Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965075AbbLRTre (ORCPT ); Fri, 18 Dec 2015 14:47:34 -0500 Received: from mail.savoirfairelinux.com ([208.88.110.44]:36522 "EHLO mail.savoirfairelinux.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933011AbbLRTrc (ORCPT ); Fri, 18 Dec 2015 14:47:32 -0500 From: Damien Riegel To: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org Cc: Thomas Gleixner , Jason Cooper , Marc Zyngier , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , kernel@savoirfairelinux.com, Damien Riegel Subject: [PATCH 1/2] irqchip: add documentation for TS-4800 interrupt controller Date: Fri, 18 Dec 2015 14:39:18 -0500 Message-Id: <1450467559-21066-1-git-send-email-damien.riegel@savoirfairelinux.com> X-Mailer: git-send-email 2.5.0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1814 Lines: 41 This is an interrupt-controller implemented in an FPGA, to multiplex interrupts generated from other IPs. The FPGA usually uses a GPIO as a parent interrupt controller to notify that one of the multiplexed interrupts has triggered. Signed-off-by: Damien Riegel --- .../bindings/interrupt-controller/technologic,ts4800.txt | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800.txt diff --git a/Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800.txt b/Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800.txt new file mode 100644 index 0000000..7f15f1b --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800.txt @@ -0,0 +1,16 @@ +TS-4800 FPGA interrupt controller + +TS-4800 FPGA has an internal interrupt controller. When one of the +interrupts is triggered, the SoC is notified, usually using a GPIO as +parent interrupt source. + +Required properties: +- compatible: should be "technologic,ts4800-irqc" +- interrupt-controller: identifies the node as an interrupt controller +- reg: physical base address of the controller and length of memory mapped + region +- #interrupt-cells: specifies the number of cells needed to encode an interrupt + source, should be 1. +- interrupt-parent: phandle to the parent interrupt controller this one is + cascaded from +- interrupts: specifies the interrupt line in the interrupt-parent controller -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/