Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755588AbbLWLIN (ORCPT ); Wed, 23 Dec 2015 06:08:13 -0500 Received: from gagarine.paulk.fr ([109.190.93.129]:58239 "EHLO gagarine.paulk.fr" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754497AbbLWLGh (ORCPT ); Wed, 23 Dec 2015 06:06:37 -0500 From: Paul Kocialkowski To: linux-kernel@vger.kernel.org Cc: Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Russell King , =?UTF-8?q?Beno=C3=AEt=20Cousson?= , Tony Lindgren , Liam Girdwood , Mark Brown , Milo Kim , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org, Paul Kocialkowski Subject: [PATCH 5/6] ARM: LG Optimus Black (P970) codename sniper support, with basic features Date: Wed, 23 Dec 2015 11:58:38 +0100 Message-Id: <1450868319-20513-6-git-send-email-contact@paulk.fr> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1450868319-20513-1-git-send-email-contact@paulk.fr> References: <1450868319-20513-1-git-send-email-contact@paulk.fr> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 6173 Lines: 260 The LG Optimus Black (P970) codename sniper is a smartphone that was designed and manufactured by LG Electronics (LGE) and released back in 2011. It is using an OMAP3630 SoC, GP version. This adds devicetree support for the device, with only a few basic features supported, such as debug uart, i2c, internal emmc and external mmc. Signed-off-by: Paul Kocialkowski --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/omap3-sniper.dts | 220 +++++++++++++++++++++++++++++++++++++ 2 files changed, 221 insertions(+) create mode 100644 arch/arm/boot/dts/omap3-sniper.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 30bbc37..2c71106 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -447,6 +447,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ omap3-sbc-t3517.dtb \ omap3-sbc-t3530.dtb \ omap3-sbc-t3730.dtb \ + omap3-sniper.dtb \ omap3-thunder.dtb \ omap3-zoom3.dtb dtb-$(CONFIG_SOC_TI81XX) += \ diff --git a/arch/arm/boot/dts/omap3-sniper.dts b/arch/arm/boot/dts/omap3-sniper.dts new file mode 100644 index 0000000..6c2d99a --- /dev/null +++ b/arch/arm/boot/dts/omap3-sniper.dts @@ -0,0 +1,220 @@ +/* + * Copyright (C) 2015 Paul Kocialkowski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap36xx.dtsi" + +/ { + model = "LG Optimus Black (P970)"; + compatible = "lge,omap3-sniper", "ti,omap36xx", "ti,omap3"; + + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; +}; + +&omap3_pmx_core { + pinctrl-names = "default"; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx */ + 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x18a (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ + 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0x18e (PIN_INPUT | MUX_MODE0) /* i2c2_scl */ + 0x190 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + 0x192 (PIN_INPUT | MUX_MODE0) /* i2c3_scl */ + 0x194 (PIN_INPUT | MUX_MODE0) /* i2c3_sda */ + >; + }; + + lp8720_en_pin: pinmux_lp8720_en_pin { + pinctrl-single,pins = < + 0x80 (PIN_OUTPUT | MUX_MODE4) /* gpio_37 */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x114 (PIN_INPUT | MUX_MODE0) /* sdmmc1_clk */ + 0x116 (PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd */ + 0x118 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0 */ + 0x11a (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1 */ + 0x11c (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2 */ + 0x11e (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + 0x128 (PIN_INPUT | MUX_MODE0) /* sdmmc2_clk */ + 0x12a (PIN_INPUT | MUX_MODE0) /* sdmmc2_cmd */ + 0x12c (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat0 */ + 0x12e (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat1 */ + 0x130 (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat2 */ + 0x132 (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat3 */ + 0x134 (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat4 */ + 0x136 (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat5 */ + 0x138 (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat6 */ + 0x13a (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat7 */ + >; + }; +}; + +&omap3_pmx_wkup { + pinctrl-names = "default"; + + mmc1_cd_pin: pinmux_mmc1_cd_pin { + pinctrl-single,pins = < + 0x1a (PIN_INPUT | MUX_MODE4) /* gpio_10 */ + >; + }; +}; + +&gpio1 { + ti,no-reset-on-init; +}; + +&gpio2 { + ti,no-reset-on-init; +}; + +&gpio3 { + ti,no-reset-on-init; +}; + +&gpio4 { + ti,no-reset-on-init; +}; + +&gpio5 { + ti,no-reset-on-init; +}; + +&gpio6 { + ti,no-reset-on-init; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + + twl_power: power { + compatible = "ti,twl4030-power"; + ti,use_poweroff; + }; + }; +}; + +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + clock-frequency = <400000>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + + clock-frequency = <400000>; + + lp8720@7d { + pinctrl-names = "default"; + pinctrl-0 = <&lp8720_en_pin>; + + compatible = "ti,lp8720"; + reg = <0x7d>; + + ti,enable-gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* gpio_37 */ + + lp8720_ldo1: ldo1 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + }; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins &mmc1_cd_pin>; + vmmc-supply = <&lp8720_ldo1>; + cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* gpio 10 */ + bus-width = <4>; +}; + +&mmc2 { + + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&vmmc2>; + ti,non-removable; + bus-width = <8>; +}; + +&mmc3 { + status = "disabled"; +}; + +/* + * The TWL4030 VAUX2 and VDAC regulators power sensors that are slaves on I2C3. + * When not powered, these sensors cause the I2C3 clock to stay low at all times, + * making it impossible to reach other devices on I2C3. + */ + +&vaux2 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; +}; + +&vdac { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/