Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758865AbcCDKJg (ORCPT ); Fri, 4 Mar 2016 05:09:36 -0500 Received: from m1.elettra.trieste.it ([140.105.206.201]:58634 "EHLO elettra.eu" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1758357AbcCDKJa (ORCPT ); Fri, 4 Mar 2016 05:09:30 -0500 From: Alessio Igor Bogani To: Scott Wood , Kumar Gala Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org, Alessio Igor Bogani Subject: [PATCH v3 2/3] powerpc/86xx: Update device tree Date: Fri, 4 Mar 2016 11:09:10 +0100 Message-Id: <1457086151-19882-2-git-send-email-alessio.bogani@elettra.eu> X-Mailer: git-send-email 2.7.2 In-Reply-To: <1457086151-19882-1-git-send-email-alessio.bogani@elettra.eu> References: <1457086151-19882-1-git-send-email-alessio.bogani@elettra.eu> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 37715 Lines: 1410 Avoid duplication of the interrupt-parent, migrate to 4 interrupt-cells and set the right clock-frequency for pcie (100 Mhz). Signed-off-by: Alessio Igor Bogani --- arch/powerpc/boot/dts/fsl/gef_ppc9a.dts | 73 ++++++++------------ arch/powerpc/boot/dts/fsl/gef_sbc310.dts | 79 ++++++++------------- arch/powerpc/boot/dts/fsl/gef_sbc610.dts | 73 ++++++++------------ arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts | 95 ++++++++++---------------- arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts | 78 ++++++++------------- arch/powerpc/boot/dts/fsl/sbc8641d.dts | 59 ++++++---------- 6 files changed, 169 insertions(+), 288 deletions(-) diff --git a/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts b/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts index 83eb0fd..7e4487b 100644 --- a/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts +++ b/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts @@ -25,6 +25,7 @@ compatible = "gef,ppc9a"; #address-cells = <1>; #size-cells = <1>; + interrupt-parent = <&mpic>; aliases { ethernet0 = &enet0; @@ -72,8 +73,7 @@ #size-cells = <1>; compatible = "fsl,mpc8641-localbus", "simple-bus"; reg = <0xfef05000 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; + interrupts = <19 2 0 0>; ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash 1 0 0xe8000000 0x08000000 // Paged Flash 0 @@ -150,9 +150,7 @@ interrupt-controller; compatible = "gef,ppc9a-fpga-pic", "gef,fpga-pic-1.00"; reg = <0x4 0x4000 0x20>; - interrupts = <0x8 - 0x9>; - interrupt-parent = <&mpic>; + interrupts = <0x8 0x9 0 0>; }; gef_gpio: gpio@7,14000 { @@ -166,7 +164,6 @@ soc@fef00000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; compatible = "fsl,mpc8641-soc", "simple-bus"; ranges = <0x0 0xfef00000 0x00100000>; @@ -181,17 +178,15 @@ mcm@1000 { compatible = "fsl,mpc8641-mcm", "fsl,mcm"; reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; + interrupts = <17 2 0 0>; }; - i2c1: i2c@3000 { + i2c@3000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl-i2c"; reg = <0x3000 0x100>; - interrupts = <0x2b 0x2>; - interrupt-parent = <&mpic>; + interrupts = <0x2b 0x2 0 0>; dfsrr; hwmon@48 { @@ -215,13 +210,12 @@ }; }; - i2c2: i2c@3100 { + i2c@3100 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl-i2c"; reg = <0x3100 0x100>; - interrupts = <0x2b 0x2>; - interrupt-parent = <&mpic>; + interrupts = <0x2b 0x2 0 0>; dfsrr; }; @@ -237,32 +231,28 @@ "fsl,eloplus-dma-channel"; reg = <0x0 0x80>; cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; + interrupts = <20 2 0 0>; }; dma-channel@80 { compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x80 0x80>; cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; + interrupts = <21 2 0 0>; }; dma-channel@100 { compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x100 0x80>; cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; + interrupts = <22 2 0 0>; }; dma-channel@180 { compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x180 0x80>; cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; + interrupts = <23 2 0 0>; }; }; @@ -276,8 +266,7 @@ reg = <0x24000 0x1000>; ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; + interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>; tbi-handle = <&tbi0>; phy-handle = <&phy0>; phy-connection-type = "gmii"; @@ -315,8 +304,7 @@ reg = <0x26000 0x1000>; ranges = <0x0 0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; + interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>; tbi-handle = <&tbi2>; phy-handle = <&phy2>; phy-connection-type = "gmii"; @@ -340,8 +328,7 @@ compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; - interrupts = <0x2a 0x2>; - interrupt-parent = <&mpic>; + interrupts = <0x2a 0x2 0 0>; }; serial1: serial@4600 { @@ -350,17 +337,16 @@ compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; - interrupts = <0x1c 0x2>; - interrupt-parent = <&mpic>; + interrupts = <0x1c 0x2 0 0>; }; mpic: pic@40000 { clock-frequency = <0>; interrupt-controller; #address-cells = <0>; - #interrupt-cells = <2>; + #interrupt-cells = <4>; reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; + compatible = "fsl,mpic", "chrp,open-pic"; device_type = "open-pic"; }; @@ -369,15 +355,14 @@ reg = <0x41600 0x80>; msi-available-ranges = <0 0x100>; interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; + 0xe0 0 0 0 + 0xe1 0 0 0 + 0xe2 0 0 0 + 0xe3 0 0 0 + 0xe4 0 0 0 + 0xe5 0 0 0 + 0xe6 0 0 0 + 0xe7 0 0 0>; }; global-utilities@e0000 { @@ -390,16 +375,14 @@ pci0: pcie@fef08000 { compatible = "fsl,mpc8641-pcie"; device_type = "pci"; - #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; reg = <0xfef08000 0x1000>; bus-range = <0x0 0xff>; ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <0x18 0x2>; + clock-frequency = <100000000>; + interrupts = <0x18 0x2 0 0>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1 diff --git a/arch/powerpc/boot/dts/fsl/gef_sbc310.dts b/arch/powerpc/boot/dts/fsl/gef_sbc310.dts index d426dd3..1299011 100644 --- a/arch/powerpc/boot/dts/fsl/gef_sbc310.dts +++ b/arch/powerpc/boot/dts/fsl/gef_sbc310.dts @@ -25,6 +25,7 @@ compatible = "gef,sbc310"; #address-cells = <1>; #size-cells = <1>; + interrupt-parent = <&mpic>; aliases { ethernet0 = &enet0; @@ -73,8 +74,7 @@ #size-cells = <1>; compatible = "fsl,mpc8641-localbus", "simple-bus"; reg = <0xfef05000 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; + interrupts = <19 2 0 0>; ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash 1 0 0xe0000000 0x08000000 // Paged Flash 0 @@ -148,9 +148,7 @@ interrupt-controller; compatible = "gef,sbc310-fpga-pic", "gef,fpga-pic"; reg = <0x4 0x4000 0x20>; - interrupts = <0x8 - 0x9>; - interrupt-parent = <&mpic>; + interrupts = <0x8 0x9 0 0>; }; gef_gpio: gpio@4,8000 { @@ -164,7 +162,6 @@ soc@fef00000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; compatible = "fsl,mpc8641-soc", "simple-bus"; ranges = <0x0 0xfef00000 0x00100000>; @@ -179,17 +176,15 @@ mcm@1000 { compatible = "fsl,mpc8641-mcm", "fsl,mcm"; reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; + interrupts = <17 2 0 0>; }; - i2c1: i2c@3000 { + i2c@3000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl-i2c"; reg = <0x3000 0x100>; - interrupts = <0x2b 0x2>; - interrupt-parent = <&mpic>; + interrupts = <0x2b 0x2 0 0>; dfsrr; rtc@51 { @@ -198,13 +193,12 @@ }; }; - i2c2: i2c@3100 { + i2c@3100 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl-i2c"; reg = <0x3100 0x100>; - interrupts = <0x2b 0x2>; - interrupt-parent = <&mpic>; + interrupts = <0x2b 0x2 0 0>; dfsrr; hwmon@48 { @@ -235,32 +229,28 @@ "fsl,eloplus-dma-channel"; reg = <0x0 0x80>; cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; + interrupts = <20 2 0 0>; }; dma-channel@80 { compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x80 0x80>; cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; + interrupts = <21 2 0 0>; }; dma-channel@100 { compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x100 0x80>; cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; + interrupts = <22 2 0 0>; }; dma-channel@180 { compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x180 0x80>; cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; + interrupts = <23 2 0 0>; }; }; @@ -274,8 +264,7 @@ reg = <0x24000 0x1000>; ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; + interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>; tbi-handle = <&tbi0>; phy-handle = <&phy0>; phy-connection-type = "gmii"; @@ -313,8 +302,7 @@ reg = <0x26000 0x1000>; ranges = <0x0 0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; + interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>; tbi-handle = <&tbi2>; phy-handle = <&phy2>; phy-connection-type = "gmii"; @@ -338,8 +326,7 @@ compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; - interrupts = <0x2a 0x2>; - interrupt-parent = <&mpic>; + interrupts = <0x2a 0x2 0 0>; }; serial1: serial@4600 { @@ -348,17 +335,16 @@ compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; - interrupts = <0x1c 0x2>; - interrupt-parent = <&mpic>; + interrupts = <0x1c 0x2 0 0>; }; mpic: pic@40000 { clock-frequency = <0>; interrupt-controller; #address-cells = <0>; - #interrupt-cells = <2>; + #interrupt-cells = <4>; reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; + compatible = "fsl,mpic", "chrp,open-pic"; device_type = "open-pic"; }; @@ -367,15 +353,14 @@ reg = <0x41600 0x80>; msi-available-ranges = <0 0x100>; interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; + 0xe0 0 0 0 + 0xe1 0 0 0 + 0xe2 0 0 0 + 0xe3 0 0 0 + 0xe4 0 0 0 + 0xe5 0 0 0 + 0xe6 0 0 0 + 0xe7 0 0 0>; }; global-utilities@e0000 { @@ -388,16 +373,14 @@ pci0: pcie@fef08000 { compatible = "fsl,mpc8641-pcie"; device_type = "pci"; - #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; reg = <0xfef08000 0x1000>; bus-range = <0x0 0xff>; ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <0x18 0x2>; + clock-frequency = <100000000>; + interrupts = <0x18 0x2 0 0>; interrupt-map-mask = <0xff00 0x0 0x0 0x7>; interrupt-map = < 0x0000 0x0 0x0 0x1 &mpic 0x0 0x2 @@ -424,16 +407,14 @@ pci1: pcie@fef09000 { compatible = "fsl,mpc8641-pcie"; device_type = "pci"; - #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; reg = <0xfef09000 0x1000>; bus-range = <0x0 0xff>; ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000 0x01000000 0x0 0x00000000 0xfe400000 0x0 0x00400000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <0x19 0x2>; + clock-frequency = <100000000>; + interrupts = <0x19 0x2 0 0>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < 0x0000 0x0 0x0 0x1 &mpic 0x4 0x2 diff --git a/arch/powerpc/boot/dts/fsl/gef_sbc610.dts b/arch/powerpc/boot/dts/fsl/gef_sbc610.dts index 5db3399..3a1f438 100644 --- a/arch/powerpc/boot/dts/fsl/gef_sbc610.dts +++ b/arch/powerpc/boot/dts/fsl/gef_sbc610.dts @@ -25,6 +25,7 @@ compatible = "gef,sbc610"; #address-cells = <1>; #size-cells = <1>; + interrupt-parent = <&mpic>; aliases { ethernet0 = &enet0; @@ -72,8 +73,7 @@ #size-cells = <1>; compatible = "fsl,mpc8641-localbus", "simple-bus"; reg = <0xfef05000 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; + interrupts = <19 2 0 0>; ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash 1 0 0xe8000000 0x08000000 // Paged Flash 0 @@ -148,9 +148,7 @@ interrupt-controller; compatible = "gef,fpga-pic"; reg = <0x4 0x4000 0x20>; - interrupts = <0x8 - 0x9>; - interrupt-parent = <&mpic>; + interrupts = <0x8 0x9 0 0>; }; gef_gpio: gpio@7,14000 { @@ -164,7 +162,6 @@ soc@fef00000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; compatible = "simple-bus"; ranges = <0x0 0xfef00000 0x00100000>; @@ -179,17 +176,15 @@ mcm@1000 { compatible = "fsl,mpc8641-mcm", "fsl,mcm"; reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; + interrupts = <17 2 0 0>; }; - i2c1: i2c@3000 { + i2c@3000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl-i2c"; reg = <0x3000 0x100>; - interrupts = <0x2b 0x2>; - interrupt-parent = <&mpic>; + interrupts = <0x2b 0x2 0 0>; dfsrr; hwmon@48 { @@ -213,13 +208,12 @@ }; }; - i2c2: i2c@3100 { + i2c@3100 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl-i2c"; reg = <0x3100 0x100>; - interrupts = <0x2b 0x2>; - interrupt-parent = <&mpic>; + interrupts = <0x2b 0x2 0 0>; dfsrr; }; @@ -235,32 +229,28 @@ "fsl,eloplus-dma-channel"; reg = <0x0 0x80>; cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; + interrupts = <20 2 0 0>; }; dma-channel@80 { compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x80 0x80>; cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; + interrupts = <21 2 0 0>; }; dma-channel@100 { compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x100 0x80>; cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; + interrupts = <22 2 0 0>; }; dma-channel@180 { compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x180 0x80>; cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; + interrupts = <23 2 0 0>; }; }; @@ -274,8 +264,7 @@ reg = <0x24000 0x1000>; ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; + interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>; tbi-handle = <&tbi0>; phy-handle = <&phy0>; phy-connection-type = "gmii"; @@ -313,8 +302,7 @@ reg = <0x26000 0x1000>; ranges = <0x0 0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; + interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>; tbi-handle = <&tbi2>; phy-handle = <&phy2>; phy-connection-type = "gmii"; @@ -338,8 +326,7 @@ compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; - interrupts = <0x2a 0x2>; - interrupt-parent = <&mpic>; + interrupts = <0x2a 0x2 0 0>; }; serial1: serial@4600 { @@ -348,17 +335,16 @@ compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; - interrupts = <0x1c 0x2>; - interrupt-parent = <&mpic>; + interrupts = <0x1c 0x2 0 0>; }; mpic: pic@40000 { clock-frequency = <0>; interrupt-controller; #address-cells = <0>; - #interrupt-cells = <2>; + #interrupt-cells = <4>; reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; + compatible = "fsl,mpic", "chrp,open-pic"; device_type = "open-pic"; }; @@ -367,15 +353,14 @@ reg = <0x41600 0x80>; msi-available-ranges = <0 0x100>; interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; + 0xe0 0 0 0 + 0xe1 0 0 0 + 0xe2 0 0 0 + 0xe3 0 0 0 + 0xe4 0 0 0 + 0xe5 0 0 0 + 0xe6 0 0 0 + 0xe7 0 0 0>; }; global-utilities@e0000 { @@ -388,16 +373,14 @@ pci0: pcie@fef08000 { compatible = "fsl,mpc8641-pcie"; device_type = "pci"; - #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; reg = <0xfef08000 0x1000>; bus-range = <0x0 0xff>; ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <0x18 0x2>; + clock-frequency = <100000000>; + interrupts = <0x18 0x2 0 0>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1 diff --git a/arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts index 1c03060..03ef3f7 100644 --- a/arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts @@ -16,6 +16,7 @@ compatible = "fsl,mpc8641hpcn"; #address-cells = <1>; #size-cells = <1>; + interrupt-parent = <&mpic>; aliases { ethernet0 = &enet0; @@ -66,8 +67,7 @@ #size-cells = <1>; compatible = "fsl,mpc8641-localbus", "simple-bus"; reg = <0xffe05000 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; + interrupts = <19 2 0 0>; ranges = <0 0 0xef800000 0x00800000 2 0 0xffdf8000 0x00008000 @@ -118,8 +118,7 @@ mcm@1000 { compatible = "fsl,mpc8641-mcm", "fsl,mcm"; reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; + interrupts = <17 2 0 0>; }; i2c@3000 { @@ -128,8 +127,7 @@ cell-index = <0>; compatible = "fsl-i2c"; reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; + interrupts = <43 2 0 0>; dfsrr; }; @@ -139,8 +137,7 @@ cell-index = <1>; compatible = "fsl-i2c"; reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; + interrupts = <43 2 0 0>; dfsrr; }; @@ -156,32 +153,28 @@ "fsl,eloplus-dma-channel"; reg = <0x0 0x80>; cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; + interrupts = <20 2 0 0>; }; dma-channel@80 { compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x80 0x80>; cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; + interrupts = <21 2 0 0>; }; dma-channel@100 { compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x100 0x80>; cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; + interrupts = <22 2 0 0>; }; dma-channel@180 { compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x180 0x80>; cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; + interrupts = <23 2 0 0>; }; }; @@ -195,8 +188,7 @@ reg = <0x24000 0x1000>; ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; + interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>; tbi-handle = <&tbi0>; phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; @@ -208,23 +200,19 @@ reg = <0x520 0x20>; phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; + interrupts = <10 1 0 0>; reg = <0>; }; phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; + interrupts = <10 1 0 0>; reg = <1>; }; phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; + interrupts = <10 1 0 0>; reg = <2>; }; phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; + interrupts = <10 1 0 0>; reg = <3>; }; tbi0: tbi-phy@11 { @@ -244,8 +232,7 @@ reg = <0x25000 0x1000>; ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 2 36 2 40 2>; - interrupt-parent = <&mpic>; + interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>; tbi-handle = <&tbi1>; phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; @@ -273,8 +260,7 @@ reg = <0x26000 0x1000>; ranges = <0x0 0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; + interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>; tbi-handle = <&tbi2>; phy-handle = <&phy2>; phy-connection-type = "rgmii-id"; @@ -302,8 +288,7 @@ reg = <0x27000 0x1000>; ranges = <0x0 0x27000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <37 2 38 2 39 2>; - interrupt-parent = <&mpic>; + interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>; tbi-handle = <&tbi3>; phy-handle = <&phy3>; phy-connection-type = "rgmii-id"; @@ -327,8 +312,7 @@ compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; + interrupts = <42 2 0 0>; }; serial1: serial@4600 { @@ -337,16 +321,15 @@ compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; - interrupts = <28 2>; - interrupt-parent = <&mpic>; + interrupts = <28 2 0 0>; }; mpic: pic@40000 { interrupt-controller; #address-cells = <0>; - #interrupt-cells = <2>; + #interrupt-cells = <4>; reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; + compatible = "fsl,mpic", "chrp,open-pic"; device_type = "open-pic"; }; @@ -361,27 +344,27 @@ compatible = "fsl,srio-msg-unit"; reg = <0x0 0x100>; interrupts = < - 53 2 /* msg1_tx_irq */ - 54 2>;/* msg1_rx_irq */ + 53 2 0 0 /* msg1_tx_irq */ + 54 2 0 0>;/* msg1_rx_irq */ }; message-unit@100 { compatible = "fsl,srio-msg-unit"; reg = <0x100 0x100>; interrupts = < - 55 2 /* msg2_tx_irq */ - 56 2>;/* msg2_rx_irq */ + 55 2 0 0 /* msg2_tx_irq */ + 56 2 0 0>;/* msg2_rx_irq */ }; doorbell-unit@400 { compatible = "fsl,srio-dbell-unit"; reg = <0x400 0x80>; interrupts = < - 49 2 /* bell_outb_irq */ - 50 2>;/* bell_inb_irq */ + 49 2 0 0 /* bell_outb_irq */ + 50 2 0 0>;/* bell_inb_irq */ }; port-write-unit@4e0 { compatible = "fsl,srio-port-write-unit"; reg = <0x4e0 0x20>; - interrupts = <48 2>; + interrupts = <48 2 0 0>; }; }; @@ -395,16 +378,14 @@ pci0: pcie@ffe08000 { compatible = "fsl,mpc8641-pcie"; device_type = "pci"; - #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; reg = <0xffe08000 0x1000>; bus-range = <0x0 0xff>; ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000 0x01000000 0x0 0x00000000 0xffc00000 0x0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <24 2>; + clock-frequency = <100000000>; + interrupts = <24 2 0 0>; interrupt-map-mask = <0xff00 0 0 7>; interrupt-map = < /* IDSEL 0x11 func 0 - PCI slot 1 */ @@ -545,7 +526,6 @@ 0x0 0x00010000>; isa@1e { device_type = "isa"; - #interrupt-cells = <2>; #size-cells = <1>; #address-cells = <2>; reg = <0xf000 0 0 0 0>; @@ -562,8 +542,7 @@ #address-cells = <0>; #interrupt-cells = <2>; compatible = "chrp,iic"; - interrupts = <9 2>; - interrupt-parent = <&mpic>; + interrupts = <9 2 0 0>; }; i8042@60 { @@ -571,8 +550,7 @@ #address-cells = <1>; reg = <1 0x60 1 1 0x64 1>; interrupts = <1 3 12 3>; - interrupt-parent = - <&i8259>; + interrupt-parent = <&i8259>; keyboard@0 { reg = <0>; @@ -603,16 +581,14 @@ pci1: pcie@ffe09000 { compatible = "fsl,mpc8641-pcie"; device_type = "pci"; - #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; reg = <0xffe09000 0x1000>; bus-range = <0 0xff>; ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 0x01000000 0x0 0x00000000 0xffc10000 0x0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <25 2>; + clock-frequency = <100000000>; + interrupts = <25 2 0 0>; interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = < /* IDSEL 0x0 */ @@ -644,8 +620,7 @@ rapidio@ffec0000 { reg = <0xffec0000 0x11000>; compatible = "fsl,srio"; - interrupt-parent = <&mpic>; - interrupts = <48 2>; + interrupts = <48 2 0 0>; #address-cells = <2>; #size-cells = <2>; fsl,srio-rmu-handle = <&rmu>; diff --git a/arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts index bb575e2..0a2c21f 100644 --- a/arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts +++ b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts @@ -16,6 +16,7 @@ compatible = "fsl,mpc8641hpcn"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&mpic>; aliases { ethernet0 = &enet0; @@ -66,8 +67,7 @@ #size-cells = <1>; compatible = "fsl,mpc8641-localbus", "simple-bus"; reg = <0x0f 0xffe05000 0x0 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; + interrupts = <19 2 0 0>; ranges = <0 0 0xf 0xef800000 0x00800000 2 0 0xf 0xffdf8000 0x00008000 @@ -118,8 +118,7 @@ mcm@1000 { compatible = "fsl,mpc8641-mcm", "fsl,mcm"; reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; + interrupts = <17 2 0 0>; }; i2c@3000 { @@ -128,8 +127,7 @@ cell-index = <0>; compatible = "fsl-i2c"; reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; + interrupts = <43 2 0 0>; dfsrr; }; @@ -139,8 +137,7 @@ cell-index = <1>; compatible = "fsl-i2c"; reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; + interrupts = <43 2 0 0>; dfsrr; }; @@ -156,32 +153,28 @@ "fsl,eloplus-dma-channel"; reg = <0x0 0x80>; cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; + interrupts = <20 2 0 0>; }; dma-channel@80 { compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x80 0x80>; cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; + interrupts = <21 2 0 0>; }; dma-channel@100 { compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x100 0x80>; cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; + interrupts = <22 2 0 0>; }; dma-channel@180 { compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x180 0x80>; cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; + interrupts = <23 2 0 0>; }; }; @@ -195,8 +188,7 @@ reg = <0x24000 0x1000>; ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; + interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>; tbi-handle = <&tbi0>; phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; @@ -208,23 +200,19 @@ reg = <0x520 0x20>; phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; + interrupts = <10 1 0 0>; reg = <0>; }; phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; + interrupts = <10 1 0 0>; reg = <1>; }; phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; + interrupts = <10 1 0 0>; reg = <2>; }; phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; + interrupts = <10 1 0 0>; reg = <3>; }; tbi0: tbi-phy@11 { @@ -244,8 +232,7 @@ reg = <0x25000 0x1000>; ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 2 36 2 40 2>; - interrupt-parent = <&mpic>; + interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>; tbi-handle = <&tbi1>; phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; @@ -273,8 +260,7 @@ reg = <0x26000 0x1000>; ranges = <0x0 0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; + interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>; tbi-handle = <&tbi2>; phy-handle = <&phy2>; phy-connection-type = "rgmii-id"; @@ -302,8 +288,7 @@ reg = <0x27000 0x1000>; ranges = <0x0 0x27000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <37 2 38 2 39 2>; - interrupt-parent = <&mpic>; + interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>; tbi-handle = <&tbi3>; phy-handle = <&phy3>; phy-connection-type = "rgmii-id"; @@ -327,8 +312,7 @@ compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; + interrupts = <42 2 0 0>; }; serial1: serial@4600 { @@ -337,16 +321,15 @@ compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; - interrupts = <28 2>; - interrupt-parent = <&mpic>; + interrupts = <28 2 0 0>; }; mpic: pic@40000 { interrupt-controller; #address-cells = <0>; - #interrupt-cells = <2>; + #interrupt-cells = <4>; reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; + compatible = "fsl,mpic", "chrp,open-pic"; device_type = "open-pic"; }; @@ -361,16 +344,14 @@ cell-index = <0>; compatible = "fsl,mpc8641-pcie"; device_type = "pci"; - #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; reg = <0x0f 0xffe08000 0x0 0x1000>; bus-range = <0x0 0xff>; ranges = <0x02000000 0x0 0xe0000000 0x0c 0x00000000 0x0 0x20000000 0x01000000 0x0 0x00000000 0x0f 0xffc00000 0x0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <24 2>; + clock-frequency = <100000000>; + interrupts = <24 2 0 0>; interrupt-map-mask = <0xff00 0 0 7>; interrupt-map = < /* IDSEL 0x11 func 0 - PCI slot 1 */ @@ -511,7 +492,6 @@ 0x0 0x00010000>; isa@1e { device_type = "isa"; - #interrupt-cells = <2>; #size-cells = <1>; #address-cells = <2>; reg = <0xf000 0 0 0 0>; @@ -528,8 +508,7 @@ #address-cells = <0>; #interrupt-cells = <2>; compatible = "chrp,iic"; - interrupts = <9 2>; - interrupt-parent = <&mpic>; + interrupts = <9 2 0 0>; }; i8042@60 { @@ -537,8 +516,7 @@ #address-cells = <1>; reg = <1 0x60 1 1 0x64 1>; interrupts = <1 3 12 3>; - interrupt-parent = - <&i8259>; + interrupt-parent = <&i8259>; keyboard@0 { reg = <0>; @@ -570,16 +548,14 @@ cell-index = <1>; compatible = "fsl,mpc8641-pcie"; device_type = "pci"; - #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; reg = <0x0f 0xffe09000 0x0 0x1000>; bus-range = <0x0 0xff>; ranges = <0x02000000 0x0 0xe0000000 0x0c 0x20000000 0x0 0x20000000 0x01000000 0x0 0x00000000 0x0f 0xffc10000 0x0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <25 2>; + clock-frequency = <100000000>; + interrupts = <25 2 0 0>; interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = < /* IDSEL 0x0 */ diff --git a/arch/powerpc/boot/dts/fsl/sbc8641d.dts b/arch/powerpc/boot/dts/fsl/sbc8641d.dts index 68f0ed7..47c83a0 100644 --- a/arch/powerpc/boot/dts/fsl/sbc8641d.dts +++ b/arch/powerpc/boot/dts/fsl/sbc8641d.dts @@ -20,6 +20,7 @@ compatible = "wind,sbc8641"; #address-cells = <1>; #size-cells = <1>; + interrupt-parent = <&mpic>; aliases { ethernet0 = &enet0; @@ -70,8 +71,7 @@ #size-cells = <1>; compatible = "fsl,mpc8641-localbus", "simple-bus"; reg = <0xf8005000 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; + interrupts = <19 2 0 0>; ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash 1 0 0xf0000000 0x00010000 // 64KB EEPROM @@ -137,8 +137,7 @@ mcm@1000 { compatible = "fsl,mpc8641-mcm", "fsl,mcm"; reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; + interrupts = <17 2 0 0>; }; i2c@3000 { @@ -147,8 +146,7 @@ cell-index = <0>; compatible = "fsl-i2c"; reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; + interrupts = <43 2 0 0>; dfsrr; }; @@ -158,8 +156,7 @@ cell-index = <1>; compatible = "fsl-i2c"; reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; + interrupts = <43 2 0 0>; dfsrr; }; @@ -175,32 +172,28 @@ "fsl,eloplus-dma-channel"; reg = <0x0 0x80>; cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; + interrupts = <20 2 0 0>; }; dma-channel@80 { compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x80 0x80>; cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; + interrupts = <21 2 0 0>; }; dma-channel@100 { compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x100 0x80>; cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; + interrupts = <22 2 0 0>; }; dma-channel@180 { compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x180 0x80>; cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; + interrupts = <23 2 0 0>; }; }; @@ -214,8 +207,7 @@ reg = <0x24000 0x1000>; ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; + interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>; tbi-handle = <&tbi0>; phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; @@ -255,8 +247,7 @@ reg = <0x25000 0x1000>; ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 2 36 2 40 2>; - interrupt-parent = <&mpic>; + interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>; tbi-handle = <&tbi1>; phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; @@ -284,8 +275,7 @@ reg = <0x26000 0x1000>; ranges = <0x0 0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; + interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>; tbi-handle = <&tbi2>; phy-handle = <&phy2>; phy-connection-type = "rgmii-id"; @@ -313,8 +303,7 @@ reg = <0x27000 0x1000>; ranges = <0x0 0x27000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <37 2 38 2 39 2>; - interrupt-parent = <&mpic>; + interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>; tbi-handle = <&tbi3>; phy-handle = <&phy3>; phy-connection-type = "rgmii-id"; @@ -338,8 +327,7 @@ compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; + interrupts = <42 2 0 0>; }; serial1: serial@4600 { @@ -348,17 +336,16 @@ compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; - interrupts = <28 2>; - interrupt-parent = <&mpic>; + interrupts = <28 2 0 0>; }; mpic: pic@40000 { clock-frequency = <0>; interrupt-controller; #address-cells = <0>; - #interrupt-cells = <2>; + #interrupt-cells = <4>; reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; + compatible = "fsl,mpic", "chrp,open-pic"; device_type = "open-pic"; big-endian; }; @@ -373,16 +360,14 @@ pci0: pcie@f8008000 { compatible = "fsl,mpc8641-pcie"; device_type = "pci"; - #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; reg = <0xf8008000 0x1000>; bus-range = <0x0 0xff>; ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <24 2>; + clock-frequency = <100000000>; + interrupts = <24 2 0 0>; interrupt-map-mask = <0xff00 0 0 7>; interrupt-map = < /* IDSEL 0x0 */ @@ -411,16 +396,14 @@ pci1: pcie@f8009000 { compatible = "fsl,mpc8641-pcie"; device_type = "pci"; - #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; reg = <0xf8009000 0x1000>; bus-range = <0 0xff>; ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <25 2>; + clock-frequency = <100000000>; + interrupts = <25 2 0 0>; interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = < /* IDSEL 0x0 */ -- 2.7.2