Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1759571AbcCDRXA (ORCPT ); Fri, 4 Mar 2016 12:23:00 -0500 Received: from us01smtprelay-2.synopsys.com ([198.182.60.111]:36792 "EHLO smtprelay.synopsys.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757489AbcCDRVw (ORCPT ); Fri, 4 Mar 2016 12:21:52 -0500 From: Joao Pinto To: vinholikatti@gmail.com, julian.calaby@gmail.com, akinobu.mita@gmail.com, hch@infradead.org, arnd@arndb.de, mark.rutland@arm.com Cc: gbroner@codeaurora.org, subhashj@codeaurora.org, CARLOS.PALMINHA@synopsys.com, ijc+devicetree@hellion.org.uk, linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org, devicetree@vger.kernel.org, Joao Pinto Subject: [PATCH v10 3/6] added support for DesignWare Controller Date: Fri, 4 Mar 2016 17:22:16 +0000 Message-Id: X-Mailer: git-send-email 1.8.1.5 In-Reply-To: References: In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 13499 Lines: 427 This patch has the goal to add support for DesignWare UFS Controller specific operations. Signed-off-by: Joao Pinto --- Changes v9->v10 (Arnd Bergmann): - Patch now only has DWC controller specific code - Added custom_phy_initialization callback for PHY specific code Changes v8->v9 (Robert Herring): - drop 0x in the node declaration - most specific compatibility string declared first Changes v7->v8 (Akinobu Mita): - DME sets were simplified for easier reading - CLK DIV default values definitions names were changed to match the register's name - New line added to dev_err and dev_info statements Changes v6->v7 (Arnd Bergmann): - Changed DT node name (to ufs only) and the memory address (to 0xd000000) - Removed CONFIG_PM from the PCI glue driver (pm.h already does this) - No other changes are necessary in ufshcd.c because of the link up notify function usage (it is simpler now) - Removed the PHY mentioning since the Test Chip is not a real PHY for real world usage, since it is a test chip for prototyping with a very specific usage - Added again the Test Chip 20-bit option Changes v5->v6: - Patch bad format fixed Changes v4->v5 (Akinobu Mita): - All functions used only locally in ufshcd-dwc are now declared as static - ufshcd_dwc_configuration() was removed in ufshcd-dwc and a notify function (ufshcd_dwc_link_startup_notify) was created to deal with the DWC specific init routines - 20-bit RMMI option was removed from Kconfig. Now if MPHY TC is selected and 40-bit is not then it assumes a 20-bit config Changes v3->v4 (Arnd Bergmann and Mark Rutland): - SCSI_UFS_DWC_HOOKS is now silent and selected by the SCSI_UFS_DWC_PLAT or SCSI_UFS_DWC_PCI - Compatibility string has the ufs core version for info purposes since the driver is capable of getting the controller version from its registers - Created ufs-dwc-pci glue driver with specific DWC data - MPHY configuration remains in the ufshcd-dwc since it is unipro attribute writting only not following the a linux phy framework logic Changes v2->v3 (Julian Calaby): - Implement a common DWC code to be used by the platform and pci glue drivers - Synopsys ID & Class added to the existing pci driver and specific DWC was also added to the pci driver Changes v1->v2 (Akinobu Mita): - Implement a platform driver that uses the existing UFS core driver - Add DWC specific code to the existing UFS core driver MAINTAINERS | 6 ++ drivers/scsi/ufs/Kconfig | 3 + drivers/scsi/ufs/Makefile | 1 + drivers/scsi/ufs/ufshcd-dwc.c | 150 ++++++++++++++++++++++++++++++++++++++++++ drivers/scsi/ufs/ufshcd-dwc.h | 26 ++++++++ drivers/scsi/ufs/ufshcd.h | 2 + drivers/scsi/ufs/ufshci-dwc.h | 42 ++++++++++++ drivers/scsi/ufs/unipro.h | 39 +++++++++++ 8 files changed, 269 insertions(+) create mode 100644 drivers/scsi/ufs/ufshcd-dwc.c create mode 100644 drivers/scsi/ufs/ufshcd-dwc.h create mode 100644 drivers/scsi/ufs/ufshci-dwc.h diff --git a/MAINTAINERS b/MAINTAINERS index d2f94e2..3db3c4c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11006,6 +11006,12 @@ S: Supported F: Documentation/scsi/ufs.txt F: drivers/scsi/ufs/ +UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER DWC HOOKS +M: Joao Pinto +L: linux-scsi@vger.kernel.org +S: Supported +F: drivers/scsi/ufs/*dwc* + UNSORTED BLOCK IMAGES (UBI) M: Artem Bityutskiy M: Richard Weinberger diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig index 5f45307..647c324 100644 --- a/drivers/scsi/ufs/Kconfig +++ b/drivers/scsi/ufs/Kconfig @@ -83,3 +83,6 @@ config SCSI_UFS_QCOM Select this if you have UFS controller on QCOM chipset. If unsure, say N. + +config SCSI_UFS_DWC + bool diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile index 8303bcc..ccbad53 100644 --- a/drivers/scsi/ufs/Makefile +++ b/drivers/scsi/ufs/Makefile @@ -1,4 +1,5 @@ # UFSHCD makefile +obj-$(CONFIG_SCSI_UFS_DWC) += ufshcd-dwc.o obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o diff --git a/drivers/scsi/ufs/ufshcd-dwc.c b/drivers/scsi/ufs/ufshcd-dwc.c new file mode 100644 index 0000000..c1b8a7f --- /dev/null +++ b/drivers/scsi/ufs/ufshcd-dwc.c @@ -0,0 +1,150 @@ +/* + * UFS Host driver for Synopsys Designware Core + * + * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com) + * + * Authors: Joao Pinto + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "ufshcd.h" +#include "unipro.h" + +#include "ufshcd-dwc.h" +#include "ufshci-dwc.h" + +int ufshcd_dwc_dme_set_attrs(struct ufs_hba *hba, + const struct ufshcd_dme_attr_val *v, int n) +{ + int ret = 0; + int attr_node = 0; + + for (attr_node = 0; attr_node < n; attr_node++) { + ret = ufshcd_dme_set_attr(hba, v[attr_node].attr_sel, + ATTR_SET_NOR, v[attr_node].mib_val, v[attr_node].peer); + + if (ret) + return ret; + } + + return 0; +} +EXPORT_SYMBOL(ufshcd_dwc_dme_set_attrs); + +/** + * ufshcd_dwc_program_clk_div() + * This function programs the clk divider value. This value is needed to + * provide 1 microsecond tick to unipro layer. + * @hba: Private Structure pointer + * @divider_val: clock divider value to be programmed + * + */ +static void ufshcd_dwc_program_clk_div(struct ufs_hba *hba, u32 divider_val) +{ + ufshcd_writel(hba, divider_val, DWC_UFS_REG_HCLKDIV); +} + +/** + * ufshcd_dwc_link_is_up() + * Check if link is up + * @hba: private structure poitner + * + * Returns 0 on success, non-zero value on failure + */ +static int ufshcd_dwc_link_is_up(struct ufs_hba *hba) +{ + int dme_result = 0; + + ufshcd_dme_get(hba, UIC_ARG_MIB(VS_POWERSTATE), &dme_result); + + if (dme_result == UFSHCD_LINK_IS_UP) { + ufshcd_set_link_active(hba); + return 0; + } + + return 1; +} + +/** + * ufshcd_dwc_connection_setup() + * This function configures both the local side (host) and the peer side + * (device) unipro attributes to establish the connection to application/ + * cport. + * This function is not required if the hardware is properly configured to + * have this connection setup on reset. But invoking this function does no + * harm and should be fine even working with any ufs device. + * + * @hba: pointer to drivers private data + * + * Returns 0 on success non-zero value on failure + */ +static int ufshcd_dwc_connection_setup(struct ufs_hba *hba) +{ + const struct ufshcd_dme_attr_val setup_attrs[] = { + { UIC_ARG_MIB(T_CONNECTIONSTATE), 0, DME_LOCAL }, + { UIC_ARG_MIB(N_DEVICEID), 0, DME_LOCAL }, + { UIC_ARG_MIB(N_DEVICEID_VALID), 0, DME_LOCAL }, + { UIC_ARG_MIB(T_PEERDEVICEID), 1, DME_LOCAL }, + { UIC_ARG_MIB(T_PEERCPORTID), 0, DME_LOCAL }, + { UIC_ARG_MIB(T_TRAFFICCLASS), 0, DME_LOCAL }, + { UIC_ARG_MIB(T_CPORTFLAGS), 0x6, DME_LOCAL }, + { UIC_ARG_MIB(T_CPORTMODE), 1, DME_LOCAL }, + { UIC_ARG_MIB(T_CONNECTIONSTATE), 1, DME_LOCAL }, + { UIC_ARG_MIB(T_CONNECTIONSTATE), 0, DME_PEER }, + { UIC_ARG_MIB(N_DEVICEID), 1, DME_PEER }, + { UIC_ARG_MIB(N_DEVICEID_VALID), 1, DME_PEER }, + { UIC_ARG_MIB(T_PEERDEVICEID), 1, DME_PEER }, + { UIC_ARG_MIB(T_PEERCPORTID), 0, DME_PEER }, + { UIC_ARG_MIB(T_TRAFFICCLASS), 0, DME_PEER }, + { UIC_ARG_MIB(T_CPORTFLAGS), 0x6, DME_PEER }, + { UIC_ARG_MIB(T_CPORTMODE), 1, DME_PEER }, + { UIC_ARG_MIB(T_CONNECTIONSTATE), 1, DME_PEER } + }; + + return ufshcd_dwc_dme_set_attrs(hba, setup_attrs, ARRAY_SIZE(setup_attrs)); +} + +/** + * ufshcd_dwc_link_startup_notify() + * UFS Host DWC specific link startup sequence + * @hba: private structure poitner + * @status: Callback notify status + * + * Returns 0 on success, non-zero value on failure + */ +int ufshcd_dwc_link_startup_notify(struct ufs_hba *hba, + enum ufs_notify_change_status status) +{ + int err = 0; + + if (status == PRE_CHANGE) { + ufshcd_dwc_program_clk_div(hba, DWC_UFS_REG_HCLKDIV_DIV_125); + + if (hba->vops->custom_phy_initialization) { + err = hba->vops->custom_phy_initialization(hba); + if (err) { + dev_err(hba->dev, "Phy setup failed (%d)\n", + err); + goto out; + } + } + } else { /* POST_CHANGE */ + err = ufshcd_dwc_link_is_up(hba); + if (err) { + dev_err(hba->dev, "Link is not up\n"); + goto out; + } + + err = ufshcd_dwc_connection_setup(hba); + if (err) + dev_err(hba->dev, "Connection setup failed (%d)\n", + err); + } + +out: + return err; +} +EXPORT_SYMBOL(ufshcd_dwc_link_startup_notify); diff --git a/drivers/scsi/ufs/ufshcd-dwc.h b/drivers/scsi/ufs/ufshcd-dwc.h new file mode 100644 index 0000000..c8be295 --- /dev/null +++ b/drivers/scsi/ufs/ufshcd-dwc.h @@ -0,0 +1,26 @@ +/* + * UFS Host driver for Synopsys Designware Core + * + * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com) + * + * Authors: Joao Pinto + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _UFSHCD_DWC_H +#define _UFSHCD_DWC_H + +struct ufshcd_dme_attr_val { + u32 attr_sel; + u32 mib_val; + u8 peer; +}; + +int ufshcd_dwc_link_startup_notify(struct ufs_hba *hba, + enum ufs_notify_change_status status); +int ufshcd_dwc_dme_set_attrs(struct ufs_hba *hba, + const struct ufshcd_dme_attr_val *v, int n); +#endif /* End of Header */ diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index 2570d94..8b0cdf0 100644 --- a/drivers/scsi/ufs/ufshcd.h +++ b/drivers/scsi/ufs/ufshcd.h @@ -262,6 +262,7 @@ struct ufs_pwr_mode_info { * @suspend: called during host controller PM callback * @resume: called during host controller PM callback * @dbg_register_dump: used to dump controller debug information + * @custom_phy_initialization: used to initialize phys in DWC Cores */ struct ufs_hba_variant_ops { const char *name; @@ -283,6 +284,7 @@ struct ufs_hba_variant_ops { int (*suspend)(struct ufs_hba *, enum ufs_pm_op); int (*resume)(struct ufs_hba *, enum ufs_pm_op); void (*dbg_register_dump)(struct ufs_hba *hba); + int (*custom_phy_initialization)(struct ufs_hba *); }; /* clock gating state */ diff --git a/drivers/scsi/ufs/ufshci-dwc.h b/drivers/scsi/ufs/ufshci-dwc.h new file mode 100644 index 0000000..947a75c --- /dev/null +++ b/drivers/scsi/ufs/ufshci-dwc.h @@ -0,0 +1,42 @@ +/* + * UFS Host driver for Synopsys Designware Core + * + * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com) + * + * Authors: Joao Pinto + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _UFSHCI_DWC_H +#define _UFSHCI_DWC_H + +/* DWC HC UFSHCI specific Registers */ +enum dwc_specific_registers { + DWC_UFS_REG_HCLKDIV = 0xFC, +}; + +/* Link Status*/ +enum link_status { + UFSHCD_LINK_IS_DOWN = 1, + UFSHCD_LINK_IS_UP = 2, +}; + +/* Clock Divider Values: Hex equivalent of frequency in MHz */ +enum clk_div_values { + DWC_UFS_REG_HCLKDIV_DIV_62_5 = 0x3e, + DWC_UFS_REG_HCLKDIV_DIV_125 = 0x7d, + DWC_UFS_REG_HCLKDIV_DIV_200 = 0xc8, +}; + +/* Selector Index */ +enum selector_index { + SELIND_LN0_TX = 0x00, + SELIND_LN1_TX = 0x01, + SELIND_LN0_RX = 0x04, + SELIND_LN1_RX = 0x05, +}; + +#endif /* End of Header */ diff --git a/drivers/scsi/ufs/unipro.h b/drivers/scsi/ufs/unipro.h index 816a8a4..da16254 100644 --- a/drivers/scsi/ufs/unipro.h +++ b/drivers/scsi/ufs/unipro.h @@ -35,6 +35,10 @@ #define TX_LCC_SEQUENCER 0x0032 #define TX_MIN_ACTIVATETIME 0x0033 #define TX_PWM_G6_G7_SYNC_LENGTH 0x0034 +#define TX_REFCLKFREQ 0x00EB +#define TX_CFGCLKFREQVAL 0x00EC +#define CFGEXTRATTR 0x00F0 +#define DITHERCTRL2 0x00F1 /* * M-RX Configuration Attributes @@ -48,8 +52,38 @@ #define RX_ENTER_HIBERN8 0x00A7 #define RX_BYPASS_8B10B_ENABLE 0x00A8 #define RX_TERMINATION_FORCE_ENABLE 0x0089 +#define RX_REFCLKFREQ 0x00EB +#define RX_CFGCLKFREQVAL 0x00EC +#define CFGWIDEINLN 0x00F0 +#define CFGRXCDR8 0x00BA +#define ENARXDIRECTCFG4 0x00F2 +#define CFGRXOVR8 0x00BD +#define RXDIRECTCTRL2 0x00C7 +#define ENARXDIRECTCFG3 0x00F3 +#define RXCALCTRL 0x00B4 +#define ENARXDIRECTCFG2 0x00F4 +#define CFGRXOVR4 0x00E9 +#define RXSQCTRL 0x00B5 +#define CFGRXOVR6 0x00BF #define is_mphy_tx_attr(attr) (attr < RX_MODE) + +/* + * Common Block Attributes + */ +#define TX_GLOBALHIBERNATE UNIPRO_CB_OFFSET(0x002B) +#define REFCLKMODE UNIPRO_CB_OFFSET(0x00BF) +#define DIRECTCTRL19 UNIPRO_CB_OFFSET(0x00CD) +#define DIRECTCTRL10 UNIPRO_CB_OFFSET(0x00E6) +#define CDIRECTCTRL6 UNIPRO_CB_OFFSET(0x00EA) +#define RTOBSERVESELECT UNIPRO_CB_OFFSET(0x00F0) +#define CBDIVFACTOR UNIPRO_CB_OFFSET(0x00F1) +#define CBDCOCTRL5 UNIPRO_CB_OFFSET(0x00F3) +#define CBPRGPLL2 UNIPRO_CB_OFFSET(0x00F8) +#define CBPRGTUNING UNIPRO_CB_OFFSET(0x00FB) + +#define UNIPRO_CB_OFFSET(x) (0x8000 | x) + /* * PHY Adpater attributes */ @@ -110,6 +144,11 @@ #define PA_STALLNOCONFIGTIME 0x15A3 #define PA_SAVECONFIGTIME 0x15A4 +/*Other attributes*/ +#define VS_MPHYCFGUPDT 0xD085 +#define VS_DEBUGOMC 0xD09E +#define VS_POWERSTATE 0xD083 + /* PA power modes */ enum { FAST_MODE = 1, -- 1.8.1.5