Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758935AbcCDKXz (ORCPT ); Fri, 4 Mar 2016 05:23:55 -0500 Received: from 5520-maca-inet1-outside.broadcom.com ([216.31.211.11]:51410 "EHLO mail-irv-18.broadcom.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756532AbcCDKXv (ORCPT ); Fri, 4 Mar 2016 05:23:51 -0500 From: Yendapally Reddy Dhananjaya Reddy To: Florian Fainelli , Ray Jui , Scott Branden , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Catalin Marinas , Will Deacon , devicetree@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Yendapally Reddy Dhananjaya Reddy Subject: [PATCH 1/1] arm64: dts: Enable GPIO for Broadcom NS2 SoC Date: Fri, 4 Mar 2016 05:23:30 -0500 Message-Id: <1457087010-26306-1-git-send-email-yendapally.reddy@broadcom.com> X-Mailer: git-send-email 2.1.0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1186 Lines: 46 This enables the GPIO support for Broadcom NS2 SoC Signed-off-by: Yendapally Reddy Dhananjaya Reddy --- arch/arm64/boot/dts/broadcom/ns2.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi index a510d3a..dbe89d7 100644 --- a/arch/arm64/boot/dts/broadcom/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi @@ -246,6 +246,15 @@ mask = <0xfffffffd>; }; + gpio_aon: gpio@65024800 { + compatible = "brcm,iproc-gpio"; + reg = <0x65024800 0x50>, + <0x65024008 0x18>; + ngpios = <6>; + #gpio-cells = <2>; + gpio-controller; + }; + gic: interrupt-controller@65210000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -266,6 +275,16 @@ status = "disabled"; }; + gpio_g: gpio@660a0000 { + compatible = "brcm,iproc-gpio"; + reg = <0x660a0000 0x50>; + ngpios = <32>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + interrupts = ; + }; + i2c1: i2c@660b0000 { compatible = "brcm,iproc-i2c"; reg = <0x660b0000 0x100>; -- 2.1.0