Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756849AbcCaMfp (ORCPT ); Thu, 31 Mar 2016 08:35:45 -0400 Received: from mail.karo-electronics.de ([81.173.242.67]:52219 "EHLO mail.karo-electronics.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756410AbcCaMea (ORCPT ); Thu, 31 Mar 2016 08:34:30 -0400 From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= To: Dan Williams , Ian Campbell , Kumar Gala , Mark Rutland , Pawel Moll , Rob Herring , Russell King , Sascha Hauer , Shawn Guo , Vinod Koul , devicetree@vger.kernel.org, dmaengine@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= Subject: [PATCHv3 2/5] ARM: dts: imx6-tx6: remove LED pinctrl setting from hoggrp Date: Thu, 31 Mar 2016 14:33:42 +0200 Message-Id: <1459427625-15568-3-git-send-email-LW@KARO-electronics.de> X-Mailer: git-send-email 2.1.4 In-Reply-To: <1459427625-15568-1-git-send-email-LW@KARO-electronics.de> References: <1459427625-15568-1-git-send-email-LW@KARO-electronics.de> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1314 Lines: 45 Move the pinctrl setting for the board LED from the hoggrp node to a separate node referenced by the LED driver, so that the pin is free to be used for different purpose when the LED driver is disabled. Signed-off-by: Lothar Waßmann --- arch/arm/boot/dts/imx6qdl-tx6.dtsi | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index a3e37a7..d96dba2 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -88,6 +88,8 @@ user_led: user { label = "Heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_user_led>; gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; @@ -328,7 +330,6 @@ pinctrl_hog: hoggrp { fsl,pins = < - MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1 /* LED */ MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */ MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT */ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* PWR BTN */ @@ -634,6 +635,12 @@ MX6QDL_PAD_SD3_CLK__GPIO7_IO03 0x170b0 /* SD2 CD */ >; }; + + pinctrl_user_led: user-ledgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1 /* LED */ + >; + }; }; &kpp { -- 2.1.4