Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755144AbcC3QQD (ORCPT ); Wed, 30 Mar 2016 12:16:03 -0400 Received: from down.free-electrons.com ([37.187.137.238]:35068 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1755082AbcC3QP7 (ORCPT ); Wed, 30 Mar 2016 12:15:59 -0400 From: Boris Brezillon To: David Woodhouse , Brian Norris , linux-mtd@lists.infradead.org, Boris Brezillon , Richard Weinberger Cc: Daniel Mack , Haojian Zhuang , Robert Jarzmik , Kukjin Kim , Krzysztof Kozlowski , linux-samsung-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Ralf Baechle , linux-mips@linux-mips.org, Nicolas Ferre , Jean-Christophe Plagniol-Villard , Alexandre Belloni , Wenyou Yang , Josh Wu , Ezequiel Garcia , Maxime Ripard , Chen-Yu Tsai , linux-sunxi@googlegroups.com, Stefan Agner , Kyungmin Park , Greg Kroah-Hartman , devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org, punnaiah choudary kalluri , Priit Laes , Kamal Dasu , bcm-kernel-feedback-list@broadcom.com, linux-api@vger.kernel.org, Harvey Hunt , Archit Taneja , Han Xu , Huang Shijie Subject: [PATCH v5 28/50] mtd: nand: diskonchip: switch to mtd_ooblayout_ops Date: Wed, 30 Mar 2016 18:14:43 +0200 Message-Id: <1459354505-32551-29-git-send-email-boris.brezillon@free-electrons.com> X-Mailer: git-send-email 2.5.0 In-Reply-To: <1459354505-32551-1-git-send-email-boris.brezillon@free-electrons.com> References: <1459354505-32551-1-git-send-email-boris.brezillon@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3169 Lines: 95 Implementing the mtd_ooblayout_ops interface is the new way of exposing ECC/OOB layout to MTD users. Signed-off-by: Boris Brezillon --- drivers/mtd/nand/diskonchip.c | 60 ++++++++++++++++++++++++++++++++----------- 1 file changed, 45 insertions(+), 15 deletions(-) diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index 547c100..a023ab9 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c @@ -950,20 +950,50 @@ static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat, //u_char mydatabuf[528]; -/* The strange out-of-order .oobfree list below is a (possibly unneeded) - * attempt to retain compatibility. It used to read: - * .oobfree = { {8, 8} } - * Since that leaves two bytes unusable, it was changed. But the following - * scheme might affect existing jffs2 installs by moving the cleanmarker: - * .oobfree = { {6, 10} } - * jffs2 seems to handle the above gracefully, but the current scheme seems - * safer. The only problem with it is that any code that parses oobfree must - * be able to handle out-of-order segments. - */ -static struct nand_ecclayout doc200x_oobinfo = { - .eccbytes = 6, - .eccpos = {0, 1, 2, 3, 4, 5}, - .oobfree = {{8, 8}, {6, 2}} +static int doc200x_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section) + return -ERANGE; + + oobregion->offset = 0; + oobregion->length = 6; + + return 0; +} + +static int doc200x_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section > 1) + return -ERANGE; + + /* + * The strange out-of-order free bytes definition is a (possibly + * unneeded) attempt to retain compatibility. It used to read: + * .oobfree = { {8, 8} } + * Since that leaves two bytes unusable, it was changed. But the + * following scheme might affect existing jffs2 installs by moving the + * cleanmarker: + * .oobfree = { {6, 10} } + * jffs2 seems to handle the above gracefully, but the current scheme + * seems safer. The only problem with it is that any code retrieving + * free bytes position must be able to handle out-of-order segments. + */ + if (!section) { + oobregion->offset = 8; + oobregion->length = 8; + } else { + oobregion->offset = 6; + oobregion->length = 2; + } + + return 0; +} + +static const struct mtd_ooblayout_ops doc200x_ooblayout_ops = { + .ecc = doc200x_ooblayout_ecc, + .free = doc200x_ooblayout_free, }; /* Find the (I)NFTL Media Header, and optionally also the mirror media header. @@ -1537,6 +1567,7 @@ static int __init doc_probe(unsigned long physadr) nand->bbt_md = nand->bbt_td + 1; mtd->owner = THIS_MODULE; + mtd_set_ooblayout(mtd, &doc200x_ooblayout_ops); nand_set_controller_data(nand, doc); nand->select_chip = doc200x_select_chip; @@ -1548,7 +1579,6 @@ static int __init doc_probe(unsigned long physadr) nand->ecc.calculate = doc200x_calculate_ecc; nand->ecc.correct = doc200x_correct_data; - nand->ecc.layout = &doc200x_oobinfo; nand->ecc.mode = NAND_ECC_HW_SYNDROME; nand->ecc.size = 512; nand->ecc.bytes = 6; -- 2.5.0