Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
	id S1757186AbcCURLG (ORCPT <rfc822;w@1wt.eu>);
	Mon, 21 Mar 2016 13:11:06 -0400
Received: from relay3.sgi.com ([192.48.152.1]:33755 "EHLO relay.sgi.com"
	rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP
	id S1756899AbcCURLE (ORCPT <rfc822;linux-kernel@vger.kernel.org>);
	Mon, 21 Mar 2016 13:11:04 -0400
X-Greylist: delayed 409 seconds by postgrey-1.27 at vger.kernel.org; Mon, 21 Mar 2016 13:11:04 EDT
From: Alex Thorlton <athorlton@sgi.com>
To: linux-kernel@vger.kernel.org
Cc: Alex Thorlton <athorlton@sgi.com>, Jonathan Corbet <corbet@lwn.net>,
        linux-doc@vger.kernel.org, Hedi Berriche <hedi@sgi.com>
Subject: [PATCH 2/2] Add documentation for the bau parameter
Date: Mon, 21 Mar 2016 12:04:12 -0500
Message-Id: <1458579852-37580-3-git-send-email-athorlton@sgi.com>
X-Mailer: git-send-email 1.8.5.6
In-Reply-To: <1458579852-37580-1-git-send-email-athorlton@sgi.com>
References: <1458579852-37580-1-git-send-email-athorlton@sgi.com>
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org
Content-Length: 1229
Lines: 40

This commit updates kernel-parameters.txt with some information about
the new "bau" parameter.

Signed-off-by: Alex Thorltlon <athorlton@sgi.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Hedi Berriche <hedi@sgi.com>
Cc: linux-kernel@vger.kernel.org

---
 Documentation/kernel-parameters.txt | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index def4791..c5115e4 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -131,6 +131,7 @@ parameter is applicable:
 			More X86-64 boot options can be found in
 			Documentation/x86/x86_64/boot-options.txt .
 	X86	Either 32-bit or 64-bit x86 (same as X86-32+X86-64)
+	X86_UV	SGI UV support is enabled.
 	XEN	Xen support is enabled
 
 In addition, the following text indicates that the option:
@@ -542,6 +543,13 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			Format: <int> (must be >=0)
 			Default: 64
 
+	bau=		[X86_UV] Enable the BAU on SGI UV.  The default
+			behavior is to disable the BAU (i.e. bau=off).
+		on
+			Enable the BAU.
+		off
+			Disable the BAU.
+
 	baycom_epp=	[HW,AX25]
 			Format: <io>,<mode>
 
-- 
1.8.5.6