Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755149AbcC3US4 (ORCPT ); Wed, 30 Mar 2016 16:18:56 -0400 Received: from down.free-electrons.com ([37.187.137.238]:44873 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S932083AbcC3UEq (ORCPT ); Wed, 30 Mar 2016 16:04:46 -0400 From: Boris Brezillon To: Thierry Reding , linux-pwm@vger.kernel.org Cc: Mike Turquette , Stephen Boyd , linux-clk@vger.kernel.org, Mark Brown , Liam Girdwood , Kamil Debski , lm-sensors@lm-sensors.org, Jean Delvare , Guenter Roeck , Dmitry Torokhov , linux-input@vger.kernel.org, Bryan Wu , Richard Purdie , Jacek Anaszewski , linux-leds@vger.kernel.org, Maxime Ripard , Chen-Yu Tsai , linux-sunxi@googlegroups.com, Joachim Eastwood , Thomas Petazzoni , Heiko Stuebner , linux-rockchip@lists.infradead.org, Jingoo Han , Lee Jones , linux-fbdev@vger.kernel.org, Jean-Christophe Plagniol-Villard , Tomi Valkeinen , Robert Jarzmik , Alexandre Belloni , Kukjin Kim , Krzysztof Kozlowski , linux-samsung-soc@vger.kernel.org, intel-gfx@lists.freedesktop.org, Daniel Vetter , Jani Nikula , Jonathan Corbet , linux-doc@vger.kernel.org, David Airlie , Daniel Vetter , dri-devel@lists.freedesktop.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Hartley Sweeten , Ryan Mallon , Alexander Shiyan , Milo Kim , Boris Brezillon Subject: [PATCH v5 09/46] misc: max77693-haptic: use pwm_get_args() where appropriate Date: Wed, 30 Mar 2016 22:03:32 +0200 Message-Id: <1459368249-13241-10-git-send-email-boris.brezillon@free-electrons.com> X-Mailer: git-send-email 2.5.0 In-Reply-To: <1459368249-13241-1-git-send-email-boris.brezillon@free-electrons.com> References: <1459368249-13241-1-git-send-email-boris.brezillon@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2230 Lines: 56 The PWM framework has clarified the concept of reference PWM config (the platform dependent config retrieved from the DT or the PWM lookup table) and real PWM state. Use pwm_get_args() when the PWM user wants to retrieve this reference config and not the current state. This is part of the rework allowing the PWM framework to support hardware readout and expose real PWM state even when the PWM has just been requested (before the user calls pwm_config/enable/disable()). Signed-off-by: Boris Brezillon --- drivers/input/misc/max77693-haptic.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/input/misc/max77693-haptic.c b/drivers/input/misc/max77693-haptic.c index 6d96bff..cf6aac0 100644 --- a/drivers/input/misc/max77693-haptic.c +++ b/drivers/input/misc/max77693-haptic.c @@ -70,10 +70,13 @@ struct max77693_haptic { static int max77693_haptic_set_duty_cycle(struct max77693_haptic *haptic) { - int delta = (haptic->pwm_dev->period + haptic->pwm_duty) / 2; + struct pwm_args pargs = { }; + int delta; int error; - error = pwm_config(haptic->pwm_dev, delta, haptic->pwm_dev->period); + pwm_get_args(haptic->pwm_dev, &pargs); + delta = (pargs.period + haptic->pwm_duty) / 2; + error = pwm_config(haptic->pwm_dev, delta, pargs.period); if (error) { dev_err(haptic->dev, "failed to configure pwm: %d\n", error); return error; @@ -234,6 +237,7 @@ static int max77693_haptic_play_effect(struct input_dev *dev, void *data, struct ff_effect *effect) { struct max77693_haptic *haptic = input_get_drvdata(dev); + struct pwm_args pargs = { }; u64 period_mag_multi; haptic->magnitude = effect->u.rumble.strong_magnitude; @@ -245,7 +249,8 @@ static int max77693_haptic_play_effect(struct input_dev *dev, void *data, * The formula to convert magnitude to pwm_duty as follows: * - pwm_duty = (magnitude * pwm_period) / MAX_MAGNITUDE(0xFFFF) */ - period_mag_multi = (u64)haptic->pwm_dev->period * haptic->magnitude; + pwm_get_args(haptic->pwm_dev, &pargs); + period_mag_multi = (u64)pargs.period * haptic->magnitude; haptic->pwm_duty = (unsigned int)(period_mag_multi >> MAX_MAGNITUDE_SHIFT); -- 2.5.0