Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753569AbcC1Eyx (ORCPT ); Mon, 28 Mar 2016 00:54:53 -0400 Received: from mail-pa0-f66.google.com ([209.85.220.66]:34759 "EHLO mail-pa0-f66.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751512AbcC1Eyp (ORCPT ); Mon, 28 Mar 2016 00:54:45 -0400 Date: Mon, 28 Mar 2016 13:54:15 +0900 From: Daeseok Youn To: lidza.louina@gmail.com Cc: markh@compro.net, gregkh@linuxfoundation.org, driverdev-devel@linuxdriverproject.org, devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org, kernel-janitors@vger.kernel.org, wharms@bfs.de Subject: [PATCH V2] staging: dgnc: replace dgnc_offset_table with bit shift. Message-ID: <20160328045415.GA586@SEL-JYOUN-D1> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.21 (2010-09-15) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3516 Lines: 130 the dgnc_offset_table has a same value with (1 << port). So I tried to replace dgnc_offset_table array with 1 << port. And also there are redundant assignments(tmp and current_port) inside while loop for checking uart port, and remove them. Signed-off-by: Daeseok Youn --- V2: clean up useless variables and increasing port value is just for traversing all port with uart_poll. So It need to replace 'continue' with 'break' in switch statement and last of this function, move onto next port. drivers/staging/dgnc/dgnc_neo.c | 44 +++++++++++------------------------------ 1 file changed, 12 insertions(+), 32 deletions(-) diff --git a/drivers/staging/dgnc/dgnc_neo.c b/drivers/staging/dgnc/dgnc_neo.c index d732e6e..6b57c44 100644 --- a/drivers/staging/dgnc/dgnc_neo.c +++ b/drivers/staging/dgnc/dgnc_neo.c @@ -77,9 +77,6 @@ struct board_ops dgnc_neo_ops = { .send_immediate_char = neo_send_immediate_char }; -static uint dgnc_offset_table[8] = { 0x01, 0x02, 0x04, 0x08, - 0x10, 0x20, 0x40, 0x80 }; - /* * This function allows calls to ensure that all outstanding * PCI writes have been completed, by doing a PCI read against @@ -923,9 +920,7 @@ static irqreturn_t neo_intr(int irq, void *voidbrd) struct dgnc_board *brd = voidbrd; struct channel_t *ch; int port = 0; - int type = 0; - int current_port; - u32 tmp; + int type; u32 uart_poll; unsigned long flags; unsigned long flags2; @@ -960,29 +955,12 @@ static irqreturn_t neo_intr(int irq, void *voidbrd) /* At this point, we have at least SOMETHING to service, dig further... */ - current_port = 0; - /* Loop on each port */ while ((uart_poll & 0xff) != 0) { - tmp = uart_poll; - - /* Check current port to see if it has interrupt pending */ - if ((tmp & dgnc_offset_table[current_port]) != 0) { - port = current_port; - type = tmp >> (8 + (port * 3)); - type &= 0x7; - } else { - current_port++; - continue; - } - - /* Remove this port + type from uart_poll */ - uart_poll &= ~(dgnc_offset_table[port]); + type = uart_poll >> (8 + (port * 3)); + type &= 0x7; - if (!type) { - /* If no type, just ignore it, and move onto next port */ - continue; - } + uart_poll &= ~(0x01 << port); /* Switch on type of interrupt we have */ switch (type) { @@ -994,7 +972,7 @@ static irqreturn_t neo_intr(int irq, void *voidbrd) /* Verify the port is in range. */ if (port >= brd->nasync) - continue; + break; ch = brd->channels[port]; neo_copy_data_from_uart_to_queue(ch); @@ -1004,14 +982,14 @@ static irqreturn_t neo_intr(int irq, void *voidbrd) dgnc_check_queue_flow_control(ch); spin_unlock_irqrestore(&ch->ch_lock, flags2); - continue; + break; case UART_17158_RX_LINE_STATUS: /* * RXRDY and RX LINE Status (logic OR of LSR[4:1]) */ neo_parse_lsr(brd, port); - continue; + break; case UART_17158_TXRDY: /* @@ -1027,14 +1005,14 @@ static irqreturn_t neo_intr(int irq, void *voidbrd) * it should be, I was getting things like RXDY too. Weird. */ neo_parse_isr(brd, port); - continue; + break; case UART_17158_MSR: /* * MSR or flow control was seen. */ neo_parse_isr(brd, port); - continue; + break; default: /* @@ -1043,8 +1021,10 @@ static irqreturn_t neo_intr(int irq, void *voidbrd) * these once and awhile. * Its harmless, just ignore it and move on. */ - continue; + break; } + + port++; } /* -- 1.9.1