Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755644AbcCCBd5 (ORCPT ); Wed, 2 Mar 2016 20:33:57 -0500 Received: from mail-pa0-f41.google.com ([209.85.220.41]:34442 "EHLO mail-pa0-f41.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754846AbcCCBdx (ORCPT ); Wed, 2 Mar 2016 20:33:53 -0500 From: Guodong Xu To: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, jh80.chung@samsung.com, ulf.hansson@linaro.org, shawn.lin@rock-chips.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org Cc: Guodong Xu Subject: [PATCH 1/2] Documentation: synopsys-dw-mshc: add binding for resets Date: Thu, 3 Mar 2016 09:33:37 +0800 Message-Id: <1456968818-22140-1-git-send-email-guodong.xu@linaro.org> X-Mailer: git-send-email 1.9.1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1529 Lines: 37 Add resets property to synopsys-dw-mshc bindings. It is intended to represent the hardware reset signal present internally in some host controller IC designs. See Documentation/devicetree/bindings/reset/reset.txt for details. Signed-off-by: Guodong Xu --- Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt index 8636f5a..9b4896c 100644 --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt @@ -39,6 +39,10 @@ Required Properties: Optional properties: +* resets: phandle + reset specifier pair, intended to represent hardware + reset signal present internally in some host controller IC designs. + See Documentation/devicetree/bindings/reset/reset.txt for details. + * clocks: from common clock binding: handle to biu and ciu clocks for the bus interface unit clock and the card interface unit clock. @@ -48,7 +52,7 @@ Optional properties: clock-frequency. It is an error to omit both the ciu clock and the clock-frequency. -* clock-frequency: should be the frequency (in Hz) of the ciu clock. If this +* clock-frequency: should be tke frequency (in Hz) of the ciu clock. If this is specified and the ciu clock is specified then we'll try to set the ciu clock to this at probe time. -- 1.9.1