Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S934436AbcCPLQG (ORCPT ); Wed, 16 Mar 2016 07:16:06 -0400 Received: from mx2.suse.de ([195.135.220.15]:47201 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754841AbcCPK7s (ORCPT ); Wed, 16 Mar 2016 06:59:48 -0400 X-Amavis-Alert: BAD HEADER SECTION, Duplicate header field: "References" From: Jiri Slaby To: stable@vger.kernel.org Cc: linux-kernel@vger.kernel.org, Konstantin Shkolnyy , Johan Hovold , Oliver Neukum , Jiri Slaby Subject: [PATCH 3.12 06/58] USB: cp210x: work around cp2108 GET_LINE_CTL bug Date: Wed, 16 Mar 2016 11:58:51 +0100 Message-Id: <0a164a5b94ebb28e32bceb0279f90a984b68eedd.1458125909.git.jslaby@suse.cz> X-Mailer: git-send-email 2.7.3 In-Reply-To: <377b71e18f20d69b0df301ce7040554f40ba9651.1458125909.git.jslaby@suse.cz> References: <377b71e18f20d69b0df301ce7040554f40ba9651.1458125909.git.jslaby@suse.cz> In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5103 Lines: 160 From: Konstantin Shkolnyy 3.12-stable review patch. If anyone has any objections, please let me know. =============== commit d0bf1ff0ae322aca59b00b9a2ad121d35a77e78f upstream. Add helper to access line-control register in order to work around a cp2108 GET_LINE_CTL bug. cp2108 GET_LINE_CTL returns the 16-bit value with the 2 bytes swapped. However, SET_LINE_CTL functions properly. When the driver tries to modify the register, it reads it, modifies some bits and writes back. Because the read bytes were swapped, this often results in an invalid value to be written. In turn, this causes cp2108 respond with a stall. The stall sometimes doesn't clear properly and cp2108 starts responding to following valid commands also with stalls, effectively failing. Signed-off-by: Konstantin Shkolnyy [johan: amend commit message, modify probe error handling ] Signed-off-by: Johan Hovold Cc: Oliver Neukum Signed-off-by: Jiri Slaby --- drivers/usb/serial/cp210x.c | 70 ++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 66 insertions(+), 4 deletions(-) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 296488511bd6..13c3aa352ebe 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -202,6 +202,7 @@ MODULE_DEVICE_TABLE(usb, id_table); struct cp210x_port_private { __u8 bInterfaceNumber; + bool has_swapped_line_ctl; }; static struct usb_serial_driver cp210x_device = { @@ -426,6 +427,60 @@ static inline int cp210x_set_config_single(struct usb_serial_port *port, } /* + * Detect CP2108 GET_LINE_CTL bug and activate workaround. + * Write a known good value 0x800, read it back. + * If it comes back swapped the bug is detected. + * Preserve the original register value. + */ +static int cp210x_detect_swapped_line_ctl(struct usb_serial_port *port) +{ + struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); + unsigned int line_ctl_save; + unsigned int line_ctl_test; + int err; + + err = cp210x_get_config(port, CP210X_GET_LINE_CTL, &line_ctl_save, 2); + if (err) + return err; + + line_ctl_test = 0x800; + err = cp210x_set_config(port, CP210X_SET_LINE_CTL, &line_ctl_test, 2); + if (err) + return err; + + err = cp210x_get_config(port, CP210X_GET_LINE_CTL, &line_ctl_test, 2); + if (err) + return err; + + if (line_ctl_test == 8) { + port_priv->has_swapped_line_ctl = true; + line_ctl_save = swab16((u16)line_ctl_save); + } + + return cp210x_set_config(port, CP210X_SET_LINE_CTL, &line_ctl_save, 2); +} + +/* + * Must always be called instead of cp210x_get_config(CP210X_GET_LINE_CTL) + * to workaround cp2108 bug and get correct value. + */ +static int cp210x_get_line_ctl(struct usb_serial_port *port, unsigned int *ctl) +{ + struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); + int err; + + err = cp210x_get_config(port, CP210X_GET_LINE_CTL, ctl, 2); + if (err) + return err; + + /* Workaround swapped bytes in 16-bit value from CP210X_GET_LINE_CTL */ + if (port_priv->has_swapped_line_ctl) + *ctl = swab16((u16)(*ctl)); + + return 0; +} + +/* * cp210x_quantise_baudrate * Quantises the baud rate as per AN205 Table 1 */ @@ -542,7 +597,7 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, cflag = *cflagp; - cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); + cp210x_get_line_ctl(port, &bits); cflag &= ~CSIZE; switch (bits & BITS_DATA_MASK) { case BITS_DATA_5: @@ -710,7 +765,7 @@ static void cp210x_set_termios(struct tty_struct *tty, /* If the number of data bits is to be updated */ if ((cflag & CSIZE) != (old_cflag & CSIZE)) { - cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); + cp210x_get_line_ctl(port, &bits); bits &= ~BITS_DATA_MASK; switch (cflag & CSIZE) { case CS5: @@ -744,7 +799,7 @@ static void cp210x_set_termios(struct tty_struct *tty, if ((cflag & (PARENB|PARODD|CMSPAR)) != (old_cflag & (PARENB|PARODD|CMSPAR))) { - cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); + cp210x_get_line_ctl(port, &bits); bits &= ~BITS_PARITY_MASK; if (cflag & PARENB) { if (cflag & CMSPAR) { @@ -770,7 +825,7 @@ static void cp210x_set_termios(struct tty_struct *tty, } if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) { - cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); + cp210x_get_line_ctl(port, &bits); bits &= ~BITS_STOP_MASK; if (cflag & CSTOPB) { bits |= BITS_STOP_2; @@ -890,6 +945,7 @@ static int cp210x_port_probe(struct usb_serial_port *port) struct usb_serial *serial = port->serial; struct usb_host_interface *cur_altsetting; struct cp210x_port_private *port_priv; + int ret; port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL); if (!port_priv) @@ -900,6 +956,12 @@ static int cp210x_port_probe(struct usb_serial_port *port) usb_set_serial_port_data(port, port_priv); + ret = cp210x_detect_swapped_line_ctl(port); + if (ret) { + kfree(port_priv); + return ret; + } + return 0; } -- 2.7.3