Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756655AbcCWTsC (ORCPT ); Wed, 23 Mar 2016 15:48:02 -0400 Received: from mail-wm0-f41.google.com ([74.125.82.41]:33886 "EHLO mail-wm0-f41.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756216AbcCWTr7 (ORCPT ); Wed, 23 Mar 2016 15:47:59 -0400 From: Srinivas Kandagatla To: Andy Gross , linux-arm-msm@vger.kernel.org Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-soc@vger.kernel.org, Srinivas Kandagatla Subject: [PATCH 07/12] ARM: dts: dragonboard-600c: add usb support Date: Wed, 23 Mar 2016 19:47:45 +0000 Message-Id: <1458762465-9630-1-git-send-email-srinivas.kandagatla@linaro.org> X-Mailer: git-send-email 2.5.0 In-Reply-To: <1458762366-9233-1-git-send-email-srinivas.kandagatla@linaro.org> References: <1458762366-9233-1-git-send-email-srinivas.kandagatla@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2267 Lines: 106 This patch adds usb host and otg support on board with required regulators. Signed-off-by: Srinivas Kandagatla --- .../arm/boot/dts/qcom-apq8064-dragonboard-600c.dts | 64 ++++++++++++++++++++++ 1 file changed, 64 insertions(+) diff --git a/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts b/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts index a977314..5374510 100644 --- a/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts +++ b/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts @@ -60,6 +60,12 @@ bias-pull-down; }; + s3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + qcom,switch-mode-frequency = <4800000>; + }; + s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -74,6 +80,18 @@ qcom,switch-mode-frequency = <3200000>; }; + l3 { + regulator-min-microvolt = <3050000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + + l4 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + l5 { regulator-min-microvolt = <2750000>; regulator-max-microvolt = <3000000>; @@ -85,6 +103,12 @@ regulator-max-microvolt = <2950000>; bias-pull-down; }; + + l23 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + bias-pull-down; + }; }; }; @@ -111,6 +135,46 @@ }; }; + /* OTG */ + phy@12500000 { + status = "okay"; + dr_mode = "peripheral"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; + }; + + phy@12520000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + + phy@12530000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + + gadget@12500000 { + status = "okay"; + }; + + /* OTG */ + usb@12500000 { + status = "okay"; + }; + + usb@12520000 { + status = "okay"; + }; + + usb@12530000 { + status = "okay"; + }; + amba { /* eMMC */ sdcc@12400000 { -- 2.5.0