Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752220AbcCXXxf (ORCPT ); Thu, 24 Mar 2016 19:53:35 -0400 Received: from vern.gendns.com ([50.115.127.205]:42109 "EHLO vern.gendns.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1751163AbcCXXxY (ORCPT ); Thu, 24 Mar 2016 19:53:24 -0400 From: David Lechner Cc: petr@barix.com, sergei.shtylyov@cogentembedded.com, David.Laight@ACULAB.COM, David Lechner , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Russell King , Sekhar Nori , Kevin Hilman , Kishon Vijay Abraham I , Greg Kroah-Hartman , Alan Stern , Bin Liu , Lee Jones , devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS), linux-kernel@vger.kernel.org (open list), linux-arm-kernel@lists.infradead.org (moderated list:ARM PORT), linux-usb@vger.kernel.org (open list:USB SUBSYSTEM) Subject: [PATCH v3 01/16] dt: davinci: use proper address after @ Date: Thu, 24 Mar 2016 18:51:26 -0500 Message-Id: <1458863503-31121-2-git-send-email-david@lechnology.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1458863503-31121-1-git-send-email-david@lechnology.com> References: <1458863503-31121-1-git-send-email-david@lechnology.com> X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - vern.gendns.com X-AntiAbuse: Original Domain - vger.kernel.org X-AntiAbuse: Originator/Caller UID/GID - [47 12] / [47 12] X-AntiAbuse: Sender Address Domain - lechnology.com X-Get-Message-Sender-Via: vern.gendns.com: authenticated_id: davidmain+lechnology.com/only user confirmed/virtual account not confirmed X-Authenticated-Sender: vern.gendns.com: davidmain@lechnology.com X-Source: X-Source-Args: X-Source-Dir: To: unlisted-recipients:; (no To-header on input) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 8143 Lines: 337 TI has been using the physical address in DT after the @ in device nodes. The device tree convention is to use the same address that is used for the reg property. This updates all davinci DT files to use the proper convention. Signed-off-by: David Lechner --- v3 changes: This is a new patch. arch/arm/boot/dts/da850-enbw-cmc.dts | 8 +++--- arch/arm/boot/dts/da850-evm.dts | 26 +++++++++--------- arch/arm/boot/dts/da850.dtsi | 52 ++++++++++++++++++------------------ 3 files changed, 43 insertions(+), 43 deletions(-) diff --git a/arch/arm/boot/dts/da850-enbw-cmc.dts b/arch/arm/boot/dts/da850-enbw-cmc.dts index 645549e..101d1a1 100644 --- a/arch/arm/boot/dts/da850-enbw-cmc.dts +++ b/arch/arm/boot/dts/da850-enbw-cmc.dts @@ -16,14 +16,14 @@ compatible = "enbw,cmc", "ti,da850"; model = "EnBW CMC"; - soc { - serial0: serial@1c42000 { + soc@1c00000 { + serial0: serial@42000 { status = "okay"; }; - serial1: serial@1d0c000 { + serial1: serial@10c000 { status = "okay"; }; - serial2: serial@1d0d000 { + serial2: serial@10d000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index ef061e9..1a15db8 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -14,8 +14,8 @@ compatible = "ti,da850-evm", "ti,da850"; model = "DA850/AM1808/OMAP-L138 EVM"; - soc { - pmx_core: pinmux@1c14120 { + soc@1c00000 { + pmx_core: pinmux@14120 { status = "okay"; mcasp0_pins: pinmux_mcasp0_pins { @@ -30,19 +30,19 @@ >; }; }; - serial0: serial@1c42000 { + serial0: serial@42000 { status = "okay"; }; - serial1: serial@1d0c000 { + serial1: serial@10c000 { status = "okay"; }; - serial2: serial@1d0d000 { + serial2: serial@10d000 { status = "okay"; }; - rtc0: rtc@1c23000 { + rtc0: rtc@23000 { status = "okay"; }; - i2c0: i2c@1c22000 { + i2c0: i2c@22000 { status = "okay"; clock-frequency = <100000>; pinctrl-names = "default"; @@ -66,17 +66,17 @@ }; }; - wdt: wdt@1c21000 { + wdt: wdt@21000 { status = "okay"; }; - mmc0: mmc@1c40000 { + mmc0: mmc@40000 { max-frequency = <50000000>; bus-width = <4>; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; }; - spi1: spi@1f0e000 { + spi1: spi@30e000 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&spi1_pins &spi1_cs0_pin>; @@ -116,18 +116,18 @@ }; }; }; - mdio: mdio@1e24000 { + mdio: mdio@224000 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mdio_pins>; bus_freq = <2200000>; }; - eth0: ethernet@1e20000 { + eth0: ethernet@220000 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mii_pins>; }; - gpio: gpio@1e26000 { + gpio: gpio@226000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 226cda7..4294849 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -15,7 +15,7 @@ #address-cells = <1>; #size-cells = <1>; ranges; - intc: interrupt-controller { + intc: interrupt-controller@fffee000 { compatible = "ti,cp-intc"; interrupt-controller; #interrupt-cells = <1>; @@ -23,7 +23,7 @@ reg = <0xfffee000 0x2000>; }; }; - soc { + soc@1c00000 { compatible = "simple-bus"; model = "da850"; #address-cells = <1>; @@ -31,7 +31,7 @@ ranges = <0x0 0x01c00000 0x400000>; interrupt-parent = <&intc>; - pmx_core: pinmux@1c14120 { + pmx_core: pinmux@14120 { compatible = "pinctrl-single"; reg = <0x14120 0x50>; #address-cells = <1>; @@ -150,7 +150,7 @@ }; }; - edma0: edma@01c00000 { + edma0: edma@0 { compatible = "ti,edma3-tpcc"; /* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */ reg = <0x0 0x8000>; @@ -161,19 +161,19 @@ ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>; }; - edma0_tptc0: tptc@01c08000 { + edma0_tptc0: tptc@8000 { compatible = "ti,edma3-tptc"; reg = <0x8000 0x400>; interrupts = <13>; interrupt-names = "edm3_tcerrint"; }; - edma0_tptc1: tptc@01c08400 { + edma0_tptc1: tptc@8400 { compatible = "ti,edma3-tptc"; reg = <0x8400 0x400>; interrupts = <32>; interrupt-names = "edm3_tcerrint"; }; - edma1: edma@01e30000 { + edma1: edma@230000 { compatible = "ti,edma3-tpcc"; /* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */ reg = <0x230000 0x8000>; @@ -184,41 +184,41 @@ ti,tptcs = <&edma1_tptc0 7>; }; - edma1_tptc0: tptc@01e38000 { + edma1_tptc0: tptc@238000 { compatible = "ti,edma3-tptc"; reg = <0x238000 0x400>; interrupts = <95>; interrupt-names = "edm3_tcerrint"; }; - serial0: serial@1c42000 { + serial0: serial@42000 { compatible = "ns16550a"; reg = <0x42000 0x100>; reg-shift = <2>; interrupts = <25>; status = "disabled"; }; - serial1: serial@1d0c000 { + serial1: serial@10c000 { compatible = "ns16550a"; reg = <0x10c000 0x100>; reg-shift = <2>; interrupts = <53>; status = "disabled"; }; - serial2: serial@1d0d000 { + serial2: serial@10d000 { compatible = "ns16550a"; reg = <0x10d000 0x100>; reg-shift = <2>; interrupts = <61>; status = "disabled"; }; - rtc0: rtc@1c23000 { + rtc0: rtc@23000 { compatible = "ti,da830-rtc"; reg = <0x23000 0x1000>; interrupts = <19 19>; status = "disabled"; }; - i2c0: i2c@1c22000 { + i2c0: i2c@22000 { compatible = "ti,davinci-i2c"; reg = <0x22000 0x1000>; interrupts = <15>; @@ -226,12 +226,12 @@ #size-cells = <0>; status = "disabled"; }; - wdt: wdt@1c21000 { + wdt: wdt@21000 { compatible = "ti,davinci-wdt"; reg = <0x21000 0x1000>; status = "disabled"; }; - mmc0: mmc@1c40000 { + mmc0: mmc@40000 { compatible = "ti,da830-mmc"; reg = <0x40000 0x1000>; interrupts = <16>; @@ -239,7 +239,7 @@ dma-names = "rx", "tx"; status = "disabled"; }; - mmc1: mmc@1e1b000 { + mmc1: mmc@21b000 { compatible = "ti,da830-mmc"; reg = <0x21b000 0x1000>; interrupts = <72>; @@ -247,37 +247,37 @@ dma-names = "rx", "tx"; status = "disabled"; }; - ehrpwm0: ehrpwm@01f00000 { + ehrpwm0: ehrpwm@300000 { compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x300000 0x2000>; status = "disabled"; }; - ehrpwm1: ehrpwm@01f02000 { + ehrpwm1: ehrpwm@302000 { compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x302000 0x2000>; status = "disabled"; }; - ecap0: ecap@01f06000 { + ecap0: ecap@306000 { compatible = "ti,da850-ecap", "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x306000 0x80>; status = "disabled"; }; - ecap1: ecap@01f07000 { + ecap1: ecap@307000 { compatible = "ti,da850-ecap", "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x307000 0x80>; status = "disabled"; }; - ecap2: ecap@01f08000 { + ecap2: ecap@308000 { compatible = "ti,da850-ecap", "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x308000 0x80>; status = "disabled"; }; - spi1: spi@1f0e000 { + spi1: spi@30e000 { #address-cells = <1>; #size-cells = <0>; compatible = "ti,da830-spi"; @@ -289,13 +289,13 @@ dma-names = "rx", "tx"; status = "disabled"; }; - mdio: mdio@1e24000 { + mdio: mdio@224000 { compatible = "ti,davinci_mdio"; #address-cells = <1>; #size-cells = <0>; reg = <0x224000 0x1000>; }; - eth0: ethernet@1e20000 { + eth0: ethernet@220000 { compatible = "ti,davinci-dm6467-emac"; reg = <0x220000 0x4000>; ti,davinci-ctrl-reg-offset = <0x3000>; @@ -309,7 +309,7 @@ 36 >; }; - gpio: gpio@1e26000 { + gpio: gpio@226000 { compatible = "ti,dm6441-gpio"; gpio-controller; reg = <0x226000 0x1000>; @@ -323,7 +323,7 @@ status = "disabled"; }; - mcasp0: mcasp@01d00000 { + mcasp0: mcasp@100000 { compatible = "ti,da830-mcasp-audio"; reg = <0x100000 0x2000>, <0x102000 0x400000>; -- 1.9.1