Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756798AbcCVRxy (ORCPT ); Tue, 22 Mar 2016 13:53:54 -0400 Received: from mail-vk0-f51.google.com ([209.85.213.51]:34205 "EHLO mail-vk0-f51.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752595AbcCVRxu (ORCPT ); Tue, 22 Mar 2016 13:53:50 -0400 MIME-Version: 1.0 In-Reply-To: <1458177323-21694-2-git-send-email-jitao.shi@mediatek.com> References: <1458177323-21694-1-git-send-email-jitao.shi@mediatek.com> <1458177323-21694-2-git-send-email-jitao.shi@mediatek.com> From: Daniel Kurtz Date: Wed, 23 Mar 2016 01:53:29 +0800 X-Google-Sender-Auth: MgTuPVFl9yW8cbJfbmImfwn3NvY Message-ID: Subject: Re: [PATCH v13 2/2] drm/bridge: Add I2C based driver for ps8640 bridge To: Jitao Shi Cc: David Airlie , Matthias Brugger , Mark Rutland , stonea168@163.com, dri-devel , Ajay Kumar , Vincent Palatin , cawa cheng , =?UTF-8?B?QmliYnkgSHNpZWggKOisnea/n+mBoCk=?= , CK HU , Russell King , Thierry Reding , Sean Paul , "open list:OPEN FIRMWARE AND..." , Sascha Hauer , Pawel Moll , Ian Campbell , Inki Dae , Rob Herring , "moderated list:ARM/Mediatek SoC support" , Yingjoe Chen , =?UTF-8?B?RWRkaWUgSHVhbmcgKOm7g+aZuuWCkSk=?= , "linux-arm-kernel@lists.infradead.org" , Rahul Sharma , srv_heupstream , "linux-kernel@vger.kernel.org" , Philipp Zabel , Kumar Gala , Andy Yan Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 40173 Lines: 1177 Hi Jitao, This patch looks really good now. Just saw small nits below. Other than these small items, for the series: Reviewed-by: Daniel Kurtz On Thu, Mar 17, 2016 at 9:15 AM, Jitao Shi wrote: > This patch adds drm_bridge driver for parade DSI to eDP bridge chip. > > Signed-off-by: Jitao Shi > --- > Changes since v12: > - fix hw_chip_id build warning > > Changes since v11: > - Remove depends on I2C, add DRM depends > - Reuse ps8640_write_bytes() in ps8640_write_byte() > - Use timer check for polling like the routines in > - Fix no drm_connector_unregister/drm_connector_cleanup when ps8640_bridge_attach fail > - Check the ps8640 hardware id in ps8640_validate_firmware > - Remove fw_version check > - Move ps8640_validate_firmware before ps8640_enter_bl > - Add ddc_i2c unregister when probe fail and ps8640_remove > > The following patches are needed to support dsi host through none dsi bus: > https://patchwork.kernel.org/patch/8289181/ ("drm/dsi: check for CONFIG_OF when defining") > https://patchwork.kernel.org/patch/8289051/ ("drm/dsi: Use mipi_dsi_device_register_full for DSI device") > https://patchwork.kernel.org/patch/8289081/ ("drm/dsi: Try to match non-DT DSI devices") > https://patchwork.kernel.org/patch/8289121/ ("drm/dsi: Add routine to unregister a DSI device") > https://patchwork.kernel.org/patch/8289091/ ("drm/dsi: Get DSI host by DT device node") > --- > drivers/gpu/drm/bridge/Kconfig | 12 + > drivers/gpu/drm/bridge/Makefile | 1 + > drivers/gpu/drm/bridge/parade-ps8640.c | 1073 ++++++++++++++++++++++++++++++++ > 3 files changed, 1086 insertions(+) > create mode 100644 drivers/gpu/drm/bridge/parade-ps8640.c > > diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig > index 27e2022..be6084e 100644 > --- a/drivers/gpu/drm/bridge/Kconfig > +++ b/drivers/gpu/drm/bridge/Kconfig > @@ -40,4 +40,16 @@ config DRM_PARADE_PS8622 > ---help--- > Parade eDP-LVDS bridge chip driver. > > +config DRM_PARADE_PS8640 > + tristate "Parade PS8640 MIPI DSI to eDP Converter" > + depends on DRM > + depends on OF > + select DRM_KMS_HELPER > + select DRM_MIPI_DSI > + select DRM_PANEL > + ---help--- > + Choose this option if you have PS8640 for display > + The PS8640 is a high-performance and low-power > + MIPI DSI to eDP converter > + > endmenu > diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile > index f13c33d..fbe38dc 100644 > --- a/drivers/gpu/drm/bridge/Makefile > +++ b/drivers/gpu/drm/bridge/Makefile > @@ -4,3 +4,4 @@ obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o > obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o > obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o > obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o > +obj-$(CONFIG_DRM_PARADE_PS8640) += parade-ps8640.o > diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c > new file mode 100644 > index 0000000..7bd5c12 > --- /dev/null > +++ b/drivers/gpu/drm/bridge/parade-ps8640.c > @@ -0,0 +1,1073 @@ > +/* > + * Copyright (c) 2014 MediaTek Inc. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include > +#include > +#include > +#include > +#include > +#include > + > +#define PAGE2_SPI_CFG3 0x82 > +#define I2C_TO_SPI_RESET 0x20 > +#define PAGE2_ROMADD_BYTE1 0x8e > +#define PAGE2_ROMADD_BYTE2 0x8f > +#define PAGE2_SWSPI_WDATA 0x90 > +#define PAGE2_SWSPI_RDATA 0x91 > +#define PAGE2_SWSPI_LEN 0x92 > +#define PAGE2_SWSPI_CTL 0x93 > +#define TRIGGER_NO_READBACK 0x05 > +#define TRIGGER_READBACK 0x01 > +#define PAGE2_SPI_STATUS 0x9e > +#define PAGE2_GPIO_L 0xa6 > +#define PAGE2_GPIO_H 0xa7 > +#define PS_GPIO9 BIT(1) > +#define PAGE2_IROM_CTRL 0xb0 > +#define IROM_ENABLE 0xc0 > +#define IROM_DISABLE 0x80 > +#define PAGE2_SW_REST 0xbc Is this supposed to be "PAGE2_SW_RESET"? > +#define SPI_SW_RESET BIT(7) > +#define MPU_SW_RESET BIT(6) > +#define PAGE2_ENCTLSPI_WR 0xda > +#define PAGE2_I2C_BYPASS 0xea > +#define I2C_BYPASS_EN 0xd0 > +#define PAGE3_SET_ADD 0xfe > +#define PAGE3_SET_VAL 0xff > +#define VDO_CTL_ADD 0x13 > +#define VDO_DIS 0x18 > +#define VDO_EN 0x1c > +#define PAGE4_REV_L 0xf0 > +#define PAGE4_REV_H 0xf1 > +#define PAGE4_CHIP_L 0xf2 > +#define PAGE4_CHIP_H 0xf3 > + > +/* Firmware */ > +#define SPI_MAX_RETRY_CNT 8 > +#define PS_FW_NAME "ps864x_fw.bin" > + > +#define FW_CHIP_ID_OFFSET 0 > +#define FW_VERSION_OFFSET 2 > +#define EDID_I2C_ADDR 0x50 > + > +#define WRITE_STATUS_REG_CMD 0x01 > +#define READ_STATUS_REG_CMD 0x05 > +#define BUSY BIT(0) > +#define CLEAR_ALL_PROTECT 0x00 > +#define BLK_PROTECT_BITS 0x0c > +#define STATUS_REG_PROTECT BIT(7) > +#define WRITE_ENABLE_CMD 0x06 > +#define CHIP_ERASE_CMD 0xc7 > + > +#define bridge_to_ps8640(e) container_of(e, struct ps8640, bridge) > +#define connector_to_ps8640(e) container_of(e, struct ps8640, connector) > + > +struct ps8640_info { > + u8 family_id; > + u8 variant_id; > + u16 version; > +}; > + > +struct ps8640 { > + struct drm_connector connector; > + struct drm_bridge bridge; > + struct edid *edid; > + struct mipi_dsi_device dsi; > + struct i2c_client *page[8]; > + struct i2c_client *ddc_i2c; > + struct regulator_bulk_data supplies[2]; > + struct drm_panel *panel; > + struct gpio_desc *gpio_rst_n; > + struct gpio_desc *gpio_slp_n; > + struct gpio_desc *gpio_mode_sel_n; > + bool enabled; > + > + /* firmware file info */ > + bool in_fw_update; > + struct ps8640_info info; > +}; > + > +static const u8 enc_ctrl_code[6] = {0xaa, 0x55, 0x50, 0x41, 0x52, 0x44}; > +static const u8 hw_chip_id[4] = {0x00, 0x0a, 0x00, 0x30}; > + > +static int ps8640_read(struct i2c_client *client, u8 reg, u8 *data, > + u16 data_len) > +{ > + int ret; > + struct i2c_msg msgs[] = { > + { > + .addr = client->addr, > + .flags = 0, > + .len = 1, > + .buf = ®, > + }, > + { > + .addr = client->addr, > + .flags = I2C_M_RD, > + .len = data_len, > + .buf = data, > + } > + }; > + > + ret = i2c_transfer(client->adapter, msgs, 2); > + > + if (ret == 2) > + return 0; > + if (ret < 0) > + return ret; > + else > + return -EIO; > +} > + > +static int ps8640_write_bytes(struct i2c_client *client, u8 *data, Can you make this: const u8 * data > + u16 data_len) > +{ > + int ret; > + struct i2c_msg msg; > + > + msg.addr = client->addr; > + msg.flags = 0; > + msg.len = data_len; > + msg.buf = data; > + > + ret = i2c_transfer(client->adapter, &msg, 1); > + if (ret == 1) > + return 0; > + if (ret < 0) > + return ret; > + else > + return -EIO; > +} > + > +static int ps8640_write_byte(struct i2c_client *client, u8 reg, u8 data) > +{ > + u8 buf[] = {reg, data}; > + > + return ps8640_write_bytes(client, buf, sizeof(buf)); > +} > + > +static void ps8640_get_mcu_fw_version(struct ps8640 *ps_bridge) > +{ > + struct i2c_client *client = ps_bridge->page[5]; > + u8 fw_ver[2]; > + > + ps8640_read(client, 0x4, fw_ver, 2); > + ps_bridge->info.version = (fw_ver[0] << 8) | fw_ver[1]; > + > + DRM_INFO_ONCE("ps8640 rom fw version %d.%d\n", fw_ver[0], fw_ver[1]); > +} > + > +static int ps8640_bridge_enable(struct ps8640 *ps_bridge) > +{ > + struct i2c_client *client = ps_bridge->page[3]; > + u8 vdo_ctrl_buf[3] = {PAGE3_SET_ADD, VDO_CTL_ADD, VDO_EN}; > + > + return ps8640_write_bytes(client, vdo_ctrl_buf, 3); > +} > + > +static int ps8640_bridge_disable(struct ps8640 *ps_bridge) > +{ > + struct i2c_client *client = ps_bridge->page[3]; > + u8 vdo_ctrl_buf[3] = {PAGE3_SET_ADD, VDO_CTL_ADD, VDO_DIS}; > + > + return ps8640_write_bytes(client, vdo_ctrl_buf, 3); > +} > + > +static void ps8640_pre_enable(struct drm_bridge *bridge) > +{ > + struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); > + struct i2c_client *client = ps_bridge->page[2]; > + int err; > + u8 set_vdo_done; > + ktime_t timeout; > + > + if (ps_bridge->in_fw_update) > + return; > + > + if (ps_bridge->enabled) > + return; > + > + err = drm_panel_prepare(ps_bridge->panel); > + if (err < 0) { > + DRM_ERROR("failed to prepare panel: %d\n", err); > + return; > + } > + > + err = regulator_bulk_enable(ARRAY_SIZE(ps_bridge->supplies), > + ps_bridge->supplies); > + if (err < 0) { > + DRM_ERROR("cannot enable regulators %d\n", err); > + goto err_panel_unprepare; > + } > + > + gpiod_set_value(ps_bridge->gpio_slp_n, 1); > + gpiod_set_value(ps_bridge->gpio_rst_n, 0); > + usleep_range(2000, 2500); > + gpiod_set_value(ps_bridge->gpio_rst_n, 1); > + > + /* > + * Wait for the ps8640 embed mcu ready > + * First wait 200ms and then check the mcu ready flag every 20ms > + */ > + msleep(200); > + > + timeout = ktime_add_ms(ktime_get(), 200); > + for (;;) { > + err = ps8640_read(client, PAGE2_GPIO_H, &set_vdo_done, 1); > + if (err < 0) { > + DRM_ERROR("failed read PAGE2_GPIO_H: %d\n", err); > + goto err_regulators_disable; > + } > + if ((set_vdo_done & PS_GPIO9) == PS_GPIO9) > + break; > + if (ktime_compare(ktime_get(), timeout) > 0) > + break; > + msleep(20); > + } > + > + if (ps_bridge->info.version == 0) > + ps8640_get_mcu_fw_version(ps_bridge); > + /* Switch access edp panel's edid through i2c */ > + ps8640_write_byte(client, PAGE2_I2C_BYPASS, I2C_BYPASS_EN); > + ps_bridge->enabled = true; > + > + return; > + > +err_regulators_disable: > + regulator_bulk_disable(ARRAY_SIZE(ps_bridge->supplies), > + ps_bridge->supplies); > +err_panel_unprepare: > + drm_panel_unprepare(ps_bridge->panel); > +} > + > +static void ps8640_enable(struct drm_bridge *bridge) > +{ > + struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); > + int err; > + > + err = ps8640_bridge_enable(ps_bridge); > + if (err) > + DRM_ERROR("failed to enable unmutevideo: %d\n", err); > + > + err = drm_panel_enable(ps_bridge->panel); > + if (err < 0) > + DRM_ERROR("failed to enable panel: %d\n", err); > +} > + > +static void ps8640_disable(struct drm_bridge *bridge) > +{ > + struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); > + int err; > + > + err = drm_panel_disable(ps_bridge->panel); > + if (err < 0) > + DRM_ERROR("failed to disable panel: %d\n", err); > + > + err = ps8640_bridge_disable(ps_bridge); > + if (err < 0) > + DRM_ERROR("failed to disable bridge: %d\n", err); > +} > + > +static void ps8640_post_disable(struct drm_bridge *bridge) > +{ > + struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); > + int err; > + > + if (ps_bridge->in_fw_update) > + return; > + > + if (!ps_bridge->enabled) > + return; > + > + ps_bridge->enabled = false; > + > + gpiod_set_value(ps_bridge->gpio_rst_n, 0); > + gpiod_set_value(ps_bridge->gpio_slp_n, 0); > + err = regulator_bulk_disable(ARRAY_SIZE(ps_bridge->supplies), > + ps_bridge->supplies); > + if (err < 0) > + DRM_ERROR("cannot disable regulators %d\n", err); > + > + err = drm_panel_unprepare(ps_bridge->panel); > + if (err) > + DRM_ERROR("failed to unprepare panel: %d\n", err); > +} > + > +static int ps8640_get_modes(struct drm_connector *connector) > +{ > + struct ps8640 *ps_bridge = connector_to_ps8640(connector); > + struct device *dev = &ps_bridge->page[0]->dev; > + u8 *edid; > + int ret, num_modes = 0; > + bool power_off; > + > + if (ps_bridge->edid) > + return drm_add_edid_modes(connector, ps_bridge->edid); > + > + power_off = !ps_bridge->enabled; > + ps8640_pre_enable(&ps_bridge->bridge); > + > + edid = devm_kmalloc(dev, EDID_LENGTH, GFP_KERNEL); > + if (!edid) { > + DRM_ERROR("Failed to allocate EDID\n"); > + return 0; > + } > + > + ret = ps8640_read(ps_bridge->ddc_i2c, 0, edid, EDID_LENGTH); > + if (ret) > + goto out; > + > + ps_bridge->edid = (struct edid *)edid; > + drm_mode_connector_update_edid_property(connector, ps_bridge->edid); > + > + num_modes = drm_add_edid_modes(connector, ps_bridge->edid); > + > +out: > + if (power_off) > + ps8640_post_disable(&ps_bridge->bridge); > + > + return num_modes; > +} > + > +static struct drm_encoder *ps8640_best_encoder(struct drm_connector *connector) > +{ > + struct ps8640 *ps_bridge = connector_to_ps8640(connector); > + > + return ps_bridge->bridge.encoder; > +} > + > +static const struct drm_connector_helper_funcs ps8640_connector_helper_funcs = { > + .get_modes = ps8640_get_modes, > + .best_encoder = ps8640_best_encoder, > +}; > + > +static enum drm_connector_status ps8640_detect(struct drm_connector *connector, > + bool force) > +{ > + return connector_status_connected; > +} > + > +static void ps8640_connector_destroy(struct drm_connector *connector) > +{ > + drm_connector_unregister(connector); > + drm_connector_cleanup(connector); > +} > + > +static const struct drm_connector_funcs ps8640_connector_funcs = { > + .dpms = drm_atomic_helper_connector_dpms, > + .fill_modes = drm_helper_probe_single_connector_modes, > + .detect = ps8640_detect, > + .destroy = ps8640_connector_destroy, > + .reset = drm_atomic_helper_connector_reset, > + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > +}; > + > +int ps8640_bridge_attach(struct drm_bridge *bridge) > +{ > + struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); > + struct device *dev = &ps_bridge->page[0]->dev; > + struct device_node *np = dev->of_node; > + struct device_node *port, *in_ep; > + struct device_node *dsi_node = NULL; > + struct mipi_dsi_host *host = ps_bridge->dsi.host; > + int ret; > + > + ret = drm_connector_init(bridge->dev, &ps_bridge->connector, > + &ps8640_connector_funcs, > + DRM_MODE_CONNECTOR_eDP); > + > + if (ret) { > + DRM_ERROR("Failed to initialize connector with drm: %d\n", ret); > + return ret; > + } > + > + drm_connector_helper_add(&ps_bridge->connector, > + &ps8640_connector_helper_funcs); > + drm_connector_register(&ps_bridge->connector); > + > + ps_bridge->connector.dpms = DRM_MODE_DPMS_ON; > + drm_mode_connector_attach_encoder(&ps_bridge->connector, > + bridge->encoder); > + > + if (ps_bridge->panel) > + drm_panel_attach(ps_bridge->panel, &ps_bridge->connector); > + > + /* port@0 is ps8640 dsi input port */ > + port = of_graph_get_port_by_id(np, 0); > + if (port) { > + in_ep = of_get_child_by_name(port, "endpoint"); > + of_node_put(port); > + if (in_ep) { > + dsi_node = of_graph_get_remote_port_parent(in_ep); > + of_node_put(in_ep); > + } > + } > + if (dsi_node) { > + host = of_find_mipi_dsi_host_by_node(dsi_node); > + of_node_put(dsi_node); > + if (!host) { > + ret = -ENODEV; > + goto err; > + } > + } > + > + ps_bridge->dsi.host = host; > + ps_bridge->dsi.mode_flags = MIPI_DSI_MODE_VIDEO | > + MIPI_DSI_MODE_VIDEO_SYNC_PULSE; > + ps_bridge->dsi.format = MIPI_DSI_FMT_RGB888; > + ps_bridge->dsi.lanes = 4; > + ret = mipi_dsi_attach(&ps_bridge->dsi); > + if (ret) > + goto err; > + > + return 0; > +err: > + if (ps_bridge->panel) > + drm_panel_detach(ps_bridge->panel); > + drm_connector_unregister(&ps_bridge->connector); > + drm_connector_cleanup(&ps_bridge->connector); > + return ret; > +} > + > +static const struct drm_bridge_funcs ps8640_bridge_funcs = { > + .attach = ps8640_bridge_attach, > + .disable = ps8640_disable, > + .post_disable = ps8640_post_disable, > + .pre_enable = ps8640_pre_enable, > + .enable = ps8640_enable, > +}; > + > +/* Firmware Version is returned as Major.Minor.Build */ > +static ssize_t ps8640_fw_version_show(struct device *dev, > + struct device_attribute *attr, char *buf) > +{ > + struct ps8640 *ps_bridge = dev_get_drvdata(dev); > + struct ps8640_info *info = &ps_bridge->info; > + > + return scnprintf(buf, PAGE_SIZE, "%u.%u\n", info->version >> 8, > + info->version & 0xff); > +} > + > +/* Hardware Version is returned as FamilyID.VariantID */ > +static ssize_t ps8640_hw_version_show(struct device *dev, > + struct device_attribute *attr, char *buf) > +{ > + struct ps8640 *ps_bridge = dev_get_drvdata(dev); > + struct ps8640_info *info = &ps_bridge->info; > + > + return scnprintf(buf, PAGE_SIZE, "ps%u.%u\n", info->family_id, > + info->variant_id); > +} > + > +static int ps8640_spi_send_cmd(struct ps8640 *ps_bridge, u8 *cmd, u8 cmd_len) > +{ > + struct i2c_client *client = ps_bridge->page[2]; > + u8 i, buf[3]; > + int ret; > + > + ret = ps8640_write_byte(client, PAGE2_IROM_CTRL, IROM_ENABLE); > + if (ret) > + goto err; > + > + /* write command in write port */ > + for (i = 0; i < cmd_len; i++) { > + ret = ps8640_write_byte(client, PAGE2_SWSPI_WDATA, cmd[i]); > + if (ret) { > + ps8640_write_byte(client, PAGE2_IROM_CTRL, > + IROM_DISABLE); > + goto err; Make this goto err_irom_disable, add a new label at the end of the function, and move the IROM_DISABLE after it: err_irom_disable: ps8640_write_byte(client, PAGE2_IROM_CTRL, IROM_DISABLE); > + } > + } > + > + buf[0] = PAGE2_SWSPI_LEN; > + buf[1] = cmd_len - 1; > + buf[2] = TRIGGER_NO_READBACK; nit: just initialize the buf array above. > + ret = ps8640_write_bytes(client, buf, 3); > + if (ret) { > + ps8640_write_byte(client, PAGE2_IROM_CTRL, IROM_DISABLE); > + goto err; > + } > + > + ret = ps8640_write_byte(client, PAGE2_IROM_CTRL, IROM_DISABLE); > + if (ret) > + goto err; > + > + return 0; > + > +err: > + dev_err(&client->dev, "send command err: %d\n", ret); > + return ret; > +} > + > +static int ps8640_wait_spi_ready(struct ps8640 *ps_bridge) > +{ > + struct i2c_client *client = ps_bridge->page[2]; > + u8 spi_rdy_st; > + ktime_t timeout; > + > + timeout = ktime_add_ms(ktime_get(), 200); > + for (;;) { > + ps8640_read(client, PAGE2_SPI_STATUS, &spi_rdy_st, 1); > + if ((spi_rdy_st & 0x0c) != 0x0c) > + break; > + > + if (ktime_compare(ktime_get(), timeout) > 0) { > + dev_err(&client->dev, "wait spi ready timeout\n"); > + return -EBUSY; > + } > + > + msleep(20); > + } > + > + return 0; > +} > + > +static int ps8640_wait_spi_nobusy(struct ps8640 *ps_bridge) > +{ > + struct i2c_client *client = ps_bridge->page[2]; > + u8 spi_status, buf[3]; > + int ret; > + ktime_t timeout; > + > + timeout = ktime_add_ms(ktime_get(), 500); > + for (;;) { > + /* 0x05 RDSR; Read-Status-Register */ > + ret = ps8640_write_byte(client, PAGE2_SWSPI_WDATA, > + READ_STATUS_REG_CMD); > + if (ret) > + goto err_send_cmd_exit; > + > + buf[0] = PAGE2_SWSPI_LEN; > + buf[1] = 0; > + buf[2] = TRIGGER_READBACK; Initialize buf above. > + ret = ps8640_write_bytes(client, buf, 3); > + if (ret) > + goto err_send_cmd_exit; > + > + /* delay for cmd send */ > + usleep_range(300, 500); > + /* wait for SPI ROM until not busy */ > + ret = ps8640_read(client, PAGE2_SWSPI_RDATA, &spi_status, 1); > + if (ret) > + goto err_send_cmd_exit; > + > + if (!(spi_status & BUSY)) > + break; > + > + if (ktime_compare(ktime_get(), timeout) > 0) { > + dev_err(&client->dev, "wait spi no busy timeout: %d\n", > + ret); > + return -EBUSY; > + } > + } > + > + return 0; > + > +err_send_cmd_exit: > + dev_err(&client->dev, "send command err: %d\n", ret); > + return ret; > +} > + > +static int ps8640_wait_rom_idle(struct ps8640 *ps_bridge) > +{ > + struct i2c_client *client = ps_bridge->page[0]; > + int ret; > + > + ret = ps8640_write_byte(client, PAGE2_IROM_CTRL, IROM_ENABLE); > + if (ret) > + goto exit; > + > + ret = ps8640_wait_spi_ready(ps_bridge); > + if (ret) > + goto err_spi; > + > + ret = ps8640_wait_spi_nobusy(ps_bridge); > + if (ret) > + goto err_spi; > + > + ret = ps8640_write_byte(client, PAGE2_IROM_CTRL, IROM_DISABLE); > + if (ret) > + goto exit; > + > + return 0; > + > +err_spi: > + ps8640_write_byte(client, PAGE2_IROM_CTRL, IROM_DISABLE); > +exit: > + if (ret) > + dev_err(&client->dev, "wait ps8640 rom idle fail: %d\n", ret); > + > + return ret; > +} > + > +static int ps8640_spi_dl_mode(struct ps8640 *ps_bridge) > +{ > + struct i2c_client *client = ps_bridge->page[2]; > + int ret; > + > + /* switch ps8640 mode to spi dl mode */ > + gpiod_set_value(ps_bridge->gpio_mode_sel_n, 0); > + > + /* reset spi interface */ > + ret = ps8640_write_byte(client, PAGE2_SW_REST, > + SPI_SW_RESET | MPU_SW_RESET); > + if (ret) > + goto exit; > + > + ret = ps8640_write_byte(client, PAGE2_SW_REST, MPU_SW_RESET); > + if (ret) > + goto exit; > + > +exit: > + if (ret) > + dev_err(&client->dev, "fail reset spi interface: %d\n", ret); > + > + return ret; > +} > + > +static int ps8640_rom_prepare(struct ps8640 *ps_bridge) > +{ > + struct i2c_client *client = ps_bridge->page[2]; > + struct device *dev = &client->dev; > + u8 i, cmd[2]; > + int ret; > + > + cmd[0] = WRITE_ENABLE_CMD; > + ret = ps8640_spi_send_cmd(ps_bridge, cmd, 1); > + if (ret) { > + dev_err(dev, "failed enable-write-status-register: %d\n", ret); > + return ret; > + } > + > + cmd[0] = WRITE_STATUS_REG_CMD; > + cmd[1] = CLEAR_ALL_PROTECT; > + ret = ps8640_spi_send_cmd(ps_bridge, cmd, 2); > + if (ret) { > + dev_err(dev, "fail disable all protection: %d\n", ret); > + return ret; > + } > + > + /* wait for SPI module ready */ > + ret = ps8640_wait_rom_idle(ps_bridge); > + if (ret) { > + dev_err(dev, "fail wait rom idle: %d\n", ret); > + return ret; > + } > + > + ps8640_write_byte(client, PAGE2_IROM_CTRL, IROM_ENABLE); > + for (i = 0; i < 6; i++) > + ps8640_write_byte(client, PAGE2_ENCTLSPI_WR, enc_ctrl_code[i]); > + ps8640_write_byte(client, PAGE2_IROM_CTRL, IROM_DISABLE); > + > + /* Enable-Write-Status-Register */ > + cmd[0] = WRITE_ENABLE_CMD; > + ret = ps8640_spi_send_cmd(ps_bridge, cmd, 1); > + if (ret) { > + dev_err(dev, "fail enable-write-status-register: %d\n", ret); > + return ret; > + } > + > + /* chip erase command */ > + cmd[0] = CHIP_ERASE_CMD; > + ret = ps8640_spi_send_cmd(ps_bridge, cmd, 1); > + if (ret) { > + dev_err(dev, "fail disable all protection: %d\n", ret); > + return ret; > + } > + > + ret = ps8640_wait_rom_idle(ps_bridge); > + if (ret) { > + dev_err(dev, "fail wait rom idle: %d\n", ret); > + return ret; > + } > + > + return 0; > +} > + > +static int ps8640_check_chip_id(struct ps8640 *ps_bridge) > +{ > + struct i2c_client *client = ps_bridge->page[4]; > + u8 buf[4]; > + > + ps8640_read(client, PAGE4_REV_L, buf, 4); > + return memcmp(buf, hw_chip_id, sizeof(buf)); > +} > + > +static int ps8640_validate_firmware(struct ps8640 *ps_bridge, > + const struct firmware *fw) > +{ > + struct i2c_client *client = ps_bridge->page[0]; > + u16 fw_chip_id; > + > + /* > + * Get the chip_id from the firmware. Make sure that it is the > + * right controller to do the firmware and config update. > + */ > + fw_chip_id = get_unaligned_le16(fw->data + FW_CHIP_ID_OFFSET); > + > + if (fw_chip_id != 0x8640 && ps8640_check_chip_id(ps_bridge) == 0) { > + dev_err(&client->dev, > + "chip id mismatch: fw 0x%x vs. chip 0x8640\n", > + fw_chip_id); > + return -EINVAL; > + } > + > + return 0; > +} > + > +static int ps8640_write_rom(struct ps8640 *ps_bridge, const struct firmware *fw) > +{ > + struct i2c_client *client = ps_bridge->page[0]; > + struct device *dev = &client->dev; > + struct i2c_client *client2 = ps_bridge->page[2]; > + struct i2c_client *client7 = ps_bridge->page[7]; > + unsigned int pos = 0; > + u8 buf[257], rom_page_id_buf[3]; > + int ret; > + u16 cpy_len; > + > + ps8640_write_byte(client2, PAGE2_SPI_CFG3, I2C_TO_SPI_RESET); > + msleep(100); > + ps8640_write_byte(client2, PAGE2_SPI_CFG3, 0x00); > + > + for (pos = 0; pos < fw->size; pos += cpy_len) { > + rom_page_id_buf[0] = PAGE2_ROMADD_BYTE1; > + rom_page_id_buf[1] = pos >> 8; > + rom_page_id_buf[2] = pos >> 16; > + ret = ps8640_write_bytes(client2, rom_page_id_buf, 3); > + if (ret) > + goto error; > + cpy_len = fw->size >= 256 + pos ? 256 : fw->size - pos; > + buf[0] = 0; > + memcpy(buf + 1, fw->data + pos, cpy_len); > + ret = ps8640_write_bytes(client7, buf, cpy_len + 1); > + if (ret) > + goto error; > + > + dev_dbg(dev, "fw update completed %u / %zu bytes\n", pos, > + fw->size); > + } > + return 0; > + > +error: > + dev_err(dev, "failed write extenal flash, %d\n", ret); > + return ret; > +} > + > +static int ps8640_spi_normal_mode(struct ps8640 *ps_bridge) > +{ > + u8 cmd[2]; > + struct i2c_client *client = ps_bridge->page[2]; > + > + /* Enable-Write-Status-Register */ > + cmd[0] = WRITE_ENABLE_CMD; > + ps8640_spi_send_cmd(ps_bridge, cmd, 1); > + > + /* protect BPL/BP0/BP1 */ > + cmd[0] = WRITE_STATUS_REG_CMD; > + cmd[1] = BLK_PROTECT_BITS | STATUS_REG_PROTECT; > + ps8640_spi_send_cmd(ps_bridge, cmd, 2); > + > + /* wait for SPI rom ready */ > + ps8640_wait_rom_idle(ps_bridge); > + > + /* disable PS8640 mapping function */ > + ps8640_write_byte(client, PAGE2_ENCTLSPI_WR, 0x00); > + > + gpiod_set_value(ps_bridge->gpio_mode_sel_n, 1); > + return 0; > +} > + > +static int ps8640_enter_bl(struct ps8640 *ps_bridge) > +{ > + ps_bridge->in_fw_update = true; > + return ps8640_spi_dl_mode(ps_bridge); > +} > + > +static void ps8640_exit_bl(struct ps8640 *ps_bridge, const struct firmware *fw) > +{ > + ps8640_spi_normal_mode(ps_bridge); > + ps_bridge->in_fw_update = false; > +} > + > +static int ps8640_load_fw(struct ps8640 *ps_bridge, const struct firmware *fw) > +{ > + struct i2c_client *client = ps_bridge->page[0]; > + struct device *dev = &client->dev; > + int ret; > + bool ps8640_status_backup = ps_bridge->enabled; > + > + ret = ps8640_validate_firmware(ps_bridge, fw); > + if (ret) > + return ret; > + > + if (!ps_bridge->in_fw_update) { > + if (!ps8640_status_backup) > + ps8640_pre_enable(&ps_bridge->bridge); > + > + ret = ps8640_enter_bl(ps_bridge); > + if (ret) > + goto exit; > + } > + > + ret = ps8640_rom_prepare(ps_bridge); > + if (ret) > + goto exit; > + > + ret = ps8640_write_rom(ps_bridge, fw); > + > +exit: > + if (ret) > + dev_err(dev, "Failed to load firmware, %d\n", ret); > + > + ps8640_exit_bl(ps_bridge, fw); > + if (!ps8640_status_backup) > + ps8640_post_disable(&ps_bridge->bridge); > + return ret; > +} > + > +static ssize_t ps8640_update_fw_store(struct device *dev, > + struct device_attribute *attr, > + const char *buf, size_t count) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct ps8640 *ps_bridge = i2c_get_clientdata(client); > + const struct firmware *fw; > + int error; > + > + error = request_firmware(&fw, PS_FW_NAME, dev); > + if (error) { > + dev_err(dev, "Unable to open firmware %s: %d\n", > + PS_FW_NAME, error); > + return error; > + } > + > + error = ps8640_load_fw(ps_bridge, fw); > + if (error) > + dev_err(dev, "The firmware update failed(%d)\n", error); > + else > + dev_info(dev, "The firmware update succeeded\n"); > + > + release_firmware(fw); > + return error ? error : count; > +} > + > +static DEVICE_ATTR(fw_version, S_IRUGO, ps8640_fw_version_show, NULL); > +static DEVICE_ATTR(hw_version, S_IRUGO, ps8640_hw_version_show, NULL); > +static DEVICE_ATTR(update_fw, S_IWUSR, NULL, ps8640_update_fw_store); > + > +static struct attribute *ps8640_attrs[] = { > + &dev_attr_fw_version.attr, > + &dev_attr_hw_version.attr, > + &dev_attr_update_fw.attr, > + NULL > +}; > + > +static const struct attribute_group ps8640_attr_group = { > + .attrs = ps8640_attrs, > +}; > + > +static void ps8640_remove_sysfs_group(void *data) > +{ > + struct ps8640 *ps_bridge = data; > + > + sysfs_remove_group(&ps_bridge->page[0]->dev.kobj, &ps8640_attr_group); > +} > + > +static int ps8640_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + struct device *dev = &client->dev; > + struct ps8640 *ps_bridge; > + struct device_node *np = dev->of_node; > + struct device_node *port, *out_ep; > + struct device_node *panel_node = NULL; > + int i, ret; > + > + ps_bridge = devm_kzalloc(dev, sizeof(*ps_bridge), GFP_KERNEL); > + if (!ps_bridge) > + return -ENOMEM; > + > + /* port@1 is ps8640 output port */ > + port = of_graph_get_port_by_id(np, 1); > + if (port) { > + out_ep = of_get_child_by_name(port, "endpoint"); > + of_node_put(port); > + if (out_ep) { > + panel_node = of_graph_get_remote_port_parent(out_ep); > + of_node_put(out_ep); > + } > + } > + if (panel_node) { > + ps_bridge->panel = of_drm_find_panel(panel_node); > + of_node_put(panel_node); > + if (!ps_bridge->panel) > + return -EPROBE_DEFER; > + } > + > + ps_bridge->supplies[0].supply = "vdd33"; > + ps_bridge->supplies[1].supply = "vdd12"; > + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ps_bridge->supplies), > + ps_bridge->supplies); > + if (ret) { > + dev_info(dev, "failed to get regulators: %d\n", ret); > + return ret; > + } > + > + ps_bridge->gpio_mode_sel_n = devm_gpiod_get(&client->dev, "mode-sel", > + GPIOD_OUT_HIGH); > + if (IS_ERR(ps_bridge->gpio_mode_sel_n)) { > + ret = PTR_ERR(ps_bridge->gpio_mode_sel_n); > + dev_err(dev, "cannot get mode-sel %d\n", ret); > + return ret; > + } > + > + ps_bridge->gpio_slp_n = devm_gpiod_get(&client->dev, "sleep", > + GPIOD_OUT_LOW); > + if (IS_ERR(ps_bridge->gpio_slp_n)) { > + ret = PTR_ERR(ps_bridge->gpio_slp_n); > + dev_err(dev, "cannot get sleep: %d\n", ret); > + return ret; > + } > + > + /* > + * Request the reset pin low to avoid the bridge being > + * initialized prematurely > + */ > + ps_bridge->gpio_rst_n = devm_gpiod_get(&client->dev, "reset", > + GPIOD_OUT_LOW); > + if (IS_ERR(ps_bridge->gpio_rst_n)) { > + ret = PTR_ERR(ps_bridge->gpio_rst_n); > + dev_err(dev, "cannot get reset: %d\n", ret); > + return ret; > + } > + > + ps_bridge->bridge.funcs = &ps8640_bridge_funcs; > + ps_bridge->bridge.of_node = dev->of_node; > + ret = drm_bridge_add(&ps_bridge->bridge); > + if (ret) { > + dev_err(dev, "Failed to add bridge: %d\n", ret); > + return ret; > + } > + > + ps_bridge->page[0] = client; > + ps_bridge->ddc_i2c = i2c_new_dummy(client->adapter, EDID_I2C_ADDR); > + if (!ps_bridge->ddc_i2c) { > + dev_err(dev, "failed ddc_i2c dummy device, address%02x\n", > + EDID_I2C_ADDR); > + ret = -EBUSY; > + goto exit_ddc_i2c_dummy; > + } > + /* > + * ps8640 uses multiple addresses, use dummy devices for them > + * page[0]: for DP control > + * page[1]: for VIDEO Bridge > + * page[2]: for control top > + * page[3]: for DSI Link Control1 > + * page[4]: for MIPI Phy > + * page[5]: for VPLL > + * page[6]: for DSI Link Control2 > + * page[7]: for spi rom mapping > + */ > + for (i = 1; i < 8; i++) { > + ps_bridge->page[i] = i2c_new_dummy(client->adapter, > + client->addr + i); > + if (!ps_bridge->page[i]) { > + dev_err(dev, "failed i2c dummy device, address%02x\n", > + client->addr + i); > + ret = -EBUSY; > + goto exit_dummy; > + } > + } > + i2c_set_clientdata(client, ps_bridge); > + > + ret = sysfs_create_group(&client->dev.kobj, &ps8640_attr_group); > + if (ret) { > + dev_err(dev, "failed to create sysfs entries: %d\n", ret); > + goto exit_dummy; > + } > + > + ret = devm_add_action(dev, ps8640_remove_sysfs_group, ps_bridge); > + if (ret) { > + dev_err(dev, "failed to add sysfs cleanup action: %d\n", ret); > + goto exit_remove_sysfs; > + } > + return 0; > + > +exit_remove_sysfs: > + sysfs_remove_group(&ps_bridge->page[0]->dev.kobj, &ps8640_attr_group); > +exit_dummy: > + for (i = 1; i < 8; i++) > + if (ps_bridge->page[i]) > + i2c_unregister_device(ps_bridge->page[i]); > + i2c_unregister_device(ps_bridge->ddc_i2c); > +exit_ddc_i2c_dummy: > + drm_bridge_remove(&ps_bridge->bridge); > + return ret; > +} > + > +static int ps8640_remove(struct i2c_client *client) > +{ > + struct ps8640 *ps_bridge = i2c_get_clientdata(client); > + int i; > + > + for (i = 1; i < 8; i++) > + i2c_unregister_device(ps_bridge->page[i]); > + > + i2c_unregister_device(ps_bridge->ddc_i2c); > + drm_bridge_remove(&ps_bridge->bridge); > + > + return 0; > +} > + > +static const struct i2c_device_id ps8640_i2c_table[] = { > + {"parade,ps8640", 0}, > + {}, > +}; > +MODULE_DEVICE_TABLE(i2c, ps8640_i2c_table); > + > +static const struct of_device_id ps8640_match[] = { > + { .compatible = "parade,ps8640" }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, ps8640_match); > + > +static struct i2c_driver ps8640_driver = { > + .id_table = ps8640_i2c_table, > + .probe = ps8640_probe, > + .remove = ps8640_remove, > + .driver = { > + .name = "parade,ps8640", > + .of_match_table = ps8640_match, > + }, > +}; > +module_i2c_driver(ps8640_driver); > + > +MODULE_AUTHOR("Jitao Shi "); > +MODULE_AUTHOR("CK Hu "); > +MODULE_DESCRIPTION("PARADE ps8640 DSI-eDP converter driver"); > +MODULE_LICENSE("GPL v2"); > -- > 1.7.9.5 > > > _______________________________________________ > Linux-mediatek mailing list > Linux-mediatek@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-mediatek