Subject: Re: [RESEND PATCH v1 4/4] clk: rockchip: rk3036: fix and add node id
 for emac clock
To: =?UTF-8?Q?Heiko_St=c3=bcbner?= <heiko@sntech.de>,
        Xing Zheng <zhengxing@rock-chips.com>
References: <1451293433-32392-1-git-send-email-zhengxing@rock-chips.com>
 <1451293433-32392-5-git-send-email-zhengxing@rock-chips.com>
 <11997168.T384RkEsFx@diego>
Cc: Mark Rutland <mark.rutland@arm.com>, devicetree@vger.kernel.org,
        Pawel Moll <pawel.moll@arm.com>,
        Ian Campbell <ijc+devicetree@hellion.org.uk>,
        Michael Turquette <mturquette@baylibre.com>,
        Kumar Gala <galak@codeaurora.org>, Stephen Boyd <sboyd@codeaurora.org>,
        linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org,
        Rob Herring <robh+dt@kernel.org>, linux-arm-kernel@lists.infradead.org,
        keescook@google.com, linux-clk@vger.kernel.org, leozwang@google.com
From: Yakir Yang <ykk@rock-chips.com>
Message-ID: <5681E8E4.2010303@rock-chips.com>
Date: Tue, 29 Dec 2015 09:59:00 +0800
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101
 Thunderbird/38.3.0
MIME-Version: 1.0
In-Reply-To: <11997168.T384RkEsFx@diego>
Content-Type: text/plain; charset=windows-1252; format=flowed
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 4815
Lines: 124

Hi Heiko,

On 12/28/2015 08:41 PM, Heiko St?bner wrote:
> Hi,
>
> Am Montag, 28. Dezember 2015, 17:03:53 schrieb Xing Zheng:
>> Due to referred old version TRM, there is incorrect emac clock node,
>> we should fix it. The SEL_21_9 is the parent of SEL_21_4.
>>
>> In the emac driver, we need to refer HCLK_MAC, and  because There are
>> only 3PLLs (APLL/GPLL/DPLL) on the rk3036, most clock are under the
>> GPLL, and it is unable to provide the accurate rate for mac_ref which
>> need to 50MHz probability, we should let it under the APLL and are
>> able to set the freq which integer multiples of 50MHz, so we add these
>> emac node for reference.
> I don't really follow here. While I do understand that the emac needs 50MHz, I
> don't think using the APLL as source is helpful.
>
> The APLL is the main clocksource for the cpu-cores, including frequency
> scaling, and while it currently only lists 816MHz as sole frequency, you're
> pretty much guaranteed to not get your correct multiple of 50MHz from there
> either. And limiting the cpu to just do 600MHz to get the mac working sounds
> pretty bad ;-) .
>
>
> In the rk3036 cru-node the gpll gets set to 594MHz. Is there a special reason
> why it needs to be 594MHz and cannot be a round 600MHz? Because that would
> also provide your 50MHz-multiple nicely.

Yes, this magic 594MHz would help to support the standard HDMI 
resolutions, here are the math:

1920x1080-60Hz DCLK = 148.5MHz = 594MHz / 4
1280x720-60Hz DCLK = 74.25MHz = 594MHz / 8
720x480-60Hz DCLK = 27MHz = 594MHz / 22

Thanks,
- Yakir

>> Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
>> ---
>>
>>   drivers/clk/rockchip/clk-rk3036.c      |   11 ++++++-----
>>   include/dt-bindings/clock/rk3036-cru.h |    2 ++
>>   2 files changed, 8 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/clk/rockchip/clk-rk3036.c
>> b/drivers/clk/rockchip/clk-rk3036.c index 7420cbe..7863c4d 100644
>> --- a/drivers/clk/rockchip/clk-rk3036.c
>> +++ b/drivers/clk/rockchip/clk-rk3036.c
>> @@ -328,13 +328,14 @@ static struct rockchip_clk_branch
>> rk3036_clk_branches[] __initdata = { RK2928_CLKSEL_CON(16), 0, 2, MFLAGS,
>> 2, 5, DFLAGS,
>>   			RK2928_CLKGATE_CON(10), 5, GFLAGS),
>>
>> -	COMPOSITE_NOGATE(0, "mac_pll_src", mux_pll_src_3plls_p, 0,
>> -			RK2928_CLKSEL_CON(21), 0, 2, MFLAGS, 4, 5, DFLAGS),
>> +	MUX(SCLK_MACPLL, "mac_pll_pre", mux_pll_src_3plls_p, 0,
>> +			RK2928_CLKSEL_CON(21), 0, 2, MFLAGS),
>> +	DIV(0, "mac_pll_src", "mac_pll_pre", 0,
>> +			RK2928_CLKSEL_CON(21), 9, 5, DFLAGS),
>>   	MUX(SCLK_MACREF, "mac_clk_ref", mux_mac_p, CLK_SET_RATE_PARENT,
>>   			RK2928_CLKSEL_CON(21), 3, 1, MFLAGS),
>> -
>>   	COMPOSITE_NOMUX(SCLK_MAC, "mac_clk", "mac_clk_ref", 0,
>> -			RK2928_CLKSEL_CON(21), 9, 5, DFLAGS,
>> +			RK2928_CLKSEL_CON(21), 4, 5, DFLAGS,
>>   			RK2928_CLKGATE_CON(2), 6, GFLAGS),
>>
>>   	MUX(SCLK_HDMI, "dclk_hdmi", mux_dclk_p, 0,
>> @@ -389,7 +390,7 @@ static struct rockchip_clk_branch rk3036_clk_branches[]
>> __initdata = { GATE(HCLK_OTG1, "hclk_otg1", "hclk_peri", CLK_IGNORE_UNUSED,
>> RK2928_CLKGATE_CON(7), 3, GFLAGS), GATE(HCLK_I2S, "hclk_i2s", "hclk_peri",
>> 0, RK2928_CLKGATE_CON(7), 2, GFLAGS), GATE(0, "hclk_sfc", "hclk_peri",
>> CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 14, GFLAGS), -	GATE(0,
>> "hclk_mac", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 15,
>> GFLAGS), +	GATE(HCLK_MAC, "hclk_mac", "hclk_peri", 0,
>> RK2928_CLKGATE_CON(3), 5, GFLAGS),
>>
>>   	/* pclk_peri gates */
>>   	GATE(0, "pclk_peri_matrix", "pclk_peri", CLK_IGNORE_UNUSED,
>> RK2928_CLKGATE_CON(4), 1, GFLAGS), diff --git
>> a/include/dt-bindings/clock/rk3036-cru.h
>> b/include/dt-bindings/clock/rk3036-cru.h index ebc7a7b..de44109 100644
>> --- a/include/dt-bindings/clock/rk3036-cru.h
>> +++ b/include/dt-bindings/clock/rk3036-cru.h
>> @@ -54,6 +54,7 @@
>>   #define SCLK_PVTM_VIDEO		125
>>   #define SCLK_MAC		151
>>   #define SCLK_MACREF		152
>> +#define SCLK_MACPLL		153
>>   #define SCLK_SFC		160
>>
>>   /* aclk gates */
>> @@ -92,6 +93,7 @@
> please separate the hclk addition into two separate patches:
> patch1: add the clock-id to the dt-binding header
> patch2: use the clock in the clock-driver
>
>>   #define HCLK_SDMMC		456
>>   #define HCLK_SDIO		457
>>   #define HCLK_EMMC		459
>> +#define HCLK_MAC		460
>>   #define HCLK_I2S		462
>>   #define HCLK_LCDC		465
>>   #define HCLK_ROM		467
>
> Thanks
> Heiko
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
>
>
>


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/