Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932730AbcCTAzm (ORCPT ); Sat, 19 Mar 2016 20:55:42 -0400 Received: from mail.kernel.org ([198.145.29.136]:47458 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932485AbcCTAzk (ORCPT ); Sat, 19 Mar 2016 20:55:40 -0400 Date: Sat, 19 Mar 2016 19:55:35 -0500 From: Rob Herring To: Amitkumar Karwar Cc: linux-bluetooth@vger.kernel.org, Cathy Luo , linux-kernel@vger.kernel.org, Nishant Sarmukadam , devicetree@vger.kernel.org, Wei-Ning Huang , Xinming Hu Subject: Re: [PATCH v5 1/2] dt: bindings: add MARVELL's bt-sd8xxx wireless device Message-ID: <20160320005535.GA13586@rob-hp-laptop> References: <1458299084-31976-1-git-send-email-akarwar@marvell.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1458299084-31976-1-git-send-email-akarwar@marvell.com> User-Agent: Mutt/1.5.23 (2014-03-12) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4835 Lines: 140 On Fri, Mar 18, 2016 at 04:04:43AM -0700, Amitkumar Karwar wrote: > From: Xinming Hu > > Add device tree binding documentation for MARVELL's bluetooth sdio > (sd8897 and sd8997) chip. > > Signed-off-by: Xinming Hu > Signed-off-by: Amitkumar Karwar > --- > Listing changelist for both 1/2 and 2/2 here > v2: Fixed build error reported by kbuild test robot > drivers/bluetooth/btmrvl_platform.c:141:22: error: > 'btmrvl_plt_pm_ops' undeclared here (not in a function) > > v3: Add NULL check for 'btmrvl_plt_dev' > > v4: Moved the bindings file to bindings/net/ > Corrected the name of 'name' and 'compatible' properties(Rob Herring) > > v5: Comments for wlan patches were applicable here as well. Like all binding > changes in single file, specifying node as a child of SDIO controller. > --- > Documentation/devicetree/bindings/btmrvl.txt | 29 ------------ > .../devicetree/bindings/net/marvell-bt-sd8xxx.txt | 55 ++++++++++++++++++++++ > 2 files changed, 55 insertions(+), 29 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/btmrvl.txt > create mode 100644 Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt > > diff --git a/Documentation/devicetree/bindings/btmrvl.txt b/Documentation/devicetree/bindings/btmrvl.txt > deleted file mode 100644 > index 58f964b..0000000 > --- a/Documentation/devicetree/bindings/btmrvl.txt > +++ /dev/null > @@ -1,29 +0,0 @@ > -btmrvl > ------- > - > -Required properties: > - > - - compatible : must be "btmrvl,cfgdata" > - > -Optional properties: > - > - - btmrvl,cal-data : Calibration data downloaded to the device during > - initialization. This is an array of 28 values(u8). > - > - - btmrvl,gpio-gap : gpio and gap (in msecs) combination to be > - configured. > - > -Example: > - > -GPIO pin 13 is configured as a wakeup source and GAP is set to 100 msecs > -in below example. > - > -btmrvl { > - compatible = "btmrvl,cfgdata"; > - > - btmrvl,cal-data = /bits/ 8 < > - 0x37 0x01 0x1c 0x00 0xff 0xff 0xff 0xff 0x01 0x7f 0x04 0x02 > - 0x00 0x00 0xba 0xce 0xc0 0xc6 0x2d 0x00 0x00 0x00 0x00 0x00 > - 0x00 0x00 0xf0 0x00>; > - btmrvl,gpio-gap = <0x0d64>; > -}; > diff --git a/Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt b/Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt > new file mode 100644 > index 0000000..b031431 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt > @@ -0,0 +1,55 @@ > +Marvell 8897/8997 (sd8897/sd8997) bluetooth SDIO devices > +------ > + > +Required properties: > + > + - compatible : should be one of the following: > + * "marvell,bt-sd8897" > + * "marvell,bt-sd8997" -bt would be preferred order. > + > +Optional properties: > + > + - btmrvl,cal-data : Calibration data downloaded to the device during > + initialization. This is an array of 28 values(u8). > + > + - btmrvl,wakeuppin-gap : wakeup pin and gap (in msecs) combination to be > + configured to firmware. 'wakeuppin' is a wakeup pin number > + of bluetooth chip. 'gap' is a wakeup latency of a host platform. > + This is needed to work chip's sleep feature as expected. Make this 2 properties. > + - interrupt-parent: phandle of the parent interrupt controller > + - interrupts : interrupt pin number to the cpu. driver will request an irq based on > + this interrupt number. during system suspend, the irq will be enabled > + as system wakeup source, so that the bluetooth chip can wakeup host > + platform under certain condition. during system resume, the irq will > + be disabled to make sure unnecessary interrupt is not received. > + > +Example: > + > +IRQ pin 119 is used as system wakeup source interrupt. > +wakeuppin 13 and gap 100ms are configured so that firmware can wakeup host > +using this device side pin and wakeup latency. > +calibration data is also available in below example. > + > +&mmc3 { > + status = "okay"; > + vmmc-supply = <&wlan_en_reg>; > + bus-width = <4>; > + cap-power-off-card; > + keep-power-in-suspend; > + > + #address-cells = <1>; > + #size-cells = <0>; > + btmrvl: btmrvl@3 { > + compatible = "marvell,bt-sd8897"; > + reg = <2>; Same unit-address and reg mismatch. > + interrupt-parent = <&pio>; > + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; > + > + btmrvl,cal-data = /bits/ 8 < > + 0x37 0x01 0x1c 0x00 0xff 0xff 0xff 0xff 0x01 0x7f 0x04 0x02 > + 0x00 0x00 0xba 0xce 0xc0 0xc6 0x2d 0x00 0x00 0x00 0x00 0x00 > + 0x00 0x00 0xf0 0x00>; > + btmrvl,wakeuppin-gap = <0x0d64>; > + }; > +}; > + > -- > 1.8.1.4 > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html