Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sun, 9 Mar 2003 12:59:25 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sun, 9 Mar 2003 12:59:25 -0500 Received: from flrtn-2-m1-133.vnnyca.adelphia.net ([24.55.67.133]:28294 "EHLO jyro.mirai.cx") by vger.kernel.org with ESMTP id ; Sun, 9 Mar 2003 12:58:59 -0500 Message-ID: <3E6B835E.2010906@tmsusa.com> Date: Sun, 09 Mar 2003 10:09:34 -0800 From: J Sloan User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.0.2) Gecko/20030208 Netscape/7.02 X-Accept-Language: en-us, en MIME-Version: 1.0 To: linux-kernel Subject: Oops in 2.5.64bk3 Content-Type: multipart/mixed; boundary="------------090407040301000306050105" Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 43463 Lines: 1643 This is a multi-part message in MIME format. --------------090407040301000306050105 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Greetings - A report of an oops from 2.4.64bk3 follows: kernel: 2.5.64bk3 Linux distro: Red Hat 8.0 + updates Hardware: Celeron 1.2 Ghz on genuine Intel Motherboard, 512 MB RAM (lspci output attached) Problem manifestation: We see normal operation from boot until some arbitrary time, usually within 12-24 hours after boot, when an oops occurs, accompanied by cessation of iptables, squid and dns functionality - sometimes can be rebooted with magic sysrq keys, sometimes not. I've attached the entire dmesg output since it's not much longer than the oops and may contain useful information. .config also attached Note this sort of oops has been occurring for the past few 2.5 releases, even when I compile without dri. BTW 2.4.21-pre4-ac is quite solid on this box - OK, going to check out -bk4 and -mm4 next Best Regards, Joe --------------090407040301000306050105 Content-Type: text/plain; name="lspci.out.jyro" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="lspci.out.jyro" 00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 02) 00:02.0 VGA compatible controller: Intel Corp. 82815 CGC [Chipset Graphics Controller] (rev 02) 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 11) 00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 11) 00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 11) 00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 11) 00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 11) 00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 11) 00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev 11) 01:08.0 Ethernet controller: Intel Corp. 82801BA/BAM/CA/CAM Ethernet Controller (rev 03) 01:0c.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 0c) --------------090407040301000306050105 Content-Type: text/plain; name="dmesg.out.2.5.64bk3" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.out.2.5.64bk3" gpe-0416 [06] ev_create_gpe_block : GPE Block: 2 registers at 000000000000042C evgpe-0421 [06] ev_create_gpe_block : GPE Block defined as GPE16 to GPE31 evgpe-0138 [08] ev_save_method_info : GPE number associated with method _L03 is not valid evgpe-0138 [08] ev_save_method_info : GPE number associated with method _L04 is not valid evgpe-0138 [08] ev_save_method_info : GPE number associated with method _L05 is not valid evgpe-0138 [08] ev_save_method_info : GPE number associated with method _L07 is not valid evgpe-0138 [08] ev_save_method_info : GPE number associated with method _L0B is not valid evgpe-0138 [08] ev_save_method_info : GPE number associated with method _L1C is not valid Executing all Device _STA and_INI methods:.......................................... 42 Devices found containing: 42 _STA, 2 _INI methods Completing Region/Field/Buffer/Package initialization:................................................................... Initialized 13/21 Regions 7/7 Fields 37/37 Buffers 10/10 Packages (462 nodes) ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Br ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12, disabled) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12, disabled) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12, disabled) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12) Linux Plug and Play Support v0.95 (c) Adam Belay block request queues: 128 requests per read queue 128 requests per write queue 8 requests per batch enter congestion at 15 exit congestion at 17 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 9 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Enabling SEP on CPU 0 VFS: Disk quotas dquot_6.5.1 Journalled Block Device driver loaded Installing knfsd (copyright (C) 1996 okir@monad.swb.de). udf: registering filesystem Initializing Cryptographic API ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU1] (supports C1) Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A pty: 256 Unix98 ptys configured Real Time Clock Driver v1.11 Linux agpgart interface v0.100 (c) Dave Jones agpgart: agpgart: Detected an Intel i815 Chipset. agpgart: Maximum main memory to use for agp memory: 438M agpgart: AGP aperture is 64M @ 0xf8000000 [drm] Initialized i810 1.2.1 20020211 on minor 0 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH2: IDE controller at PCI slot 00:1f.1 ICH2: chipset revision 17 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio hda: WDC WD400EB-00CPF0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: SONY CD-RW CRX185E1, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: host protected area => 1 hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63, UDMA(100) hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > mice: PS/2 mouse device common for all mice input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 280k freed EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide0(3,3), internal journal Adding 514072k swap on /dev/hda2. Priority:42 extents:1 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide0(3,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide0(3,5), internal journal EXT3-fs: mounted filesystem with writeback data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide0(3,6), internal journal EXT3-fs: mounted filesystem with writeback data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide0(3,7), internal journal EXT3-fs: mounted filesystem with writeback data mode. found reiserfs format "3.6" with standard journal Reiserfs journal params: device ide0(3,8), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (ide0(3,8)) for (ide0(3,8)) Using r5 hash to sort names blk: queue c044501c, I/O limit 4095Mb (mask 0xffffffff) IA-32 Microcode Update Driver: v1.11 microcode: CPU0 already at revision 28 (current=28) microcode: freed 2048 bytes parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP] parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) Module parport cannot be unloaded due to unsafe usage in include/linux/module.h:457 Module parport_pc cannot be unloaded due to unsafe usage in include/linux/module.h:457 parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) ip_tables: (C) 2000-2002 Netfilter core team Intel(R) PRO/100 Network Driver - version 2.1.29-k4 Copyright (c) 2002 Intel Corporation e100: selftest OK. Freeing alive device de9fc000, eth%d e100: eth0: Intel(R) PRO/100 VE Network Connection Hardware receive checksums enabled e100: selftest OK. e100: eth1: Intel(R) PRO/100 S Desktop Adapter Hardware receive checksums enabled cpu cycle saver enabled e100: eth0 NIC Link is Up 100 Mbps Full duplex e100: eth1 NIC Link is Up 10 Mbps Half duplex 24.55.66.1 sent an invalid ICMP error to a broadcast. Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky Module tun cannot be unloaded due to unsafe usage in include/linux/module.h:457 ip_conntrack version 2.1 (4086 buckets, 32688 max) - 300 bytes per conntrack Module iptable_filter cannot be unloaded due to unsafe usage in include/linux/module.h:423 Module iptable_nat cannot be unloaded due to unsafe usage in include/linux/module.h:423 Module iptable_mangle cannot be unloaded due to unsafe usage in include/linux/module.h:423 warning: process `update' used the obsolete bdflush system call Fix your initscripts? mtrr: base(0xf8000000) is not aligned on a size(0x180000) boundary warning: process `update' used the obsolete bdflush system call Fix your initscripts? spurious 8259A interrupt: IRQ7. mtrr: base(0xf8000000) is not aligned on a size(0x180000) boundary Unable to handle kernel paging request at virtual address 322d322e printing eip: c014110d *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0060:[] Not tainted EFLAGS: 00013206 EIP is at page_remove_rmap+0xcd/0x140 eax: 322e3a2e ebx: c13e1520 ecx: 00000007 edx: 322d322e esi: d5aff17c edi: 00000000 ebp: d56b9b88 esp: d56b9b70 ds: 007b es: 007b ss: 0068 Process X (pid: 1404, threadinfo=d56b8000 task=d67ed900) Stack: d56b9bb0 322d322e d79edd20 d5aff17c 00017000 000d0000 d56b9bb4 c013b165 c13e1548 d56b8000 d56b8000 00000000 c13e1520 18d54025 d916e084 08448000 08118000 d56b9bdc c013b20e c042bd0c d916e080 08048000 000d0000 c042bd0c Call Trace: [] zap_pte_range+0x165/0x1c0 [] zap_pmd_range+0x4e/0x70 [] unmap_page_range+0x4e/0x80 [] unmap_vmas+0xdd/0x240 [] exit_mmap+0x76/0x190 [] mmput+0x55/0xb0 [] exec_mmap+0xb4/0x130 [] flush_old_exec+0x20/0x190 [] load_elf_binary+0x2a1/0xc00 [] load_elf_binary+0x0/0xc00 [] search_binary_handler+0x84/0x1f0 [] do_execve+0x1a9/0x200 [] sys_execve+0x4d/0x80 [] syscall_call+0x7/0xb Code: 8b 02 31 c9 89 45 ec 8b 44 8a 04 85 c0 74 0a 83 ff ff 0f 44 <6>note: X[1404] exited with preempt_count 2 Unable to handle kernel paging request at virtual address 3a4e3a7b printing eip: c01494c5 *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0060:[] Not tainted EFLAGS: 00013202 EIP is at filp_close+0x25/0xa0 eax: 3a4e3a4f ebx: d7ab0f60 ecx: d8db97c0 edx: d7ab0f60 esi: 00000000 edi: d6825e00 ebp: d56b9a1c esp: d56b9a08 ds: 007b es: 007b ss: 0068 Process X (pid: 1404, threadinfo=d56b8000 task=d67ed900) Stack: d8db97c0 d6825e00 000000ff 00000002 d6825e00 d56b9a3c c011b84c d7ab0f60 d6825e00 00000001 d6825e00 00000000 d67ed900 d56b9a60 c011bf48 d67ed900 d903f060 0000057c 00000002 d56b8000 d56b9b3c d67ed900 d56b9a7c c0109f66 Call Trace: [] put_files_struct+0x7c/0xf0 [] do_exit+0x148/0x310 [] die+0x86/0x90 [] do_page_fault+0x15d/0x4e4 [] file_read_actor+0xe6/0xf0 [] do_generic_mapping_read+0x18f/0x390 [] update_atime+0x1d/0xc0 [] file_read_actor+0x0/0xf0 [] __generic_file_aio_read+0x1a9/0x1f0 [] do_page_fault+0x0/0x4e4 [] error_code+0x2d/0x38 [] page_remove_rmap+0xcd/0x140 [] zap_pte_range+0x165/0x1c0 [] zap_pmd_range+0x4e/0x70 [] unmap_page_range+0x4e/0x80 [] unmap_vmas+0xdd/0x240 [] exit_mmap+0x76/0x190 [] mmput+0x55/0xb0 [] exec_mmap+0xb4/0x130 [] flush_old_exec+0x20/0x190 [] load_elf_binary+0x2a1/0xc00 [] load_elf_binary+0x0/0xc00 [] search_binary_handler+0x84/0x1f0 [] do_execve+0x1a9/0x200 [] sys_execve+0x4d/0x80 [] syscall_call+0x7/0xb Code: 8b 40 2c 85 c0 74 27 ba 00 e0 ff ff 21 e2 8b 02 8b 48 14 41 <6>note: X[1404] exited with preempt_count 2 Unable to handle kernel paging request at virtual address 3a2e3a2e printing eip: c014110d *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0060:[] Not tainted EFLAGS: 00010206 EIP is at page_remove_rmap+0xcd/0x140 eax: 3a2f3a4e ebx: c14da2b0 ecx: 00000007 edx: 3a2e3a2e esi: d71ec0cc edi: 00000000 ebp: d7505b88 esp: d7505b70 ds: 007b es: 007b ss: 0068 Process Default (pid: 1407, threadinfo=d7504000 task=d67ed900) Stack: d6d67ce0 3a2e3a2e d79ed380 d71ec0cc 00000000 00036000 d7505bb4 c013b165 c13a4e18 d7504000 d7504000 00000000 c14da2b0 1f0de005 d6b03404 40433000 40069000 d7505bdc c013b20e c042bd0c d6b03400 40033000 00036000 c042bd0c Call Trace: [] zap_pte_range+0x165/0x1c0 [] zap_pmd_range+0x4e/0x70 [] unmap_page_range+0x4e/0x80 [] unmap_vmas+0xdd/0x240 [] exit_mmap+0x76/0x190 [] mmput+0x55/0xb0 [] exec_mmap+0xb4/0x130 [] flush_old_exec+0x20/0x190 [] load_elf_binary+0x2a1/0xc00 [] load_elf_binary+0x0/0xc00 [] search_binary_handler+0x84/0x1f0 [] do_execve+0x1a9/0x200 [] sys_execve+0x4d/0x80 [] syscall_call+0x7/0xb Code: 8b 02 31 c9 89 45 ec 8b 44 8a 04 85 c0 74 0a 83 ff ff 0f 44 <6>note: Default[1407] exited with preempt_count 2 Unable to handle kernel paging request at virtual address 3a2e322e printing eip: c014110d *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0060:[] Not tainted EFLAGS: 00010206 EIP is at page_remove_rmap+0xcd/0x140 eax: 3a2e3a2e ebx: c13f0098 ecx: 00000007 edx: 3a2e322e esi: d70f8144 edi: 00000000 ebp: d7621b88 esp: d7621b70 ds: 007b es: 007b ss: 0068 Process gdm-binary (pid: 1408, threadinfo=d7620000 task=d93232a0) Stack: d7621bb0 3a2e322e d7a2b820 d70f8144 00009000 0002b000 d7621bb4 c013b165 c13e6d40 d7620000 d7620000 00000000 c13f0098 19337005 d7574084 08448000 08073000 d7621bdc c013b20e c042bd0c d7574080 08048000 0002b000 c042bd0c Call Trace: [] zap_pte_range+0x165/0x1c0 [] zap_pmd_range+0x4e/0x70 [] unmap_page_range+0x4e/0x80 [] unmap_vmas+0xdd/0x240 [] exit_mmap+0x76/0x190 [] mmput+0x55/0xb0 [] exec_mmap+0xb4/0x130 [] flush_old_exec+0x20/0x190 [] load_elf_binary+0x2a1/0xc00 [] load_elf_binary+0x0/0xc00 [] search_binary_handler+0x84/0x1f0 [] do_execve+0x1a9/0x200 [] sys_execve+0x4d/0x80 [] syscall_call+0x7/0xb Code: 8b 02 31 c9 89 45 ec 8b 44 8a 04 85 c0 74 0a 83 ff ff 0f 44 <6>note: gdm-binary[1408] exited with preempt_count 2 Unable to handle kernel paging request at virtual address 370f75bd printing eip: c01494c5 *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0060:[] Not tainted EFLAGS: 00010202 EIP is at filp_close+0x25/0xa0 eax: 370f7591 ebx: d78a5e40 ecx: d75b6ea0 edx: d78a5e40 esi: 00000000 edi: df73d0e0 ebp: d7621a1c esp: d7621a08 ds: 007b es: 007b ss: 0068 Process gdm-binary (pid: 1408, threadinfo=d7620000 task=d93232a0) Stack: d75b6ea0 df73d0e0 00000007 00000001 df73d0e0 d7621a3c c011b84c d78a5e40 df73d0e0 00000001 df73d0e0 00000000 d93232a0 d7621a60 c011bf48 d93232a0 d903f060 00000580 00000002 d7620000 d7621b3c d93232a0 d7621a7c c0109f66 Call Trace: [] put_files_struct+0x7c/0xf0 [] do_exit+0x148/0x310 [] die+0x86/0x90 [] do_page_fault+0x15d/0x4e4 [] file_read_actor+0xe6/0xf0 [] do_generic_mapping_read+0x18f/0x390 [] update_atime+0x1d/0xc0 [] file_read_actor+0x0/0xf0 [] __generic_file_aio_read+0x1a9/0x1f0 [] do_page_fault+0x0/0x4e4 [] error_code+0x2d/0x38 [] page_remove_rmap+0xcd/0x140 [] zap_pte_range+0x165/0x1c0 [] zap_pmd_range+0x4e/0x70 [] unmap_page_range+0x4e/0x80 [] unmap_vmas+0xdd/0x240 [] exit_mmap+0x76/0x190 [] mmput+0x55/0xb0 [] exec_mmap+0xb4/0x130 [] flush_old_exec+0x20/0x190 [] load_elf_binary+0x2a1/0xc00 [] load_elf_binary+0x0/0xc00 [] search_binary_handler+0x84/0x1f0 [] do_execve+0x1a9/0x200 [] sys_execve+0x4d/0x80 [] syscall_call+0x7/0xb Code: 8b 40 2c 85 c0 74 27 ba 00 e0 ff ff 21 e2 8b 02 8b 48 14 41 <6>note: gdm-binary[1408] exited with preempt_count 2 agp_allocate_memory: de7e78e0 agp_allocate_memory: 00000000 agp_allocate_memory: d7b41f20 --------------090407040301000306050105 Content-Type: text/plain; name="config-2.5.64bk3" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="config-2.5.64bk3" # # Automatically generated make config: don't edit # CONFIG_X86=y CONFIG_MMU=y CONFIG_SWAP=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y # # General setup # CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y CONFIG_LOG_BUF_SHIFT=14 # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_KMOD=y # # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set CONFIG_MPENTIUMII=y # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MELAN is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=5 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y # CONFIG_HUGETLB_PAGE is not set # CONFIG_SMP is not set CONFIG_PREEMPT=y # CONFIG_X86_UP_APIC is not set CONFIG_X86_TSC=y CONFIG_X86_MCE=y # CONFIG_X86_MCE_NONFATAL is not set # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set CONFIG_MICROCODE=m CONFIG_X86_MSR=m CONFIG_X86_CPUID=m # CONFIG_EDD is not set CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y CONFIG_HAVE_DEC_LOCK=y # # Power management options (ACPI, APM) # # CONFIG_PM is not set # # ACPI Support # CONFIG_ACPI=y CONFIG_ACPI_BOOT=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_TOSHIBA is not set CONFIG_ACPI_DEBUG=y CONFIG_ACPI_BUS=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y # CONFIG_SCx200 is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y CONFIG_ISA=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_HOTPLUG is not set # # Executable file formats # CONFIG_KCORE_ELF=y # CONFIG_KCORE_AOUT is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=m CONFIG_PARPORT_PC=m CONFIG_PARPORT_PC_CML1=m # CONFIG_PARPORT_SERIAL is not set CONFIG_PARPORT_PC_FIFO=y # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_OTHER is not set CONFIG_PARPORT_1284=y # # Plug and Play support # CONFIG_PNP=y CONFIG_PNP_NAMES=y # CONFIG_PNP_CARD is not set # CONFIG_PNP_DEBUG is not set # # Protocols # # CONFIG_PNPBIOS is not set # # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_LBD is not set # # ATA/ATAPI/MFM/RLL device support # CONFIG_IDE=y # # IDE, ATA and ATAPI Block devices # CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set # CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_IDEDISK_STROKE is not set CONFIG_BLK_DEV_IDECD=m CONFIG_BLK_DEV_IDEFLOPPY=m # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set # # IDE chipset support/bugfixes # CONFIG_BLK_DEV_CMD640=y # CONFIG_BLK_DEV_CMD640_ENHANCED is not set # CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_BLK_DEV_GENERIC=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDE_TCQ is not set # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_PCI_WIP is not set CONFIG_BLK_DEV_ADMA=y # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_RZ1000 is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_IDE_CHIPSETS is not set CONFIG_IDEDMA_AUTO=y # CONFIG_IDEDMA_IVB is not set CONFIG_BLK_DEV_IDE_MODES=y # # SCSI device support # CONFIG_SCSI=m # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=m # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_REPORT_LUNS is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_NCR53C7xx is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_NCR53C8XX is not set # CONFIG_SCSI_SYM53C8XX is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_SEAGATE is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support (EXPERIMENTAL) # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # # Networking support # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_NETLINK_DEV=y CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_FILTER=y CONFIG_UNIX=y CONFIG_NET_KEY=m CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_FWMARK=y CONFIG_IP_ROUTE_NAT=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_TOS=y CONFIG_IP_ROUTE_VERBOSE=y # CONFIG_IP_ROUTE_LARGE_TABLES is not set # CONFIG_IP_PNP is not set CONFIG_NET_IPIP=m CONFIG_NET_IPGRE=m CONFIG_NET_IPGRE_BROADCAST=y # CONFIG_IP_MROUTE is not set CONFIG_ARPD=y CONFIG_INET_ECN=y CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_XFRM_USER=m # # IP: Netfilter Configuration # CONFIG_IP_NF_CONNTRACK=m CONFIG_IP_NF_FTP=m CONFIG_IP_NF_IRC=m CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_LIMIT=m CONFIG_IP_NF_MATCH_MAC=m CONFIG_IP_NF_MATCH_PKTTYPE=m CONFIG_IP_NF_MATCH_MARK=m CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_DSCP=m CONFIG_IP_NF_MATCH_AH_ESP=m CONFIG_IP_NF_MATCH_LENGTH=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_MATCH_TCPMSS=m CONFIG_IP_NF_MATCH_HELPER=m CONFIG_IP_NF_MATCH_STATE=m CONFIG_IP_NF_MATCH_CONNTRACK=m CONFIG_IP_NF_MATCH_UNCLEAN=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_MIRROR=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_NAT_LOCAL=y CONFIG_IP_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_NAT_IRC=m CONFIG_IP_NF_NAT_FTP=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_DSCP=m CONFIG_IP_NF_TARGET_MARK=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m # CONFIG_IP_NF_COMPAT_IPCHAINS is not set # CONFIG_IP_NF_COMPAT_IPFWADM is not set # CONFIG_IPV6 is not set # # SCTP Configuration (EXPERIMENTAL) # CONFIG_IPV6_SCTP__=y # CONFIG_IP_SCTP is not set # CONFIG_ATM is not set # CONFIG_VLAN_8021Q is not set # CONFIG_LLC is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # CONFIG_NET_SCHED=y CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_CSZ=m CONFIG_NET_SCH_PRIO=m CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m CONFIG_NET_SCH_TBF=m CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_INGRESS=m CONFIG_NET_QOS=y CONFIG_NET_ESTIMATOR=y CONFIG_NET_CLS=y CONFIG_NET_CLS_TCINDEX=m CONFIG_NET_CLS_ROUTE4=m CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m CONFIG_NET_CLS_POLICE=y # # Network testing # CONFIG_NET_PKTGEN=m CONFIG_NETDEVICES=y # # ARCnet devices # # CONFIG_ARCNET is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m # CONFIG_ETHERTAP is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set CONFIG_NET_VENDOR_3COM=y # CONFIG_EL1 is not set # CONFIG_EL2 is not set # CONFIG_ELPLUS is not set # CONFIG_EL16 is not set # CONFIG_EL3 is not set CONFIG_3C515=m CONFIG_VORTEX=m # CONFIG_TYPHOON is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # # Tulip family network device support # # CONFIG_NET_TULIP is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set # CONFIG_B44 is not set # CONFIG_CS89x0 is not set # CONFIG_DGRS is not set CONFIG_EEPRO100=m # CONFIG_EEPRO100_PIO is not set CONFIG_E100=m # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=m CONFIG_E1000_NAPI=y # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set CONFIG_PPP_FILTER=y CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m CONFIG_PPPOE=m # CONFIG_SLIP is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Token Ring devices (depends on LLC=y) # # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set # # Wan interfaces # # CONFIG_WAN is not set # # Amateur Radio support # # CONFIG_HAMRADIO is not set # # IrDA (infrared) support # # CONFIG_IRDA is not set # # ISDN subsystem # # CONFIG_ISDN_BOOL is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=m # CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=m CONFIG_INPUT_EVBUG=m # # Input I/O drivers # # CONFIG_GAMEPORT is not set CONFIG_SOUND_GAMEPORT=y CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=m # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y CONFIG_KEYBOARD_SUNKBD=m CONFIG_KEYBOARD_XTKBD=m # CONFIG_KEYBOARD_NEWTON is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_CONSOLE is not set # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set # CONFIG_PPDEV is not set # CONFIG_TIPAR is not set # # I2C support # # CONFIG_I2C is not set # # I2C Hardware Sensors Mainboard support # # # I2C Hardware Sensors Chip support # # # Mice # # CONFIG_BUSMOUSE is not set # CONFIG_QIC02_TAPE is not set # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set CONFIG_INTEL_RNG=m # CONFIG_AMD_RNG is not set CONFIG_NVRAM=m CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set CONFIG_AGP=y # CONFIG_AGP3 is not set CONFIG_AGP_INTEL=y # CONFIG_AGP_VIA is not set # CONFIG_AGP_AMD is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_ALI is not set # CONFIG_AGP_SWORKS is not set # CONFIG_AGP_AMD_8151 is not set CONFIG_DRM=y CONFIG_DRM_TDFX=m CONFIG_DRM_R128=m # CONFIG_DRM_RADEON is not set CONFIG_DRM_I810=y # CONFIG_DRM_I830 is not set # CONFIG_DRM_MGA is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set CONFIG_HANGCHECK_TIMER=m # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # File systems # CONFIG_QUOTA=y CONFIG_QFMT_V1=m CONFIG_QFMT_V2=m CONFIG_QUOTACTL=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set CONFIG_REISERFS_PROC_INFO=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_FAT_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set CONFIG_TMPFS=y CONFIG_RAMFS=y CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y # CONFIG_JFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_VXFS_FS is not set # CONFIG_NTFS_FS is not set # CONFIG_HPFS_FS is not set CONFIG_PROC_FS=y # CONFIG_DEVFS_FS is not set CONFIG_DEVPTS_FS=y # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y # CONFIG_EXT2_FS_POSIX_ACL is not set # CONFIG_SYSV_FS is not set CONFIG_UDF_FS=y # CONFIG_UFS_FS is not set # CONFIG_XFS_FS is not set # # Network File Systems # # CONFIG_CODA_FS is not set # CONFIG_INTERMEZZO_FS is not set CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_NFSD=y CONFIG_NFSD_V3=y CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=m CONFIG_RPCSEC_GSS_KRB5=m CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y # CONFIG_CIFS is not set CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_NCP_FS is not set # CONFIG_AFS_FS is not set CONFIG_ZISOFS_FS=y CONFIG_FS_MBCACHE=y CONFIG_FS_POSIX_ACL=y # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y # CONFIG_MINIX_SUBPARTITION is not set CONFIG_SOLARIS_X86_PARTITION=y CONFIG_UNIXWARE_DISKLABEL=y # CONFIG_LDM_PARTITION is not set CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set CONFIG_SUN_PARTITION=y # CONFIG_EFI_PARTITION is not set CONFIG_SMB_NLS=y CONFIG_NLS=y # # Native Language Support # CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m CONFIG_NLS_CODEPAGE_775=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_CODEPAGE_852=m CONFIG_NLS_CODEPAGE_855=m CONFIG_NLS_CODEPAGE_857=m CONFIG_NLS_CODEPAGE_860=m CONFIG_NLS_CODEPAGE_861=m CONFIG_NLS_CODEPAGE_862=m CONFIG_NLS_CODEPAGE_863=m CONFIG_NLS_CODEPAGE_864=m CONFIG_NLS_CODEPAGE_865=m CONFIG_NLS_CODEPAGE_866=m CONFIG_NLS_CODEPAGE_869=m CONFIG_NLS_CODEPAGE_936=m CONFIG_NLS_CODEPAGE_950=m CONFIG_NLS_CODEPAGE_932=m CONFIG_NLS_CODEPAGE_949=m CONFIG_NLS_CODEPAGE_874=m CONFIG_NLS_ISO8859_8=m CONFIG_NLS_CODEPAGE_1250=y CONFIG_NLS_CODEPAGE_1251=m CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_2=m CONFIG_NLS_ISO8859_3=m CONFIG_NLS_ISO8859_4=m CONFIG_NLS_ISO8859_5=m CONFIG_NLS_ISO8859_6=m CONFIG_NLS_ISO8859_7=m CONFIG_NLS_ISO8859_9=m CONFIG_NLS_ISO8859_13=m CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # # Graphics support # # CONFIG_FB is not set # CONFIG_VIDEO_SELECT is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y # # Sound # CONFIG_SOUND=m # # Advanced Linux Sound Architecture # CONFIG_SND=m CONFIG_SND_SEQUENCER=m CONFIG_SND_SEQ_DUMMY=m CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_RTCTIMER=m CONFIG_SND_VERBOSE_PRINTK=y # CONFIG_SND_DEBUG is not set # # Generic devices # CONFIG_SND_DUMMY=m CONFIG_SND_VIRMIDI=m CONFIG_SND_MTPAV=m CONFIG_SND_SERIAL_U16550=m CONFIG_SND_MPU401=m # # ISA devices # # CONFIG_SND_AD1848 is not set # CONFIG_SND_CS4231 is not set # CONFIG_SND_CS4232 is not set # CONFIG_SND_CS4236 is not set # CONFIG_SND_ES1688 is not set # CONFIG_SND_ES18XX is not set # CONFIG_SND_GUSCLASSIC is not set # CONFIG_SND_GUSEXTREME is not set # CONFIG_SND_GUSMAX is not set # CONFIG_SND_INTERWAVE is not set # CONFIG_SND_INTERWAVE_STB is not set # CONFIG_SND_OPTI92X_AD1848 is not set # CONFIG_SND_OPTI92X_CS4231 is not set # CONFIG_SND_OPTI93X is not set # CONFIG_SND_SB8 is not set # CONFIG_SND_SB16 is not set # CONFIG_SND_SBAWE is not set # CONFIG_SND_WAVEFRONT is not set # CONFIG_SND_CMI8330 is not set # CONFIG_SND_OPL3SA2 is not set # CONFIG_SND_SGALAXY is not set # # PCI devices # # CONFIG_SND_ALI5451 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_YMFPCI is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_CMIPCI is not set CONFIG_SND_ENS1370=m CONFIG_SND_ENS1371=m # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_FM801 is not set # CONFIG_SND_ICE1712 is not set CONFIG_SND_INTEL8X0=m # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_VIA82XX is not set # # ALSA USB devices # # CONFIG_SND_USB_AUDIO is not set # # Open Sound System # CONFIG_SOUND_PRIME=m # CONFIG_SOUND_BT878 is not set # CONFIG_SOUND_CMPCI is not set CONFIG_SOUND_EMU10K1=m CONFIG_MIDI_EMU10K1=y # CONFIG_SOUND_FUSION is not set # CONFIG_SOUND_CS4281 is not set CONFIG_SOUND_ES1370=m CONFIG_SOUND_ES1371=m # CONFIG_SOUND_ESSSOLO1 is not set # CONFIG_SOUND_MAESTRO is not set # CONFIG_SOUND_MAESTRO3 is not set CONFIG_SOUND_ICH=m # CONFIG_SOUND_RME96XX is not set # CONFIG_SOUND_SONICVIBES is not set # CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set # CONFIG_SOUND_VIA82CXXX is not set CONFIG_SOUND_OSS=m CONFIG_SOUND_TRACEINIT=y CONFIG_SOUND_DMAP=y # CONFIG_SOUND_AD1816 is not set # CONFIG_SOUND_SGALAXY is not set # CONFIG_SOUND_ADLIB is not set # CONFIG_SOUND_ACI_MIXER is not set # CONFIG_SOUND_CS4232 is not set # CONFIG_SOUND_SSCAPE is not set # CONFIG_SOUND_GUS is not set CONFIG_SOUND_VMIDI=m # CONFIG_SOUND_TRIX is not set # CONFIG_SOUND_MSS is not set CONFIG_SOUND_MPU401=m # CONFIG_SOUND_NM256 is not set # CONFIG_SOUND_MAD16 is not set # CONFIG_SOUND_PAS is not set # CONFIG_SOUND_PSS is not set CONFIG_SOUND_SB=m CONFIG_SOUND_AWE32_SYNTH=m # CONFIG_SOUND_WAVEFRONT is not set # CONFIG_SOUND_MAUI is not set CONFIG_SOUND_YM3812=m CONFIG_SOUND_OPL3SA1=m CONFIG_SOUND_OPL3SA2=m # CONFIG_SOUND_YMFPCI is not set # CONFIG_SOUND_UART6850 is not set # CONFIG_SOUND_AEDSP16 is not set # # USB support # CONFIG_USB=m CONFIG_USB_DEBUG=y # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y CONFIG_USB_BANDWIDTH=y # CONFIG_USB_DYNAMIC_MINORS is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=m CONFIG_USB_OHCI_HCD=m CONFIG_USB_UHCI_HCD=m # # USB Device Class drivers # # CONFIG_USB_AUDIO is not set # CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_HP8200e is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # # USB Human Interface Devices (HID) # # CONFIG_USB_HID is not set # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_XPAD is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_SCANNER is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USB_HPUSBSCSI is not set # # USB Multimedia devices # # CONFIG_USB_DABUSB is not set # # Video4Linux support is needed for USB Multimedia device support # # # USB Network adaptors # # CONFIG_USB_CATC is not set # CONFIG_USB_CDCETHER is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # # USB port drivers # # CONFIG_USB_USS720 is not set # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_BRLVGER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_TEST is not set # # Bluetooth support # # CONFIG_BT is not set # # Profiling support # # CONFIG_PROFILING is not set # # Kernel hacking # CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_IOVIRT is not set CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_SPINLOCK is not set CONFIG_KALLSYMS=y CONFIG_DEBUG_SPINLOCK_SLEEP=y CONFIG_FRAME_POINTER=y # # Security options # # CONFIG_SECURITY is not set # # Cryptographic options # CONFIG_CRYPTO=y CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_TEST=m # # Library routines # CONFIG_CRC32=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_X86_BIOS_REBOOT=y --------------090407040301000306050105-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/