Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756390AbcCQDlE (ORCPT ); Wed, 16 Mar 2016 23:41:04 -0400 Received: from vern.gendns.com ([50.115.127.205]:58868 "EHLO vern.gendns.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1751678AbcCQDlB (ORCPT ); Wed, 16 Mar 2016 23:41:01 -0400 From: David Lechner Cc: Petr Kulhavy , David Lechner , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Russell King , Sekhar Nori , Kevin Hilman , Kishon Vijay Abraham I , Alan Stern , Greg Kroah-Hartman , Bin Liu , =?UTF-8?q?Andreas=20F=C3=A4rber?= , Tony Lindgren , Robert Jarzmik , Sergei Shtylyov , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-usb@vger.kernel.org Subject: [PATCH v2 09/11] usb: ohci-da8xx: Remove code that references mach Date: Wed, 16 Mar 2016 21:26:42 -0500 Message-Id: <1458181615-27782-10-git-send-email-david@lechnology.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1458181615-27782-1-git-send-email-david@lechnology.com> References: <1458181615-27782-1-git-send-email-david@lechnology.com> X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - vern.gendns.com X-AntiAbuse: Original Domain - vger.kernel.org X-AntiAbuse: Originator/Caller UID/GID - [47 12] / [47 12] X-AntiAbuse: Sender Address Domain - lechnology.com X-Get-Message-Sender-Via: vern.gendns.com: authenticated_id: davidmain+lechnology.com/only user confirmed/virtual account not confirmed X-Authenticated-Sender: vern.gendns.com: davidmain@lechnology.com X-Source: X-Source-Args: X-Source-Dir: To: unlisted-recipients:; (no To-header on input) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4981 Lines: 191 Including mach/* is frowned upon in device drivers, so get rid of it. This replaces usb20_clk and code that pokes CFGCHIP2 with a proper phy driver. Signed-off-by: David Lechner --- v2 changes: Uses the new phy driver instead of using a second clock. drivers/usb/host/ohci-da8xx.c | 90 +++++++++++++++++++++---------------------- 1 file changed, 44 insertions(+), 46 deletions(-) diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c index e5c33bc..c648674 100644 --- a/drivers/usb/host/ohci-da8xx.c +++ b/drivers/usb/host/ohci-da8xx.c @@ -15,58 +15,40 @@ #include #include #include - -#include +#include #include #ifndef CONFIG_ARCH_DAVINCI_DA8XX #error "This file is DA8xx bus glue. Define CONFIG_ARCH_DAVINCI_DA8XX." #endif -#define CFGCHIP2 DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG) - static struct clk *usb11_clk; -static struct clk *usb20_clk; +static struct phy *usb11_phy; /* Over-current indicator change bitmask */ static volatile u16 ocic_mask; -static void ohci_da8xx_clock(int on) +static int ohci_da8xx_enable(void) { - u32 cfgchip2; - - cfgchip2 = __raw_readl(CFGCHIP2); - if (on) { - clk_enable(usb11_clk); - - /* - * If USB 1.1 reference clock is sourced from USB 2.0 PHY, we - * need to enable the USB 2.0 module clocking, start its PHY, - * and not allow it to stop the clock during USB 2.0 suspend. - */ - if (!(cfgchip2 & CFGCHIP2_USB1PHYCLKMUX)) { - clk_enable(usb20_clk); - - cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN); - cfgchip2 |= CFGCHIP2_PHY_PLLON; - __raw_writel(cfgchip2, CFGCHIP2); - - pr_info("Waiting for USB PHY clock good...\n"); - while (!(__raw_readl(CFGCHIP2) & CFGCHIP2_PHYCLKGD)) - cpu_relax(); - } + int ret; - /* Enable USB 1.1 PHY */ - cfgchip2 |= CFGCHIP2_USB1SUSPENDM; - } else { - clk_disable(usb11_clk); - if (!(cfgchip2 & CFGCHIP2_USB1PHYCLKMUX)) - clk_disable(usb20_clk); + ret = clk_prepare_enable(usb11_clk); + if (ret) + return ret; - /* Disable USB 1.1 PHY */ - cfgchip2 &= ~CFGCHIP2_USB1SUSPENDM; + ret = phy_power_on(usb11_phy); + if (ret) { + clk_disable_unprepare(usb11_clk); + return ret; } - __raw_writel(cfgchip2, CFGCHIP2); + + return 0; +} + +static void ohci_da8xx_disable(void) +{ + phy_power_off(usb11_phy); + clk_disable_unprepare(usb11_clk); } /* @@ -92,7 +74,9 @@ static int ohci_da8xx_init(struct usb_hcd *hcd) dev_dbg(dev, "starting USB controller\n"); - ohci_da8xx_clock(1); + result = ohci_da8xx_enable(); + if (result < 0) + return result; /* * DA8xx only have 1 port connected to the pins but the HC root hub @@ -101,8 +85,10 @@ static int ohci_da8xx_init(struct usb_hcd *hcd) ohci->num_ports = 1; result = ohci_init(ohci); - if (result < 0) + if (result < 0) { + ohci_da8xx_disable(); return result; + } /* * Since we're providing a board-specific root hub port power control @@ -129,7 +115,7 @@ static int ohci_da8xx_init(struct usb_hcd *hcd) static void ohci_da8xx_stop(struct usb_hcd *hcd) { ohci_stop(hcd); - ohci_da8xx_clock(0); + ohci_da8xx_disable(); } static int ohci_da8xx_start(struct usb_hcd *hcd) @@ -301,12 +287,18 @@ static int usb_hcd_da8xx_probe(const struct hc_driver *driver, return -ENODEV; usb11_clk = devm_clk_get(&pdev->dev, "usb11"); - if (IS_ERR(usb11_clk)) + if (IS_ERR(usb11_clk)) { + if (PTR_ERR(usb11_clk) != -EPROBE_DEFER) + dev_err(&pdev->dev, "Failed to get clock.\n"); return PTR_ERR(usb11_clk); + } - usb20_clk = devm_clk_get(&pdev->dev, "usb20"); - if (IS_ERR(usb20_clk)) - return PTR_ERR(usb20_clk); + usb11_phy = devm_phy_get(&pdev->dev, "usbphy"); + if (IS_ERR(usb11_phy)) { + if (PTR_ERR(usb11_phy) != -EPROBE_DEFER) + dev_err(&pdev->dev, "Failed to get phy.\n"); + return PTR_ERR(usb11_phy); + } hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); if (!hcd) @@ -316,6 +308,7 @@ static int usb_hcd_da8xx_probe(const struct hc_driver *driver, hcd->regs = devm_ioremap_resource(&pdev->dev, mem); if (IS_ERR(hcd->regs)) { error = PTR_ERR(hcd->regs); + dev_err(&pdev->dev, "failed to map ohci.\n"); goto err; } hcd->rsrc_start = mem->start; @@ -397,7 +390,7 @@ static int ohci_da8xx_suspend(struct platform_device *pdev, if (ret) return ret; - ohci_da8xx_clock(0); + ohci_da8xx_disable(); hcd->state = HC_STATE_SUSPENDED; return ret; @@ -407,14 +400,19 @@ static int ohci_da8xx_resume(struct platform_device *dev) { struct usb_hcd *hcd = platform_get_drvdata(dev); struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int ret; if (time_before(jiffies, ohci->next_statechange)) msleep(5); ohci->next_statechange = jiffies; - ohci_da8xx_clock(1); + ret = ohci_da8xx_enable(); + if (ret) + return ret; + dev->dev.power.power_state = PMSG_ON; usb_hcd_resume_root_hub(hcd); + return 0; } #endif -- 1.9.1