Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753909AbcCIUbX (ORCPT ); Wed, 9 Mar 2016 15:31:23 -0500 Received: from plane.gmane.org ([80.91.229.3]:37951 "EHLO plane.gmane.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753847AbcCIUbR (ORCPT ); Wed, 9 Mar 2016 15:31:17 -0500 X-Injected-Via-Gmane: http://gmane.org/ To: linux-kernel@vger.kernel.org From: Jean-Denis Girard Subject: Re: [ANNOUNCE] v4.4.4-rt11 Date: Wed, 9 Mar 2016 10:31:06 -1000 Message-ID: References: <20160309135142.GF10517@linutronix.de> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8bit X-Complaints-To: usenet@ger.gmane.org X-Gmane-NNTP-Posting-Host: 255.69.50.123.dsl.dyn.mana.pf User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101 Thunderbird/38.6.0 In-Reply-To: <20160309135142.GF10517@linutronix.de> Cc: linux-rt-users@vger.kernel.org Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2180 Lines: 53 Hi, Le 09/03/2016 03:51, Sebastian Andrzej Siewior a écrit : > - AT91 got a little better. A larger patch series by Boris Brezillon has > been merged. That means SAMA5 boots now. There is one warning left > about invoking free_irq() twice. I would be glad about some feedback > from pre-SAMA5 SoC. Those which share UART and timer interrupt. It > seems that that one I have here does not do this anymore. > > - A patch on top the AT91 series to avoid two warning while switching > from period to oneshow mode. I got this warning when booting my arietta G25: clocksource: pit: mask: 0xfffffff max_cycles: 0xfffffff, max_idle_ns: 14334453866 ns ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/irq/manage.c:1541 __free_irq+0xb0/0x2b0() Trying to free already-free IRQ 16 Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.4-rt11 #1 Hardware name: Atmel AT91SAM9 [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (warn_slowpath_common+0x80/0xa8) [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x2c/0x3c) [] (warn_slowpath_fmt) from [] (__free_irq+0xb0/0x2b0) [] (__free_irq) from [] (free_irq+0x40/0x50) [] (free_irq) from [] (pit_clkevt_shutdown+0x24/0x2c) [] (pit_clkevt_shutdown) from [] (clockevents_switch_state+0xe8) [] (clockevents_switch_state) from [] (clockevents_shutdown+0x1) [] (clockevents_shutdown) from [] (tick_check_new_device+0x54/0) [] (tick_check_new_device) from [] (clockevents_register_device) [] (clockevents_register_device) from [] (clocksource_probe+0x4) [] (clocksource_probe) from [] (start_kernel+0x248/0x35c) [] (start_kernel) from [<20008048>] (0x20008048) ---[ end trace 0000000000000001 ]--- Nevertheless it does boot, and seems to work fine. Thanks, -- Jean-Denis Girard SysNux Systèmes Linux en Polynésie française http://www.sysnux.pf/ Tél: +689 40.50.10.40 / GSM: +689 87.79.75.27