Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965567AbbLRVG3 (ORCPT ); Fri, 18 Dec 2015 16:06:29 -0500 Received: from mail-io0-f172.google.com ([209.85.223.172]:36691 "EHLO mail-io0-f172.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S965349AbbLRU75 (ORCPT ); Fri, 18 Dec 2015 15:59:57 -0500 From: Mathieu Poirier To: gregkh@linuxfoundation.org, alexander.shishkin@linux.intel.com Cc: zhang.chunyan@linaro.org, mike.leach@arm.com, tor@ti.com, al.grant@arm.com, fainelli@broadcom.com, linux-arm-kernel@lists.infradead.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, Mathieu Poirier Subject: [PATCH V7 11/24] coresight: etm3x: changing default trace configuration Date: Fri, 18 Dec 2015 13:59:07 -0700 Message-Id: <1450472361-426-12-git-send-email-mathieu.poirier@linaro.org> X-Mailer: git-send-email 2.1.4 In-Reply-To: <1450472361-426-1-git-send-email-mathieu.poirier@linaro.org> References: <1450472361-426-1-git-send-email-mathieu.poirier@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3064 Lines: 82 Changing default configuration to include the entire address range rather than just the kernel. That way traces are more inclusive and it is easier to narrow down if needed. Signed-off-by: Mathieu Poirier --- drivers/hwtracing/coresight/coresight-etm.h | 2 ++ drivers/hwtracing/coresight/coresight-etm3x.c | 29 ++++++++++++--------------- 2 files changed, 15 insertions(+), 16 deletions(-) diff --git a/drivers/hwtracing/coresight/coresight-etm.h b/drivers/hwtracing/coresight/coresight-etm.h index 5b29d5540fe5..44585d4adb26 100644 --- a/drivers/hwtracing/coresight/coresight-etm.h +++ b/drivers/hwtracing/coresight/coresight-etm.h @@ -146,6 +146,7 @@ * @startstop_ctrl: setting for register ETMTSSCR. * @enable_event: setting for register ETMTEEVR. * @enable_ctrl1: setting for register ETMTECR1. + * @enable_ctrl2: setting for register ETMTECR2. * @fifofull_level: setting for register ETMFFLR. * @addr_idx: index for the address comparator selection. * @addr_val: value for address comparator register. @@ -179,6 +180,7 @@ struct etm_config { u32 startstop_ctrl; u32 enable_event; u32 enable_ctrl1; + u32 enable_ctrl2; u32 fifofull_level; u8 addr_idx; u32 addr_val[ETM_MAX_ADDR_CMP]; diff --git a/drivers/hwtracing/coresight/coresight-etm3x.c b/drivers/hwtracing/coresight/coresight-etm3x.c index 221629ff8916..c97232ab7564 100644 --- a/drivers/hwtracing/coresight/coresight-etm3x.c +++ b/drivers/hwtracing/coresight/coresight-etm3x.c @@ -581,26 +581,23 @@ static void etm_init_arch_data(void *info) static void etm_init_default_data(struct etm_config *config) { - u32 flags = (1 << 0 | /* instruction execute*/ - 3 << 3 | /* ARM instruction */ - 0 << 5 | /* No data value comparison */ - 0 << 7 | /* No exact mach */ - 0 << 8 | /* Ignore context ID */ - 0 << 10); /* Security ignored */ - if (WARN_ON_ONCE(!config)) return; - config->ctrl = (ETMCR_CYC_ACC | ETMCR_TIMESTAMP_EN); - config->enable_ctrl1 = ETMTECR1_ADDR_COMP_1; - config->addr_val[0] = (u32) _stext; - config->addr_val[1] = (u32) _etext; - config->addr_acctype[0] = flags; - config->addr_acctype[1] = flags; - config->addr_type[0] = ETM_ADDR_TYPE_RANGE; - config->addr_type[1] = ETM_ADDR_TYPE_RANGE; - etm_set_default(config); + + /* + * Taken verbatim from the TRM: + * + * To trace all memory: + * set bit [24] in register 0x009, the ETMTECR1, to 1 + * set all other bits in register 0x009, the ETMTECR1, to 0 + * set all bits in register 0x007, the ETMTECR2, to 0 + * set register 0x008, the ETMTEEVR, to 0x6F (TRUE). + */ + config->enable_ctrl1 = BIT(24); + config->enable_ctrl2 = 0x0; + config->enable_event = ETM_HARD_WIRE_RES_A; } static void etm_init_trace_id(struct etm_drvdata *drvdata) -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/