Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932852AbcCWTs5 (ORCPT ); Wed, 23 Mar 2016 15:48:57 -0400 Received: from mail-wm0-f46.google.com ([74.125.82.46]:38740 "EHLO mail-wm0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756662AbcCWTsI (ORCPT ); Wed, 23 Mar 2016 15:48:08 -0400 From: Srinivas Kandagatla To: Andy Gross , linux-arm-msm@vger.kernel.org Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-soc@vger.kernel.org, Srinivas Kandagatla Subject: [PATCH 10/12] ARM: dts: dragonboard-600c: Add on board leds support Date: Wed, 23 Mar 2016 19:48:04 +0000 Message-Id: <1458762484-9768-1-git-send-email-srinivas.kandagatla@linaro.org> X-Mailer: git-send-email 2.5.0 In-Reply-To: <1458762366-9233-1-git-send-email-srinivas.kandagatla@linaro.org> References: <1458762366-9233-1-git-send-email-srinivas.kandagatla@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2372 Lines: 103 This patch adds support to 4 user leds, wlan and bt led on board. Signed-off-by: Srinivas Kandagatla --- .../arm/boot/dts/qcom-apq8064-dragonboard-600c.dts | 76 ++++++++++++++++++++++ 1 file changed, 76 insertions(+) diff --git a/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts b/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts index 52f742c..4fecd94 100644 --- a/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts +++ b/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts @@ -53,6 +53,33 @@ bias-disable; }; }; + + user_leds: user_leds { + mux { + pins = "gpio3", "gpio7", "gpio10", "gpio11"; + function = "gpio"; + }; + + conf { + pins = "gpio3", "gpio7", "gpio10", "gpio11"; + function = "gpio"; + output-low; + }; + }; + }; + + qcom,ssbi@500000 { + pmic@0 { + mpps@50 { + mpp_leds: mpp_leds { + pinconf { + pins = "mpp7", "mpp8"; + function = "digital"; + output-low; + }; + }; + }; + }; }; rpm@108000 { @@ -165,6 +192,55 @@ }; }; + leds { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds>, <&mpp_leds>; + + compatible = "gpio-leds"; + + led@1 { + label = "dragonboard-600c:green:user1"; + gpios = <&tlmm_pinmux 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led@2 { + label = "dragonboard-600c:green:user2"; + gpios = <&tlmm_pinmux 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@3 { + label = "dragonboard-600c:green:user3"; + gpios = <&tlmm_pinmux 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + led@4 { + label = "apq8016-sbc:green:user4"; + gpios = <&tlmm_pinmux 11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + }; + + led@5 { + label = "dragonboard-600c:yellow:wlan"; + gpios = <&pm8921_mpps 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "wlan"; + default-state = "off"; + }; + + led@6 { + label = "dragonboard-600c:blue:bt"; + gpios = <&pm8921_mpps 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bt"; + default-state = "off"; + }; + }; + pci@1b500000 { status = "okay"; vdda-supply = <&pm8921_s3>; -- 2.5.0