Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754693AbcCYVfz (ORCPT ); Fri, 25 Mar 2016 17:35:55 -0400 Received: from mail-pf0-f174.google.com ([209.85.192.174]:36619 "EHLO mail-pf0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754656AbcCYVfw (ORCPT ); Fri, 25 Mar 2016 17:35:52 -0400 From: Stephen Boyd To: Greg Kroah-Hartman Cc: linux-arm@lists.infradead.org, linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org, linux-arm-msm@vger.kernel.org, "Ivan T. Ivanov" , Srinivas Kandagatla , Andy Gross , Matthew McClintock Subject: [PATCH] tty: serial: msm: Support more bauds Date: Fri, 25 Mar 2016 14:35:49 -0700 Message-Id: <1458941749-5705-1-git-send-email-stephen.boyd@linaro.org> X-Mailer: git-send-email 2.8.0.rc4 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 6256 Lines: 186 The msm_find_best_baud() function is written with the assumption that the port->uartclk rate is fixed to a particular rate at boot time, but now this driver changes that clk rate at runtime when the baud is changed. The way the hardware works is that an input clk rate comes from the clk controller into the uart hw block. That rate is typically 1843200 or 3686400 Hz. That rate can then be divided by an internal divider in the hw block to achieve a particular baud on the serial wire. msm_find_best_baud() is looking for that divider value. A few things are wrong with the way the code is written. First, it assumes that the maximum baud that the uart can support if the clk rate is fixed at boot is 460800, which would correspond to an input clk rate of 230400 * 16 == 3686400 Hz. Except some devices have a boot rate of 1843200 Hz or max baud of 115200, so achieving 230400 on those devices doesn't work at all because we don't increase the clk rate unless max baud is 460800. Second, we can't achieve bauds higher than 460800 that require anything besides a divisor of 1, because we always call msm_find_best_baud() with a fixed port->uartclk rate that will eventually be changed after we calculate the divisor. So if we need to get a baud of 500000, we'll just multiply that by 16 and hope that the clk can give us 500000 * 16 == 8000000 Hz, which it typically can't do. To really achieve 500000 baud, we need to get an input clk rate of 24000000 Hz and then divide that by 3 inside the uart hardware. Finally, we return success for bauds even when we can't actually achieve them. This means that when the user asks for 500000 baud, we actually get 921600 right now, but the user doesn't know that. Fix all of this by searching through the divisor and clk rate space with a combination of clk_round_rate() and baud calculations, keeping track of the best clk rate and divisor we find if we can't get an exact match. Typically we can get an exact match with a divisor of 1, but sometimes we need to keep track and try more frequencies. On my msm8916 device, this results in all standard bauds in baud_table being supported except for 1800, 576000, 1152000, and 4000000. Fixes: 850b37a71bde ("tty: serial: msm: Remove 115.2 Kbps maximum baud rate limitation") Cc: "Ivan T. Ivanov" Cc: Srinivas Kandagatla Cc: Andy Gross Cc: Matthew McClintock Signed-off-by: Stephen Boyd --- drivers/tty/serial/msm_serial.c | 99 +++++++++++++++++++++++++++-------------- 1 file changed, 66 insertions(+), 33 deletions(-) diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index 96d3ce8dc2dc..3d28be85bd46 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -861,37 +861,72 @@ struct msm_baud_map { }; static const struct msm_baud_map * -msm_find_best_baud(struct uart_port *port, unsigned int baud) +msm_find_best_baud(struct uart_port *port, unsigned int baud, + unsigned long *rate) { - unsigned int i, divisor; - const struct msm_baud_map *entry; + struct msm_port *msm_port = UART_TO_MSM(port); + unsigned int divisor, result; + unsigned long target, old, best_rate = 0, diff, best_diff = ULONG_MAX; + const struct msm_baud_map *entry, *end, *best; static const struct msm_baud_map table[] = { - { 1536, 0x00, 1 }, - { 768, 0x11, 1 }, - { 384, 0x22, 1 }, - { 192, 0x33, 1 }, - { 96, 0x44, 1 }, - { 48, 0x55, 1 }, - { 32, 0x66, 1 }, - { 24, 0x77, 1 }, - { 16, 0x88, 1 }, - { 12, 0x99, 6 }, - { 8, 0xaa, 6 }, - { 6, 0xbb, 6 }, - { 4, 0xcc, 6 }, - { 3, 0xdd, 8 }, - { 2, 0xee, 16 }, { 1, 0xff, 31 }, - { 0, 0xff, 31 }, + { 2, 0xee, 16 }, + { 3, 0xdd, 8 }, + { 4, 0xcc, 6 }, + { 6, 0xbb, 6 }, + { 8, 0xaa, 6 }, + { 12, 0x99, 6 }, + { 16, 0x88, 1 }, + { 24, 0x77, 1 }, + { 32, 0x66, 1 }, + { 48, 0x55, 1 }, + { 96, 0x44, 1 }, + { 192, 0x33, 1 }, + { 384, 0x22, 1 }, + { 768, 0x11, 1 }, + { 1536, 0x00, 1 }, }; - divisor = uart_get_divisor(port, baud); + best = table; /* Default to smallest divider */ + target = clk_round_rate(msm_port->clk, 16 * baud); + divisor = DIV_ROUND_CLOSEST(target, 16 * baud); + + end = table + ARRAY_SIZE(table); + entry = table; + while (entry < end) { + if (entry->divisor <= divisor) { + result = target / entry->divisor / 16; + diff = abs(result - baud); + + /* Keep track of best entry */ + if (diff < best_diff) { + best_diff = diff; + best = entry; + best_rate = target; + } - for (i = 0, entry = table; i < ARRAY_SIZE(table); i++, entry++) - if (entry->divisor <= divisor) - break; + if (result == baud) + break; + } else if (entry->divisor > divisor) { + old = target; + target = clk_round_rate(msm_port->clk, old + 1); + /* + * The rate didn't get any faster so we can't do + * better at dividing it down + */ + if (target == old) + break; + + /* Start the divisor search over at this new rate */ + entry = table; + divisor = DIV_ROUND_CLOSEST(target, 16 * baud); + continue; + } + entry++; + } - return entry; /* Default to smallest divider */ + *rate = best_rate; + return best; } static int msm_set_baud_rate(struct uart_port *port, unsigned int baud, @@ -900,22 +935,20 @@ static int msm_set_baud_rate(struct uart_port *port, unsigned int baud, unsigned int rxstale, watermark, mask; struct msm_port *msm_port = UART_TO_MSM(port); const struct msm_baud_map *entry; - unsigned long flags; - - entry = msm_find_best_baud(port, baud); - - msm_write(port, entry->code, UART_CSR); - - if (baud > 460800) - port->uartclk = baud * 16; + unsigned long flags, rate; flags = *saved_flags; spin_unlock_irqrestore(&port->lock, flags); - clk_set_rate(msm_port->clk, port->uartclk); + entry = msm_find_best_baud(port, baud, &rate); + clk_set_rate(msm_port->clk, rate); + baud = rate / 16 / entry->divisor; spin_lock_irqsave(&port->lock, flags); *saved_flags = flags; + port->uartclk = rate; + + msm_write(port, entry->code, UART_CSR); /* RX stale watermark */ rxstale = entry->rxstale; -- 2.8.0.rc4