Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756773AbcCaMes (ORCPT ); Thu, 31 Mar 2016 08:34:48 -0400 Received: from mail.karo-electronics.de ([81.173.242.67]:52239 "EHLO mail.karo-electronics.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756326AbcCaMeq (ORCPT ); Thu, 31 Mar 2016 08:34:46 -0400 From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= To: Dan Williams , Ian Campbell , Kumar Gala , Mark Rutland , Pawel Moll , Rob Herring , Russell King , Sascha Hauer , Shawn Guo , Vinod Koul , devicetree@vger.kernel.org, dmaengine@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= Subject: [PATCHv3 4/5] ARM: dts: imx6: add support for more Ka-Ro electronics modules Date: Thu, 31 Mar 2016 14:33:44 +0200 Message-Id: <1459427625-15568-5-git-send-email-LW@KARO-electronics.de> X-Mailer: git-send-email 2.1.4 In-Reply-To: <1459427625-15568-1-git-send-email-LW@KARO-electronics.de> References: <1459427625-15568-1-git-send-email-LW@KARO-electronics.de> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 29411 Lines: 1086 Add support for the following i.MX6 based modules from Ka-Ro electronics GmbH: TX6S-8034: Processor Freescale i.MX 6 Solo, 800MHz RAM 256MiB DDR3 SDRAM ROM 128MiB NAND Flash Power supply Single 3.1V to 5.5V Size 31mm SO-DIMM Temp. Range industrial grade (-40°C/-25°C to 105°C Tj) TX6S-8035: Processor Freescale i.MX 6 Solo, 800MHz RAM 512MiB DDR3 SDRAM ROM 4GiB eMMC Power supply Single 3.1V to 5.5V Size 31mm SO-DIMM Temp. Range industrial grade (-40°C/-25°C to 105°C Tj) TX6U-8033: Processor Freescale i.MX 6 Dual Lite, 800MHz RAM 1GiB DDR3 SDRAM ROM 4GiB eMMC Power supply Single 3.1V to 5.5V Size 31mm SO-DIMM Temp. Range industrial grade (-40°C/-25°C to 105°C Tj) TX6Q-1036: Processor Freescale i.MX 6Quad, 1GHz RAM 1GB DDR3 SDRAM 64-bit ROM 8GiB eMMC Power supply Single 3.1V to 5.5V Size 31mm SO-DIMM Temp. Range Extended Consumer Grade (-20°C to 105°C Tj) Signed-off-by: Lothar Waßmann --- arch/arm/boot/dts/Makefile | 4 + arch/arm/boot/dts/imx6dl-tx6s-8034.dts | 237 ++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx6dl-tx6s-8035.dts | 253 +++++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx6dl-tx6u-8033.dts | 248 ++++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx6q-tx6q-1036.dts | 252 ++++++++++++++++++++++++++++++++ 5 files changed, 994 insertions(+) create mode 100644 arch/arm/boot/dts/imx6dl-tx6s-8034.dts create mode 100644 arch/arm/boot/dts/imx6dl-tx6s-8035.dts create mode 100644 arch/arm/boot/dts/imx6dl-tx6u-8033.dts create mode 100644 arch/arm/boot/dts/imx6q-tx6q-1036.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 1993333..c9550c7 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -322,7 +322,10 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-sabrelite.dtb \ imx6dl-sabresd.dtb \ imx6dl-tx6dl-comtft.dtb \ + imx6dl-tx6s-8034.dtb \ + imx6dl-tx6s-8035.dtb \ imx6dl-tx6u-801x.dtb \ + imx6dl-tx6u-8033.dtb \ imx6dl-tx6u-811x.dtb \ imx6dl-udoo.dtb \ imx6dl-wandboard.dtb \ @@ -362,6 +365,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-tx6q-1010-comtft.dtb \ imx6q-tx6q-1020.dtb \ imx6q-tx6q-1020-comtft.dtb \ + imx6q-tx6q-1036.dtb \ imx6q-tx6q-1110.dtb \ imx6q-udoo.dtb \ imx6q-wandboard.dtb \ diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8034.dts b/arch/arm/boot/dts/imx6dl-tx6s-8034.dts new file mode 100644 index 0000000..ff8f7b1 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tx6s-8034.dts @@ -0,0 +1,237 @@ +/* + * Copyright 2015-2016 Lothar Waßmann + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-tx6.dtsi" + +/ { + model = "Ka-Ro electronics TX6S-8034 Module"; + compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; + + aliases { + display = &display; + ipu1 = &ipu1; + }; + + cpus { + /delete-node/ cpu@1; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd0_pwr>; + enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; + power-supply = <®_lcd1_pwr>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + display: display@di0 { + compatible = "fsl,imx-parallel-display"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0_2>; + interface-pix-fmt = "rgb24"; + status = "okay"; + + port { + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + display-timings { + native-mode = <&vga>; + + vga: VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hsync-len = <96>; + hfront-porch = <16>; + vback-porch = <31>; + vsync-len = <2>; + vfront-porch = <12>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETV570 { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <114>; + hsync-len = <30>; + hfront-porch = <16>; + vback-porch = <32>; + vsync-len = <3>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0350 { + clock-frequency = <6413760>; + hactive = <320>; + vactive = <240>; + hback-porch = <34>; + hsync-len = <34>; + hfront-porch = <20>; + vback-porch = <15>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0430 { + clock-frequency = <9009000>; + hactive = <480>; + vactive = <272>; + hback-porch = <2>; + hsync-len = <41>; + hfront-porch = <2>; + vback-porch = <2>; + vsync-len = <10>; + vfront-porch = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + ET0500 { + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0700 { /* same as ET0500 */ + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETQ570 { + clock-frequency = <6596040>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hsync-len = <30>; + hfront-porch = <30>; + vback-porch = <16>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&ds1339 { + status = "disabled"; +}; + +&pinctrl_usdhc1 { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x070b1 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x070b1 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x070b1 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x070b1 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x070b1 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x070b1 + MX6QDL_PAD_SD3_CMD__GPIO7_IO02 0x170b0 /* SD1 CD */ + >; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + +®_lcd0_pwr { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8035.dts b/arch/arm/boot/dts/imx6dl-tx6s-8035.dts new file mode 100644 index 0000000..f988950 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tx6s-8035.dts @@ -0,0 +1,253 @@ +/* + * Copyright 2015-2016 Lothar Waßmann + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-tx6.dtsi" + +/ { + model = "Ka-Ro electronics TX6S-8035 Module"; + compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; + + aliases { + display = &display; + ipu1 = &ipu1; + }; + + cpus { + /delete-node/ cpu@1; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd0_pwr>; + enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; + power-supply = <®_lcd1_pwr>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + display: display@di0 { + compatible = "fsl,imx-parallel-display"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0_2>; + interface-pix-fmt = "rgb24"; + status = "okay"; + + port { + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + display-timings { + native-mode = <&vga>; + + vga: VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hsync-len = <96>; + hfront-porch = <16>; + vback-porch = <31>; + vsync-len = <2>; + vfront-porch = <12>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETV570 { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <114>; + hsync-len = <30>; + hfront-porch = <16>; + vback-porch = <32>; + vsync-len = <3>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0350 { + clock-frequency = <6413760>; + hactive = <320>; + vactive = <240>; + hback-porch = <34>; + hsync-len = <34>; + hfront-porch = <20>; + vback-porch = <15>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0430 { + clock-frequency = <9009000>; + hactive = <480>; + vactive = <272>; + hback-porch = <2>; + hsync-len = <41>; + hfront-porch = <2>; + vback-porch = <2>; + vsync-len = <10>; + vfront-porch = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + ET0500 { + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0700 { /* same as ET0500 */ + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETQ570 { + clock-frequency = <6596040>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hsync-len = <30>; + hfront-porch = <30>; + vback-porch = <16>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&ds1339 { + status = "disabled"; +}; + +&gpmi { + status = "disabled"; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + +®_lcd0_pwr { + status = "disabled"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <4>; + non-removable; + no-1-8-v; + fsl,wp-controller; + status = "okay"; +}; + +&iomuxc { + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x070b1 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x070b1 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x070b1 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x070b1 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x070b1 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x070b1 + MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x0b0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-8033.dts b/arch/arm/boot/dts/imx6dl-tx6u-8033.dts new file mode 100644 index 0000000..4d3204a --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tx6u-8033.dts @@ -0,0 +1,248 @@ +/* + * Copyright 2014-2016 Lothar Waßmann + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-tx6.dtsi" + +/ { + model = "Ka-Ro electronics TX6U-8033 Module"; + compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; + + aliases { + display = &display; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd0_pwr>; + enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; + power-supply = <®_lcd1_pwr>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + display: display@di0 { + compatible = "fsl,imx-parallel-display"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0_2>; + interface-pix-fmt = "rgb24"; + status = "okay"; + + port { + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + display-timings { + native-mode = <&vga>; + + vga: VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hsync-len = <96>; + hfront-porch = <16>; + vback-porch = <31>; + vsync-len = <2>; + vfront-porch = <12>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETV570 { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <114>; + hsync-len = <30>; + hfront-porch = <16>; + vback-porch = <32>; + vsync-len = <3>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0350 { + clock-frequency = <6413760>; + hactive = <320>; + vactive = <240>; + hback-porch = <34>; + hsync-len = <34>; + hfront-porch = <20>; + vback-porch = <15>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0430 { + clock-frequency = <9009000>; + hactive = <480>; + vactive = <272>; + hback-porch = <2>; + hsync-len = <41>; + hfront-porch = <2>; + vback-porch = <2>; + vsync-len = <10>; + vfront-porch = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + ET0500 { + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0700 { /* same as ET0500 */ + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETQ570 { + clock-frequency = <6596040>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hsync-len = <30>; + hfront-porch = <30>; + vback-porch = <16>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&ds1339 { + status = "disabled"; +}; + +&gpmi { + status = "disabled"; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + +®_lcd0_pwr { + status = "disabled"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <4>; + non-removable; + no-1-8-v; + fsl,wp-controller; + status = "okay"; +}; + +&iomuxc { + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x070b1 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x070b1 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x070b1 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x070b1 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x070b1 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x070b1 + MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x0b0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1036.dts b/arch/arm/boot/dts/imx6q-tx6q-1036.dts new file mode 100644 index 0000000..7c152e3 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-tx6q-1036.dts @@ -0,0 +1,252 @@ +/* + * Copyright 2014-2016 Lothar Waßmann + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-tx6.dtsi" + +/ { + model = "Ka-Ro electronics TX6Q-1036 Module"; + compatible = "karo,imx6q-tx6q", "fsl,imx6q"; + + aliases { + display = &display; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd0_pwr>; + enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; + power-supply = <®_lcd1_pwr>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + display: display@di0 { + compatible = "fsl,imx-parallel-display"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0_2>; + interface-pix-fmt = "rgb24"; + status = "okay"; + + port { + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + display-timings { + native-mode = <&vga>; + + vga: VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hsync-len = <96>; + hfront-porch = <16>; + vback-porch = <31>; + vsync-len = <2>; + vfront-porch = <12>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETV570 { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <114>; + hsync-len = <30>; + hfront-porch = <16>; + vback-porch = <32>; + vsync-len = <3>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0350 { + clock-frequency = <6413760>; + hactive = <320>; + vactive = <240>; + hback-porch = <34>; + hsync-len = <34>; + hfront-porch = <20>; + vback-porch = <15>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0430 { + clock-frequency = <9009000>; + hactive = <480>; + vactive = <272>; + hback-porch = <2>; + hsync-len = <41>; + hfront-porch = <2>; + vback-porch = <2>; + vsync-len = <10>; + vfront-porch = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + ET0500 { + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0700 { /* same as ET0500 */ + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETQ570 { + clock-frequency = <6596040>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hsync-len = <30>; + hfront-porch = <30>; + vback-porch = <16>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&ds1339 { + status = "disabled"; +}; + +&gpmi { + status = "disabled"; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + +&ipu2 { + status = "disabled"; +}; + +®_lcd0_pwr { + status = "disabled"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <4>; + non-removable; + no-1-8-v; + fsl,wp-controller; + status = "okay"; +}; + +&iomuxc { + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x070b1 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x070b1 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x070b1 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x070b1 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x070b1 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x070b1 + MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x0b0b1 + >; + }; +}; -- 2.1.4