Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755835AbcC2B7q (ORCPT ); Mon, 28 Mar 2016 21:59:46 -0400 Received: from mail.kmu-office.ch ([178.209.48.109]:59912 "EHLO mail.kmu-office.ch" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755756AbcC2B7m (ORCPT ); Mon, 28 Mar 2016 21:59:42 -0400 From: Stefan Agner To: dri-devel@lists.freedesktop.org, shawnguo@kernel.org, stefan@agner.ch Cc: kernel@pengutronix.de, airlied@linux.ie, daniel.vetter@ffwll.ch, jianwei.wang.chn@gmail.com, alison.wang@freescale.com, meng.yi@nxp.com, alexander.stein@systec-electronic.com, mturquette@baylibre.com, sboyd@codeaurora.org, mark.rutland@arm.com, robh+dt@kernel.org, pawel.moll@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 7/8] ARM: dts: vf610: add display nodes Date: Mon, 28 Mar 2016 19:00:01 -0700 Message-Id: <1459216802-32094-8-git-send-email-stefan@agner.ch> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1459216802-32094-1-git-send-email-stefan@agner.ch> References: <1459216802-32094-1-git-send-email-stefan@agner.ch> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1255 Lines: 47 Add the dcu and tcon nodes to enable the Display Controller Unit and Timing Controller in Vybrid's SoC level device-tree file. Signed-off-by: Stefan Agner --- arch/arm/boot/dts/vfxxx.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index a9ceb5b..78e24c6 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -234,6 +234,14 @@ <20000000>; }; + tcon0: timing-controller@4003d000 { + compatible = "fsl,vf610-tcon"; + reg = <0x4003d000 0x1000>; + clocks = <&clks VF610_CLK_TCON0>; + clock-names = "ipg"; + status = "disabled"; + }; + wdoga5: wdog@4003e000 { compatible = "fsl,vf610-wdt", "fsl,imx21-wdt"; reg = <0x4003e000 0x1000>; @@ -339,6 +347,17 @@ status = "disabled"; }; + dcu0: dcu@40058000 { + compatible = "fsl,vf610-dcu"; + reg = <0x40058000 0x1200>; + interrupts = <30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_DCU0>, + <&clks VF610_CLK_DCU0_DIV>; + clock-names = "dcu", "pix"; + fsl,tcon = <&tcon0>; + status = "disabled"; + }; + i2c0: i2c@40066000 { #address-cells = <1>; #size-cells = <0>; -- 2.7.4