Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756662AbcC2JaK (ORCPT ); Tue, 29 Mar 2016 05:30:10 -0400 Received: from mirror2.csie.ntu.edu.tw ([140.112.30.76]:48470 "EHLO wens.csie.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756576AbcC2J2y (ORCPT ); Tue, 29 Mar 2016 05:28:54 -0400 From: Chen-Yu Tsai To: Lee Jones , Liam Girdwood , Mark Brown , Maxime Ripard Cc: Chen-Yu Tsai , linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@googlegroups.com Subject: [PATCH resend v2 0/9] mfd: axp20x: Add support for AXP809 PMIC Date: Tue, 29 Mar 2016 17:22:23 +0800 Message-Id: <1459243352-23344-1-git-send-email-wens@csie.org> X-Mailer: git-send-email 2.7.0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2620 Lines: 68 Hi everyone, This is a resend of v2 of the AXP809 PMIC support series. This adds support for X-Powers' AXP809 PMIC. This is the primary PMIC accompanying Allwinner's A80 SoC. For now, only the power button (PEK) and regulators are supported. These are supported using existing axp20x drivers. Driver patches are based on v4.6-rc1, while DT patches are based on Maxime's sunxi/dt-for-4.7 branch. Some regulator patches were merged into v4.6-rc1. Those have been dropped from this series. Other than that there are no changes. Patch 1 adds a MAINTAINERS entry for the X-Powers AXP PMICs. I list myself as the maintainer. Patch 2 adds AXP809 to the axp20x bindings. Patch 3 adds AXP809 support to the axp20x mfd driver. Patch 4 adds AXP809 support to the axp20x regulator driver. This patch depends on patch 3. Patch 5 adds a dtsi file for AXP809. Patch 6 enables AXP809 support on the A80 Optimus board. Patch 7 enables AXP809 support on the Cubieboard 4. Patch 8 disables the dummy regulators from sunxi-common-regulators.dtsi on the A80 Optimus board. These aren't used in the board DTS anymore. Patch 9 disables the dummy regulators from sunxi-common-regulators.dtsi, on the Cubieboard4. These aren't used in the board DTS anymore. Regards ChenYu Chen-Yu Tsai (9): MAINTAINERS: Add entry for X-Powers AXP family PMIC drivers mfd: axp20x: Add bindings for AXP809 PMIC mfd: axp20x: Add support for AXP809 PMIC regulator: axp20x: support AXP809 variant ARM: dts: sunxi: Add dtsi file for AXP809 PMIC ARM: dts: sun9i: a80-optimus: Add AXP809 PMIC device node and regulators ARM: dts: sun9i: cubieboard4: Add AXP809 PMIC device node and regulators ARM: dts: sun9i: a80-optimus: Disable dummy regulators vcc3v0, vcc3v3, vcc5v0 ARM: dts: sun9i: cubieboard4: Disable dummy regulators vcc3v0, vcc3v3, vcc5v0 Documentation/devicetree/bindings/mfd/axp20x.txt | 31 ++++- MAINTAINERS | 6 + .../dts/{sun9i-a80-cubieboard4.dts => axp809.dtsi} | 98 ++------------ arch/arm/boot/dts/sun9i-a80-cubieboard4.dts | 143 ++++++++++++++++++++- arch/arm/boot/dts/sun9i-a80-optimus.dts | 143 ++++++++++++++++++++- drivers/mfd/axp20x-rsb.c | 1 + drivers/mfd/axp20x.c | 79 ++++++++++++ drivers/regulator/axp20x-regulator.c | 119 ++++++++++++----- include/linux/mfd/axp20x.h | 59 +++++++++ 9 files changed, 554 insertions(+), 125 deletions(-) copy arch/arm/boot/dts/{sun9i-a80-cubieboard4.dts => axp809.dtsi} (52%) -- 2.7.0