Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932523AbcCCW2q (ORCPT ); Thu, 3 Mar 2016 17:28:46 -0500 Received: from mail.lysator.liu.se ([130.236.254.3]:57403 "EHLO mail.lysator.liu.se" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757223AbcCCW2n (ORCPT ); Thu, 3 Mar 2016 17:28:43 -0500 From: Peter Rosin To: linux-kernel@vger.kernel.org Cc: Peter Rosin , Wolfram Sang , Peter Korsgaard , Guenter Roeck , Jonathan Cameron , Hartmut Knaack , Lars-Peter Clausen , Peter Meerwald , Antti Palosaari , Mauro Carvalho Chehab , Rob Herring , Frank Rowand , Grant Likely , Adriana Reus , Viorel Suman , Krzysztof Kozlowski , Terry Heo , Hans Verkuil , Arnd Bergmann , Tommi Rantala , linux-i2c@vger.kernel.org, linux-iio@vger.kernel.org, linux-media@vger.kernel.org, devicetree@vger.kernel.org, Peter Rosin Subject: [PATCH v4 04/18] i2c: i2c-arb-gpio-challenge: convert to use an explicit i2c mux core Date: Thu, 3 Mar 2016 23:27:16 +0100 Message-Id: <1457044050-15230-5-git-send-email-peda@lysator.liu.se> X-Mailer: git-send-email 2.1.4 In-Reply-To: <1457044050-15230-1-git-send-email-peda@lysator.liu.se> References: <1457044050-15230-1-git-send-email-peda@lysator.liu.se> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4640 Lines: 138 From: Peter Rosin Allocate an explicit i2c mux core to handle parent and child adapters etc. Update the select/deselect ops to be in terms of the i2c mux core instead of the child adapter. Signed-off-by: Peter Rosin --- drivers/i2c/muxes/i2c-arb-gpio-challenge.c | 47 +++++++++++++----------------- 1 file changed, 20 insertions(+), 27 deletions(-) diff --git a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c index 402e3a6c671a..a42827b3c672 100644 --- a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c +++ b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c @@ -28,8 +28,6 @@ /** * struct i2c_arbitrator_data - Driver data for I2C arbitrator * - * @parent: Parent adapter - * @child: Child bus * @our_gpio: GPIO we'll use to claim. * @our_gpio_release: 0 if active high; 1 if active low; AKA if the GPIO == * this then consider it released. @@ -42,8 +40,6 @@ */ struct i2c_arbitrator_data { - struct i2c_adapter *parent; - struct i2c_adapter *child; int our_gpio; int our_gpio_release; int their_gpio; @@ -59,9 +55,9 @@ struct i2c_arbitrator_data { * * Use the GPIO-based signalling protocol; return -EBUSY if we fail. */ -static int i2c_arbitrator_select(struct i2c_adapter *adap, void *data, u32 chan) +static int i2c_arbitrator_select(struct i2c_mux_core *muxc, u32 chan) { - const struct i2c_arbitrator_data *arb = data; + const struct i2c_arbitrator_data *arb = i2c_mux_priv(muxc); unsigned long stop_retry, stop_time; /* Start a round of trying to claim the bus */ @@ -93,7 +89,7 @@ static int i2c_arbitrator_select(struct i2c_adapter *adap, void *data, u32 chan) /* Give up, release our claim */ gpio_set_value(arb->our_gpio, arb->our_gpio_release); udelay(arb->slew_delay_us); - dev_err(&adap->dev, "Could not claim bus, timeout\n"); + dev_err(muxc->dev, "Could not claim bus, timeout\n"); return -EBUSY; } @@ -102,10 +98,9 @@ static int i2c_arbitrator_select(struct i2c_adapter *adap, void *data, u32 chan) * * Release the I2C bus using the GPIO-based signalling protocol. */ -static int i2c_arbitrator_deselect(struct i2c_adapter *adap, void *data, - u32 chan) +static int i2c_arbitrator_deselect(struct i2c_mux_core *muxc, u32 chan) { - const struct i2c_arbitrator_data *arb = data; + const struct i2c_arbitrator_data *arb = i2c_mux_priv(muxc); /* Release the bus and wait for the other master to notice */ gpio_set_value(arb->our_gpio, arb->our_gpio_release); @@ -119,6 +114,7 @@ static int i2c_arbitrator_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct device_node *np = dev->of_node; struct device_node *parent_np; + struct i2c_mux_core *muxc; struct i2c_arbitrator_data *arb; enum of_gpio_flags gpio_flags; unsigned long out_init; @@ -134,12 +130,13 @@ static int i2c_arbitrator_probe(struct platform_device *pdev) return -EINVAL; } - arb = devm_kzalloc(dev, sizeof(*arb), GFP_KERNEL); - if (!arb) { - dev_err(dev, "Cannot allocate i2c_arbitrator_data\n"); + muxc = i2c_mux_alloc(NULL, dev, sizeof(*arb), 0, + i2c_arbitrator_select, i2c_arbitrator_deselect); + if (!muxc) return -ENOMEM; - } - platform_set_drvdata(pdev, arb); + arb = i2c_mux_priv(muxc); + + platform_set_drvdata(pdev, muxc); /* Request GPIOs */ ret = of_get_named_gpio_flags(np, "our-claim-gpio", 0, &gpio_flags); @@ -196,21 +193,18 @@ static int i2c_arbitrator_probe(struct platform_device *pdev) dev_err(dev, "Cannot parse i2c-parent\n"); return -EINVAL; } - arb->parent = of_get_i2c_adapter_by_node(parent_np); + muxc->parent = of_get_i2c_adapter_by_node(parent_np); of_node_put(parent_np); - if (!arb->parent) { + if (!muxc->parent) { dev_err(dev, "Cannot find parent bus\n"); return -EPROBE_DEFER; } /* Actually add the mux adapter */ - arb->child = i2c_add_mux_adapter(arb->parent, dev, arb, 0, 0, 0, - i2c_arbitrator_select, - i2c_arbitrator_deselect); - if (!arb->child) { + ret = i2c_mux_add_adapter(muxc, 0, 0, 0); + if (ret) { dev_err(dev, "Failed to add adapter\n"); - ret = -ENODEV; - i2c_put_adapter(arb->parent); + i2c_put_adapter(muxc->parent); } return ret; @@ -218,11 +212,10 @@ static int i2c_arbitrator_probe(struct platform_device *pdev) static int i2c_arbitrator_remove(struct platform_device *pdev) { - struct i2c_arbitrator_data *arb = platform_get_drvdata(pdev); - - i2c_del_mux_adapter(arb->child); - i2c_put_adapter(arb->parent); + struct i2c_mux_core *muxc = platform_get_drvdata(pdev); + i2c_mux_del_adapters(muxc); + i2c_put_adapter(muxc->parent); return 0; } -- 2.1.4