Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S934261AbcCNLoQ (ORCPT ); Mon, 14 Mar 2016 07:44:16 -0400 Received: from mail-wm0-f43.google.com ([74.125.82.43]:36625 "EHLO mail-wm0-f43.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752218AbcCNLoJ (ORCPT ); Mon, 14 Mar 2016 07:44:09 -0400 MIME-Version: 1.0 In-Reply-To: <56E28B5D.6000708@st.com> References: <1457294038-14243-1-git-send-email-afaerber@suse.de> <56DD7172.4000707@suse.de> <2714888.1DdqvJZ8cb@diego> <56DD7593.5060003@suse.de> <56DD8176.2080603@st.com> <56DD8FBE.9010200@suse.de> <56DD99A4.5030004@st.com> <56DDA26C.3050301@suse.de> <56DDA3D5.3090209@st.com> <56DDB749.1020808@suse.de> <56DE7E1D.5070508@st.com> <56DFE55B.2090806@st.com> <56DFE64B.8060606@st.com> <56DFF253.9050208@st.com> <56DFFA9E.7060602@st.com> <56E033C8.40506@st.com> <56E038CE.606@st.com> <56E13AAB.2080900@st.com> <56E28B5D.6000708@st.com> From: Tomeu Vizoso Date: Mon, 14 Mar 2016 12:43:46 +0100 X-Gmail-Original-Message-ID: Message-ID: Subject: Re: [PATCH v3 0/8] arm64: rockchip: Initial GeekBox enablement To: Giuseppe CAVALLARO Cc: Dinh Nguyen , =?UTF-8?Q?Andreas_F=C3=A4rber?= , Fabrice GASNIER , "devicetree@vger.kernel.org" , =?UTF-8?Q?Heiko_St=C3=BCbner?= , netdev@vger.kernel.org, "open list:ARM/Rockchip SoC..." , LAKML , Gabriel Fernandez , Alexandre TORGUE , =?UTF-8?Q?Frank_Sch=C3=A4fer?= , LKML Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3807 Lines: 115 On 11 March 2016 at 10:09, Giuseppe CAVALLARO wrote: > On 3/10/2016 5:47 PM, Dinh Nguyen wrote: >> >> On Thu, Mar 10, 2016 at 3:13 AM, Giuseppe CAVALLARO >> wrote: >>> >>> On 3/9/2016 5:31 PM, Dinh Nguyen wrote: >>>> >>>> >>>> On Wed, Mar 9, 2016 at 8:53 AM, Giuseppe CAVALLARO >>>> wrote: >>>>> >>>>> >>>>> Hi Tomeu, Dinh, Andreas >>>>> >>>>> I need a sum and help from you to go ahead on the >>>>> tx timeout. >>>>> >>>>> The "stmmac: MDIO fixes" seems to be the candidate to >>>>> fix the phy connection and I will send the V2 asap (Andreas' comment). >>>>> >>>>> So, supposing the probe is ok and phy is connected, >>>>> I need your input ... >>>>> >>>>> Tomeu: after revering the 0e80bdc9a72d (stmmac: first frame >>>>> prep at the end of xmit routine) the network is >>>>> not stable and there is a timeout after a while. >>>>> The box has 3.50 with normal desc settings. >>>>> >>>>> Dinh: the network is ok, I wonder if you can share a boot >>>>> log just to understand if the normal or enhanced >>>>> descriptors are used. >>>>> >>>> >>>> Here it is: >>> >>> >>> ... >>>> >>>> >>>> [ 0.850523] stmmac - user ID: 0x10, Synopsys ID: 0x37 >>>> [ 0.855570] Ring mode enabled >>>> [ 0.858611] DMA HW capability register supported >>>> [ 0.863128] Enhanced/Alternate descriptors >>>> [ 0.867482] Enabled extended descriptors >>>> [ 0.871482] RX Checksum Offload Engine supported (type 2) >>>> [ 0.876948] TX Checksum insertion supported >>>> [ 0.881204] Enable RX Mitigation via HW Watchdog Timer >>>> [ 0.886863] socfpga-dwmac ff702000.ethernet eth0: No MDIO subnode >>>> found >>>> [ 0.899090] libphy: stmmac: probed >>>> [ 0.902484] eth0: PHY ID 00221611 at 4 IRQ POLL (stmmac-0:04) active >>> >>> >>> >>> Thx Dinh, so you are using the Enhanced/Alternate descriptors >>> I am debugging on my side on a setup with normal descriptors, I let you >>> know >>> >> >> Doesn't the printout "Enhanced/Alternate descriptors" mean that I'm using >> Enhanced/Alternate descriptors? > > > yes this means that you have the Databook 3.70a and, from the HW > capability register, the driver will use the Enhanced/Alternate > descriptors. This is the same HW I am using on my side where the > stmmac is working fine. > > In the case where it is failing on net-next, although on Databook 3.50a, > the HW capability register says that there is no enhanced descriptors > and the driver uses the normal ones. > > Tomeu, I kindly ask you to try the patch attached. I found a bug on Tx > path for normal descriptors. Please let me know if this help. > Also let me know if we actually need to revert the 0e80bdc9a72d. Hi Peppe, with that patch I don't see any difference at all in my setup. So to be clear, with these commits on top of next-20160314, I still get the hang during boot: 209afef6f0cd ARM: dts: rockchip: Add mdio node to ethernet node 2315acc6cf7f Revert "stmmac: first frame prep at the end of xmit routine" b5e08e810c63 stmmac: fix tx prepare for normal desc 37c15a31d850 i2c: immediately mark ourselves as registered 4342eec3c5a2 Add linux-next specific files for 20160314 [ 27.521026] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:303 dev_watchdog+0x284/0x288 [ 27.529460] NETDEV WATCHDOG: eth0 (rk_gmac-dwmac): transmit queue 0 timed out https://git.collabora.com/cgit/user/tomeu/linux.git/log/?h=broken-eth-on-rock2 > I am trying to find some HW where test the normal descriptors to > speed-up the tests on my side directly. Maybe get your tree in kernelci.org? I'm not sure if it's currently doing any nfsroot boots, though. Regards, Tomeu > Let me know and thx in advance. > > Regards, > Peppe > >> >> Dinh >> >