Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753390AbcC0SFe (ORCPT ); Sun, 27 Mar 2016 14:05:34 -0400 Received: from mail-cys01nam02on0086.outbound.protection.outlook.com ([104.47.37.86]:36192 "EHLO NAM02-CY1-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1752632AbcC0SFU (ORCPT ); Sun, 27 Mar 2016 14:05:20 -0400 Authentication-Results: spf=pass (sender IP is 149.199.60.83) smtp.mailfrom=xilinx.com; vger.kernel.org; dkim=none (message not signed) header.d=none;vger.kernel.org; dmarc=bestguesspass action=none header.from=xilinx.com; From: Kedareswara rao Appana To: , , , , , , , , , CC: , , Subject: [PATCH v2 4/6] dmaengine: vdma: Add Support for Xilinx AXI Direct Memory Access Engine Date: Sun, 27 Mar 2016 23:35:07 +0530 Message-ID: <1459101907-9756-4-git-send-email-appanad@xilinx.com> X-Mailer: git-send-email 2.1.2 In-Reply-To: <1459101907-9756-1-git-send-email-appanad@xilinx.com> References: <1459101907-9756-1-git-send-email-appanad@xilinx.com> X-RCIS-Action: ALLOW X-TM-AS-Product-Ver: IMSS-7.1.0.1224-8.0.0.1202-22222.005 X-TM-AS-User-Approved-Sender: Yes;Yes X-EOPAttributedMessage: 0 X-Forefront-Antispam-Report: CIP:149.199.60.83;IPV:NLI;CTRY:US;EFV:NLI;SFV:NSPM;SFS:(10009020)(6009001)(2980300002)(438002)(189002)(199003)(42186005)(90966002)(2201001)(45336002)(5008740100001)(551934003)(86362001)(87936001)(106466001)(50986999)(6806005)(2906002)(5003940100001)(11100500001)(52956003)(50466002)(46386002)(81166005)(4326007)(48376002)(76176999)(586003)(47776003)(5001770100001)(63266004)(2950100001)(19580405001)(50226001)(19580395003)(1096002)(229853001)(1220700001)(92566002)(575784001)(189998001)(36756003)(103686003)(33646002)(107986001)(921003)(2004002)(1121003)(83996005)(2101003);DIR:OUT;SFP:1101;SCL:1;SRVR:BL2NAM02HT087;H:xsj-pvapsmtpgw01;FPR:;SPF:Pass;MLV:sfv;MX:1;A:1;LANG:en; MIME-Version: 1.0 Content-Type: text/plain X-MS-Office365-Filtering-Correlation-Id: 89f6a991-5091-438c-ae5d-08d3566a5a54 X-Microsoft-Antispam: UriScan:;BCL:0;PCL:0;RULEID:(8251501002);SRVR:BL2NAM02HT087; X-Microsoft-Antispam-PRVS: <7ce7167bf5074851b00ad5829c4a7e2c@BL2NAM02HT087.eop-nam02.prod.protection.outlook.com> X-Exchange-Antispam-Report-Test: UriScan:; X-Exchange-Antispam-Report-CFA-Test: BCL:0;PCL:0;RULEID:(601004)(2401047)(13015025)(13018025)(13023025)(13017025)(8121501046)(13024025)(5005006)(3002001)(10201501046);SRVR:BL2NAM02HT087;BCL:0;PCL:0;RULEID:;SRVR:BL2NAM02HT087; X-Forefront-PRVS: 089473E5FE X-OriginatorOrg: xilinx.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 27 Mar 2016 18:05:16.7955 (UTC) X-MS-Exchange-CrossTenant-Id: 657af505-d5df-48d0-8300-c31994686c5c X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=657af505-d5df-48d0-8300-c31994686c5c;Ip=[149.199.60.83];Helo=[xsj-pvapsmtpgw01] X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: BL2NAM02HT087 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 23428 Lines: 740 This patch adds support for the AXI Direct Memory Access (AXI DMA) core in the existing vdma driver, AXI DMA Core is a soft Xilinx IP core that provides high-bandwidth direct memory access between memory and AXI4-Stream type target peripherals. Signed-off-by: Kedareswara rao Appana --- Changes for v2: ---> have differenet structures for h/w desc. ---> Added comments to the relevant sections as suggested by Laurent Pinchart. ---> Fixed trival code clean up/spacing issues as suggested by Laurent Pinchart. drivers/dma/xilinx/xilinx_vdma.c | 474 +++++++++++++++++++++++++++++++++++---- include/linux/dma/xilinx_dma.h | 12 + 2 files changed, 444 insertions(+), 42 deletions(-) diff --git a/drivers/dma/xilinx/xilinx_vdma.c b/drivers/dma/xilinx/xilinx_vdma.c index 04fd8f5..3268415 100644 --- a/drivers/dma/xilinx/xilinx_vdma.c +++ b/drivers/dma/xilinx/xilinx_vdma.c @@ -16,6 +16,11 @@ * video device (S2MM). Initialization, status, interrupt and management * registers are accessed through an AXI4-Lite slave interface. * + * The AXI Direct Memory Access (AXI DMA) core is a soft Xilinx IP core that + * provides high-bandwidth one dimensional direct memory access between memory + * and AXI4-Stream target peripherals. It supports one receive and one + * transmit channel, both of them optional at synthesis time. + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 2 of the License, or @@ -140,6 +145,19 @@ /* Delay loop counter to prevent hardware failure */ #define XILINX_DMA_LOOP_COUNT 1000000 +/* AXI DMA Specific Registers/Offsets */ +#define XILINX_DMA_REG_SRCDSTADDR 0x18 +#define XILINX_DMA_REG_BTT 0x28 + +/* AXI DMA Specific Masks/Bit fields */ +#define XILINX_DMA_MAX_TRANS_LEN GENMASK(22, 0) +#define XILINX_DMA_CR_COALESCE_MAX GENMASK(23, 16) +#define XILINX_DMA_CR_COALESCE_SHIFT 16 +#define XILINX_DMA_BD_SOP BIT(27) +#define XILINX_DMA_BD_EOP BIT(26) +#define XILINX_DMA_COALESCE_MAX 255 +#define XILINX_DMA_NUM_APP_WORDS 5 + /** * struct xilinx_vdma_desc_hw - Hardware Descriptor * @next_desc: Next Descriptor Pointer @0x00 @@ -162,6 +180,30 @@ struct xilinx_vdma_desc_hw { } __aligned(64); /** + * struct xilinx_axidma_desc_hw - Hardware Descriptor for AXI DMA + * @next_desc: Next Descriptor Pointer @0x00 + * @pad1: Reserved @0x04 + * @buf_addr: Buffer address @0x08 + * @pad2: Reserved @0x0C + * @pad3: Reserved @0x10 + * @pad4: Reserved @0x14 + * @control: Control field @0x18 + * @status: Status field @0x1C + * @app: APP Fields @0x20 - 0x30 + */ +struct xilinx_axidma_desc_hw { + u32 next_desc; + u32 pad1; + u32 buf_addr; + u32 pad2; + u32 pad3; + u32 pad4; + u32 control; + u32 status; + u32 app[XILINX_DMA_NUM_APP_WORDS]; +} __aligned(64); + +/** * struct xilinx_vdma_tx_segment - Descriptor segment * @hw: Hardware descriptor * @node: Node in the descriptor segments list @@ -174,6 +216,18 @@ struct xilinx_vdma_tx_segment { } __aligned(64); /** + * struct xilinx_axidma_tx_segment - Descriptor segment + * @hw: Hardware descriptor + * @node: Node in the descriptor segments list + * @phys: Physical address of segment + */ +struct xilinx_axidma_tx_segment { + struct xilinx_axidma_desc_hw hw; + struct list_head node; + dma_addr_t phys; +} __aligned(64); + +/** * struct xilinx_dma_tx_descriptor - Per Transaction structure * @async_tx: Async transaction descriptor * @segments: TX segments list @@ -210,6 +264,9 @@ struct xilinx_dma_tx_descriptor { * @desc_pendingcount: Descriptor pending count * @ext_addr: Indicates 64 bit addressing is supported by dma channel * @desc_submitcount: Descriptor h/w submitted count + * @residue: Residue for AXI DMA + * @seg_v: Statically allocated segments base + * @start_transfer: Differentiate b/w DMA IP's transfer */ struct xilinx_dma_chan { struct xilinx_dma_device *xdev; @@ -235,6 +292,9 @@ struct xilinx_dma_chan { u32 desc_pendingcount; bool ext_addr; u32 desc_submitcount; + u32 residue; + struct xilinx_axidma_tx_segment *seg_v; + void (*start_transfer)(struct xilinx_dma_chan *chan); }; /** @@ -246,6 +306,7 @@ struct xilinx_dma_chan { * @has_sg: Specifies whether Scatter-Gather is present or not * @flush_on_fsync: Flush on frame sync * @ext_addr: Indicates 64 bit addressing is supported by dma device + * @dmatype: DMA ip type */ struct xilinx_dma_device { void __iomem *regs; @@ -255,6 +316,7 @@ struct xilinx_dma_device { bool has_sg; u32 flush_on_fsync; bool ext_addr; + enum xdma_ip_type dmatype; }; /* Macros */ @@ -354,6 +416,39 @@ xilinx_vdma_alloc_tx_segment(struct xilinx_dma_chan *chan) } /** + * xilinx_axidma_alloc_tx_segment - Allocate transaction segment + * @chan: Driver specific DMA channel + * + * Return: The allocated segment on success and NULL on failure. + */ +static struct xilinx_axidma_tx_segment * +xilinx_axidma_alloc_tx_segment(struct xilinx_dma_chan *chan) +{ + struct xilinx_axidma_tx_segment *segment; + dma_addr_t phys; + + segment = dma_pool_alloc(chan->desc_pool, GFP_ATOMIC, &phys); + if (!segment) + return NULL; + + memset(segment, 0, sizeof(*segment)); + segment->phys = phys; + + return segment; +} + +/** + * xilinx_dma_free_tx_segment - Free transaction segment + * @chan: Driver specific DMA channel + * @segment: DMA transaction segment + */ +static void xilinx_dma_free_tx_segment(struct xilinx_dma_chan *chan, + struct xilinx_axidma_tx_segment *segment) +{ + dma_pool_free(chan->desc_pool, segment, segment->phys); +} + +/** * xilinx_vdma_free_tx_segment - Free transaction segment * @chan: Driver specific DMA channel * @segment: DMA transaction segment @@ -394,13 +489,22 @@ xilinx_dma_free_tx_descriptor(struct xilinx_dma_chan *chan, struct xilinx_dma_tx_descriptor *desc) { struct xilinx_vdma_tx_segment *segment, *next; + struct xilinx_axidma_tx_segment *axidma_segment, *axidma_next; if (!desc) return; - list_for_each_entry_safe(segment, next, &desc->segments, node) { - list_del(&segment->node); - xilinx_vdma_free_tx_segment(chan, segment); + if (chan->xdev->dmatype == XDMA_TYPE_VDMA) { + list_for_each_entry_safe(segment, next, &desc->segments, node) { + list_del(&segment->node); + xilinx_vdma_free_tx_segment(chan, segment); + } + } else { + list_for_each_entry_safe(axidma_segment, axidma_next, + &desc->segments, node) { + list_del(&axidma_segment->node); + xilinx_dma_free_tx_segment(chan, axidma_segment); + } } kfree(desc); @@ -452,6 +556,8 @@ static void xilinx_dma_free_chan_resources(struct dma_chan *dchan) dev_dbg(chan->dev, "Free all channel resources.\n"); xilinx_dma_free_descriptors(chan); + if (chan->xdev->dmatype == XDMA_TYPE_AXIDMA) + xilinx_dma_free_tx_segment(chan, chan->seg_v); dma_pool_destroy(chan->desc_pool); chan->desc_pool = NULL; } @@ -520,10 +626,20 @@ static int xilinx_dma_alloc_chan_resources(struct dma_chan *dchan) * We need the descriptor to be aligned to 64bytes * for meeting Xilinx VDMA specification requirement. */ - chan->desc_pool = dma_pool_create("xilinx_vdma_desc_pool", - chan->dev, - sizeof(struct xilinx_vdma_tx_segment), - __alignof__(struct xilinx_vdma_tx_segment), 0); + if (chan->xdev->dmatype == XDMA_TYPE_AXIDMA) { + chan->desc_pool = dma_pool_create("xilinx_dma_desc_pool", + chan->dev, + sizeof(struct xilinx_axidma_tx_segment), + __alignof__(struct xilinx_axidma_tx_segment), + 0); + } else { + chan->desc_pool = dma_pool_create("xilinx_vdma_desc_pool", + chan->dev, + sizeof(struct xilinx_vdma_tx_segment), + __alignof__(struct xilinx_vdma_tx_segment), + 0); + } + if (!chan->desc_pool) { dev_err(chan->dev, "unable to allocate channel %d descriptor pool\n", @@ -531,7 +647,27 @@ static int xilinx_dma_alloc_chan_resources(struct dma_chan *dchan) return -ENOMEM; } + if (chan->xdev->dmatype == XDMA_TYPE_AXIDMA) + /* + * For AXI DMA case after submitting a pending_list, keep + * an extra segment allocated so that the "next descriptor" + * pointer on the tail descriptor always points to a + * valid descriptor, even when paused after reaching taildesc. + * This way, it is possible to issue additional + * transfers without halting and restarting the channel. + */ + chan->seg_v = xilinx_axidma_alloc_tx_segment(chan); + dma_cookie_init(dchan); + + if (chan->xdev->dmatype == XDMA_TYPE_AXIDMA) { + /* For AXI DMA resetting once channel will reset the + * other channel as well so enable the interrupts here. + */ + dma_ctrl_set(chan, XILINX_DMA_REG_DMACR, + XILINX_DMA_DMAXR_ALL_IRQ_MASK); + } + return 0; } @@ -547,7 +683,37 @@ static enum dma_status xilinx_dma_tx_status(struct dma_chan *dchan, dma_cookie_t cookie, struct dma_tx_state *txstate) { - return dma_cookie_status(dchan, cookie, txstate); + struct xilinx_dma_chan *chan = to_xilinx_chan(dchan); + struct xilinx_dma_tx_descriptor *desc; + struct xilinx_axidma_tx_segment *segment; + struct xilinx_axidma_desc_hw *hw; + enum dma_status ret; + unsigned long flags; + u32 residue = 0; + + ret = dma_cookie_status(dchan, cookie, txstate); + if (ret == DMA_COMPLETE || !txstate) + return ret; + + if (chan->xdev->dmatype == XDMA_TYPE_AXIDMA) { + spin_lock_irqsave(&chan->lock, flags); + + desc = list_last_entry(&chan->active_list, + struct xilinx_dma_tx_descriptor, node); + if (chan->has_sg) { + list_for_each_entry(segment, &desc->segments, node) { + hw = &segment->hw; + residue += (hw->control - hw->status) & + XILINX_DMA_MAX_TRANS_LEN; + } + } + spin_unlock_irqrestore(&chan->lock, flags); + + chan->residue = residue; + dma_set_residue(txstate, chan->residue); + } + + return ret; } /** @@ -755,6 +921,91 @@ static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan) } /** + * xilinx_dma_start_transfer - Starts DMA transfer + * @chan: Driver specific channel struct pointer + */ +static void xilinx_dma_start_transfer(struct xilinx_dma_chan *chan) +{ + struct xilinx_dma_tx_descriptor *head_desc, *tail_desc; + struct xilinx_axidma_tx_segment *tail_segment, *old_head, *new_head; + u32 reg; + + if (chan->err) + return; + + if (list_empty(&chan->pending_list)) + return; + + /* If it is SG mode and hardware is busy, cannot submit */ + if (chan->has_sg && xilinx_dma_is_running(chan) && + !xilinx_dma_is_idle(chan)) { + dev_dbg(chan->dev, "DMA controller still busy\n"); + return; + } + + head_desc = list_first_entry(&chan->pending_list, + struct xilinx_dma_tx_descriptor, node); + tail_desc = list_last_entry(&chan->pending_list, + struct xilinx_dma_tx_descriptor, node); + tail_segment = list_last_entry(&tail_desc->segments, + struct xilinx_axidma_tx_segment, node); + + old_head = list_first_entry(&head_desc->segments, + struct xilinx_axidma_tx_segment, node); + new_head = chan->seg_v; + /* Copy Buffer Descriptor fields. */ + new_head->hw = old_head->hw; + + /* Swap and save new reserve */ + list_replace_init(&old_head->node, &new_head->node); + chan->seg_v = old_head; + + tail_segment->hw.next_desc = chan->seg_v->phys; + head_desc->async_tx.phys = new_head->phys; + + reg = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR); + + if (chan->desc_pendingcount <= XILINX_DMA_COALESCE_MAX) { + reg &= ~XILINX_DMA_CR_COALESCE_MAX; + reg |= chan->desc_pendingcount << + XILINX_DMA_CR_COALESCE_SHIFT; + dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg); + } + + if (chan->has_sg) + dma_ctrl_write(chan, XILINX_DMA_REG_CURDESC, + head_desc->async_tx.phys); + + xilinx_dma_start(chan); + + if (chan->err) + return; + + /* Start the transfer */ + if (chan->has_sg) { + dma_ctrl_write(chan, XILINX_DMA_REG_TAILDESC, + tail_segment->phys); + } else { + struct xilinx_axidma_tx_segment *segment; + struct xilinx_axidma_desc_hw *hw; + + segment = list_first_entry(&head_desc->segments, + struct xilinx_axidma_tx_segment, + node); + hw = &segment->hw; + + dma_ctrl_write(chan, XILINX_DMA_REG_SRCDSTADDR, hw->buf_addr); + + /* Start the transfer */ + dma_ctrl_write(chan, XILINX_DMA_REG_BTT, + hw->control & XILINX_DMA_MAX_TRANS_LEN); + } + + list_splice_tail_init(&chan->pending_list, &chan->active_list); + chan->desc_pendingcount = 0; +} + +/** * xilinx_dma_issue_pending - Issue pending transactions * @dchan: DMA channel */ @@ -764,7 +1015,7 @@ static void xilinx_dma_issue_pending(struct dma_chan *dchan) unsigned long flags; spin_lock_irqsave(&chan->lock, flags); - xilinx_vdma_start_transfer(chan); + chan->start_transfer(chan); spin_unlock_irqrestore(&chan->lock, flags); } @@ -896,7 +1147,7 @@ static irqreturn_t xilinx_dma_irq_handler(int irq, void *data) if (status & XILINX_DMA_DMASR_FRM_CNT_IRQ) { spin_lock(&chan->lock); xilinx_dma_complete_descriptor(chan); - xilinx_vdma_start_transfer(chan); + chan->start_transfer(chan); spin_unlock(&chan->lock); } @@ -914,6 +1165,7 @@ static void append_desc_queue(struct xilinx_dma_chan *chan, { struct xilinx_vdma_tx_segment *tail_segment; struct xilinx_dma_tx_descriptor *tail_desc; + struct xilinx_axidma_tx_segment *axidma_tail_segment; if (list_empty(&chan->pending_list)) goto append; @@ -924,9 +1176,17 @@ static void append_desc_queue(struct xilinx_dma_chan *chan, */ tail_desc = list_last_entry(&chan->pending_list, struct xilinx_dma_tx_descriptor, node); - tail_segment = list_last_entry(&tail_desc->segments, - struct xilinx_vdma_tx_segment, node); - tail_segment->hw.next_desc = (u32)desc->async_tx.phys; + if (chan->xdev->dmatype == XDMA_TYPE_VDMA) { + tail_segment = list_last_entry(&tail_desc->segments, + struct xilinx_vdma_tx_segment, + node); + tail_segment->hw.next_desc = (u32)desc->async_tx.phys; + } else { + axidma_tail_segment = list_last_entry(&tail_desc->segments, + struct xilinx_axidma_tx_segment, + node); + axidma_tail_segment->hw.next_desc = (u32)desc->async_tx.phys; + } /* * Add the software descriptor and all children to the list @@ -936,7 +1196,7 @@ append: list_add_tail(&desc->node, &chan->pending_list); chan->desc_pendingcount++; - if (chan->has_sg && + if (chan->has_sg && (chan->xdev->dmatype == XDMA_TYPE_VDMA) && unlikely(chan->desc_pendingcount > chan->num_frms)) { dev_dbg(chan->dev, "desc pendingcount is too high\n"); chan->desc_pendingcount = chan->num_frms; @@ -1064,6 +1324,109 @@ error: } /** + * xilinx_dma_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction + * @dchan: DMA channel + * @sgl: scatterlist to transfer to/from + * @sg_len: number of entries in @scatterlist + * @direction: DMA direction + * @flags: transfer ack flags + * @context: APP words of the descriptor + * + * Return: Async transaction descriptor on success and NULL on failure + */ +static struct dma_async_tx_descriptor *xilinx_dma_prep_slave_sg( + struct dma_chan *dchan, struct scatterlist *sgl, unsigned int sg_len, + enum dma_transfer_direction direction, unsigned long flags, + void *context) +{ + struct xilinx_dma_chan *chan = to_xilinx_chan(dchan); + struct xilinx_dma_tx_descriptor *desc; + struct xilinx_axidma_tx_segment *segment = NULL, *prev = NULL; + u32 *app_w = (u32 *)context; + struct scatterlist *sg; + size_t copy; + size_t sg_used; + unsigned int i; + + if (!is_slave_direction(direction)) + return NULL; + + /* Allocate a transaction descriptor. */ + desc = xilinx_dma_alloc_tx_descriptor(chan); + if (!desc) + return NULL; + + dma_async_tx_descriptor_init(&desc->async_tx, &chan->common); + desc->async_tx.tx_submit = xilinx_dma_tx_submit; + + /* Build transactions using information in the scatter gather list */ + for_each_sg(sgl, sg, sg_len, i) { + sg_used = 0; + + /* Loop until the entire scatterlist entry is used */ + while (sg_used < sg_dma_len(sg)) { + struct xilinx_axidma_desc_hw *hw; + + /* Get a free segment */ + segment = xilinx_axidma_alloc_tx_segment(chan); + if (!segment) + goto error; + + /* + * Calculate the maximum number of bytes to transfer, + * making sure it is less than the hw limit + */ + copy = min_t(size_t, sg_dma_len(sg) - sg_used, + XILINX_DMA_MAX_TRANS_LEN); + hw = &segment->hw; + + /* Fill in the descriptor */ + hw->buf_addr = sg_dma_address(sg) + sg_used; + + hw->control = copy; + + if (chan->direction == DMA_MEM_TO_DEV) { + if (app_w) + memcpy(hw->app, app_w, sizeof(u32) * + XILINX_DMA_NUM_APP_WORDS); + } + + if (prev) + prev->hw.next_desc = segment->phys; + + prev = segment; + sg_used += copy; + + /* + * Insert the segment into the descriptor segments + * list. + */ + list_add_tail(&segment->node, &desc->segments); + } + } + + segment = list_first_entry(&desc->segments, + struct xilinx_axidma_tx_segment, node); + desc->async_tx.phys = segment->phys; + prev->hw.next_desc = segment->phys; + + /* For the last DMA_MEM_TO_DEV transfer, set EOP */ + if (chan->direction == DMA_MEM_TO_DEV) { + segment->hw.control |= XILINX_DMA_BD_SOP; + segment = list_last_entry(&desc->segments, + struct xilinx_axidma_tx_segment, + node); + segment->hw.control |= XILINX_DMA_BD_EOP; + } + + return &desc->async_tx; + +error: + xilinx_dma_free_tx_descriptor(chan, desc); + return NULL; +} + +/** * xilinx_dma_terminate_all - Halt the channel and free descriptors * @chan: Driver specific DMA Channel pointer */ @@ -1225,22 +1588,26 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev, chan->id = 0; chan->ctrl_offset = XILINX_DMA_MM2S_CTRL_OFFSET; - chan->desc_offset = XILINX_VDMA_MM2S_DESC_OFFSET; + if (xdev->dmatype == XDMA_TYPE_VDMA) { + chan->desc_offset = XILINX_VDMA_MM2S_DESC_OFFSET; - if (xdev->flush_on_fsync == XILINX_DMA_FLUSH_BOTH || - xdev->flush_on_fsync == XILINX_DMA_FLUSH_MM2S) - chan->flush_on_fsync = true; + if (xdev->flush_on_fsync == XILINX_DMA_FLUSH_BOTH || + xdev->flush_on_fsync == XILINX_DMA_FLUSH_MM2S) + chan->flush_on_fsync = true; + } } else if (of_device_is_compatible(node, "xlnx,axi-dma-s2mm-channel")) { chan->direction = DMA_DEV_TO_MEM; chan->id = 1; chan->ctrl_offset = XILINX_DMA_S2MM_CTRL_OFFSET; - chan->desc_offset = XILINX_VDMA_S2MM_DESC_OFFSET; + if (xdev->dmatype == XDMA_TYPE_VDMA) { + chan->desc_offset = XILINX_VDMA_S2MM_DESC_OFFSET; - if (xdev->flush_on_fsync == XILINX_DMA_FLUSH_BOTH || - xdev->flush_on_fsync == XILINX_DMA_FLUSH_S2MM) - chan->flush_on_fsync = true; + if (xdev->flush_on_fsync == XILINX_DMA_FLUSH_BOTH || + xdev->flush_on_fsync == XILINX_DMA_FLUSH_S2MM) + chan->flush_on_fsync = true; + } } else { dev_err(xdev->dev, "Invalid channel compatible node\n"); return -EINVAL; @@ -1255,6 +1622,11 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev, return err; } + if (xdev->dmatype == XDMA_TYPE_AXIDMA) + chan->start_transfer = xilinx_dma_start_transfer; + else + chan->start_transfer = xilinx_vdma_start_transfer; + /* Initialize the tasklet */ tasklet_init(&chan->tasklet, xilinx_dma_do_tasklet, (unsigned long)chan); @@ -1297,6 +1669,15 @@ static struct dma_chan *of_dma_xilinx_xlate(struct of_phandle_args *dma_spec, return dma_get_slave_channel(&xdev->chan[chan_id]->common); } +static const struct of_device_id xilinx_dma_of_ids[] = { + { .compatible = "xlnx,axi-dma-1.00.a", + .data = (void *)XDMA_TYPE_AXIDMA }, + { .compatible = "xlnx,axi-vdma-1.00.a", + .data = (void *)XDMA_TYPE_VDMA }, + {} +}; +MODULE_DEVICE_TABLE(of, xilinx_dma_of_ids); + /** * xilinx_dma_probe - Driver probe function * @pdev: Pointer to the platform_device structure @@ -1318,6 +1699,7 @@ static int xilinx_dma_probe(struct platform_device *pdev) return -ENOMEM; xdev->dev = &pdev->dev; + xdev->dmatype = (enum xdma_ip_type)of_device_get_match_data(&pdev->dev); /* Request and map I/O memory */ io = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -1328,16 +1710,21 @@ static int xilinx_dma_probe(struct platform_device *pdev) /* Retrieve the DMA engine properties from the device tree */ xdev->has_sg = of_property_read_bool(node, "xlnx,include-sg"); - err = of_property_read_u32(node, "xlnx,num-fstores", &num_frames); - if (err < 0) { - dev_err(xdev->dev, "missing xlnx,num-fstores property\n"); - return err; - } + if (xdev->dmatype == XDMA_TYPE_VDMA) { + err = of_property_read_u32(node, "xlnx,num-fstores", + &num_frames); + if (err < 0) { + dev_err(xdev->dev, + "missing xlnx,num-fstores property\n"); + return err; + } - err = of_property_read_u32(node, "xlnx,flush-fsync", - &xdev->flush_on_fsync); - if (err < 0) - dev_warn(xdev->dev, "missing xlnx,flush-fsync property\n"); + err = of_property_read_u32(node, "xlnx,flush-fsync", + &xdev->flush_on_fsync); + if (err < 0) + dev_warn(xdev->dev, + "missing xlnx,flush-fsync property\n"); + } err = of_property_read_u32(node, "xlnx,addrwidth", &addr_width); if (err < 0) @@ -1362,11 +1749,18 @@ static int xilinx_dma_probe(struct platform_device *pdev) xilinx_dma_alloc_chan_resources; xdev->common.device_free_chan_resources = xilinx_dma_free_chan_resources; - xdev->common.device_prep_interleaved_dma = - xilinx_vdma_dma_prep_interleaved; xdev->common.device_terminate_all = xilinx_dma_terminate_all; xdev->common.device_tx_status = xilinx_dma_tx_status; xdev->common.device_issue_pending = xilinx_dma_issue_pending; + if (xdev->dmatype == XDMA_TYPE_AXIDMA) { + xdev->common.device_prep_slave_sg = xilinx_dma_prep_slave_sg; + /* Residue calculation is supported by only AXI DMA */ + xdev->common.residue_granularity = + DMA_RESIDUE_GRANULARITY_SEGMENT; + } else { + xdev->common.device_prep_interleaved_dma = + xilinx_vdma_dma_prep_interleaved; + } platform_set_drvdata(pdev, xdev); @@ -1377,9 +1771,11 @@ static int xilinx_dma_probe(struct platform_device *pdev) goto error; } - for (i = 0; i < XILINX_DMA_MAX_CHANS_PER_DEVICE; i++) - if (xdev->chan[i]) - xdev->chan[i]->num_frms = num_frames; + if (xdev->dmatype == XDMA_TYPE_VDMA) { + for (i = 0; i < XILINX_DMA_MAX_CHANS_PER_DEVICE; i++) + if (xdev->chan[i]) + xdev->chan[i]->num_frms = num_frames; + } /* Register the DMA engine with the core */ dma_async_device_register(&xdev->common); @@ -1426,12 +1822,6 @@ static int xilinx_dma_remove(struct platform_device *pdev) return 0; } -static const struct of_device_id xilinx_dma_of_ids[] = { - { .compatible = "xlnx,axi-vdma-1.00.a",}, - {} -}; -MODULE_DEVICE_TABLE(of, xilinx_dma_of_ids); - static struct platform_driver xilinx_vdma_driver = { .driver = { .name = "xilinx-vdma", diff --git a/include/linux/dma/xilinx_dma.h b/include/linux/dma/xilinx_dma.h index 34b98f2..e25872b 100644 --- a/include/linux/dma/xilinx_dma.h +++ b/include/linux/dma/xilinx_dma.h @@ -41,6 +41,18 @@ struct xilinx_vdma_config { int ext_fsync; }; +/** + * enum xdma_ip_type: DMA IP type. + * + * XDMA_TYPE_DMA: Axi dma ip. + * XDMA_TYPE_VDMA: Axi vdma ip. + * + */ +enum xdma_ip_type { + XDMA_TYPE_AXIDMA = 0, + XDMA_TYPE_VDMA, +}; + int xilinx_vdma_channel_set_config(struct dma_chan *dchan, struct xilinx_vdma_config *cfg); -- 2.1.2