didn't realize I hadn't changed my GMail settings > >> >> > to not use HTML.] > >> >> > > >> >> > I have recently purchased a Lenovo Yoga 900 and most everything is working > >> >> > with a slightly modified 4.4-rc5 (https://lkml.org/lkml/2015/11/30/441 applied > >> >> > to enable the touchpad itself), I am seeing two issues: > >> >> > > >> >> > 1) On suspend/resume, the touchpad is non-functional. A `modprobe -r i2c-hid; > >> >> > modprobe i2c-hid` "fixes" it. > >> >> > > >> >> > The kernel emits: > >> >> > > >> >> > i2c_hid i2c-SYNA2B29:00: failed to reset device. > >> >> > dpm_run_callback(): i2c_hid_resume+0x0/0xc0 [i2c_hid] returns -61 > >> >> > PM: Device i2c-SYNA2B29:00 failed to resume: error -61 > >> >> > > >> >> > During the resume. So perhaps this is a timing issue (given that once > >> >> > resumed, the > >> >> > module reload does work?). > >> >> > >> >> Linus noticed this as well and Jiri suggested the below patch which > >> >> seemed to fix the issue (although it increased resume time a bit). > >> >> > >> >> I was supposed to get one Lenovo Yoga 900 here to debug this issue but > >> >> I'm still waiting for it (sloow big corporation bureaucracy takes some > >> >> time to get things purchased outside). > >> >> > >> >> diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c > >> >> index 55d8f9d..52dd03a0 100644 > >> >> --- a/drivers/hid/i2c-hid/i2c-hid.c > >> >> +++ b/drivers/hid/i2c-hid/i2c-hid.c > >> >> @@ -1121,10 +1121,16 @@ static int i2c_hid_resume(struct device *dev) > >> >> struct i2c_client *client = to_i2c_client(dev); > >> >> struct i2c_hid *ihid = i2c_get_clientdata(client); > >> >> struct hid_device *hid = ihid->hid; > >> >> - int wake_status; > >> >> + int wake_status, tries = 3; > >> >> > >> >> enable_irq(ihid->irq); > >> >> - ret = i2c_hid_hwreset(client); > >> >> + > >> >> + do { > >> >> + ret = i2c_hid_hwreset(client); > >> >> + if (ret) > >> >> + msleep(1000); > >> >> + } while (tries-- > 0 && ret); > >> >> + > >> >> if (ret) > >> >> return ret; > >> > > >> > As a possible alternative, please test the patch above on top of for-next > >> > branch of > >> > > >> > git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git > >> > > >> > It contains 64bebefcf3 ("HID: enable hid device to suspend/resume > >> > asynchronously") and knowing whether that changes something might be > >> > interesting datapoint as well. > >> > >> What should I be looking for to be different wrt. that tree? Should I > >> not see the failure to reset the device? Or would it be (relatively) > >> speedier than the stock kernel? > >> > > > > Basically, does the resume time gets better? Linus experienced something > > like 9 secs of resume before this patch, and now I hope it should be > > saner (the touchpad might still be a little bit long to respond). > > > > Also, we have a bug report concerning this laptop and it looks like the > > i2c controller needs to be updated (see > > https://bugzilla.redhat.com/show_bug.cgi?id=1275718). > > > > I am not entirely sure why those on the rhbz needs to update the i2c > > controller while you don't have to, but it may also be worth checking if > > the i2c patch series mentioned in this rhbz (comment #20) fixes by itself > > the resume issue (without Jiri's patch). > > Yep, I applied the series from https://lkml.org/lkml/2015/11/30/441 > already. Without that series, I don't have a working touchscreen and > touchpad. Touchpad resume doesn't work with just that series. Oh, OK then. Now I start understanding the whole thing. > > With that series + Jiri's patch it seems to resume pretty quickly. But > I guess I don't see exactly what would change with the resume if the > same loop is present on top of hid:for-next? Still on my list to test, > though. The difference is that now, if the touchpad takes 5 seconds to resume, it should not block the whole resume time given that it is run in its own thread. > > Also, even with that series, there does appear maybe there is an I2C > issue, though: > > i2c_hid i2c-ITE8396:00: error in i2c_hid_init_report size:19 / ret_size:18 I wouldn't worry too much about that. The device does not correctly answer, but most of the time, this is harmless. > > as I mentioned in my first e-mail; which might be affecting the IIO sensors? If iio-sensor-proxy works under gnome, there is no need to panic :) Cheers, Benjamin -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/