Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758263AbcCaS6M (ORCPT ); Thu, 31 Mar 2016 14:58:12 -0400 Received: from smtprelay.synopsys.com ([198.182.60.111]:55314 "EHLO smtprelay.synopsys.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758200AbcCaS6C (ORCPT ); Thu, 31 Mar 2016 14:58:02 -0400 From: Joao Pinto To: tomas.winkler@intel.com Cc: vinholikatti@gmail.com, julian.calaby@gmail.com, akinobu.mita@gmail.com, hch@infradead.org, gbroner@codeaurora.org, subhashj@codeaurora.org, CARLOS.PALMINHA@synopsys.com, ijc+devicetree@hellion.org.uk, linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org, devicetree@vger.kernel.org, arnd@arndb.de, mark.rutland@arm.com, Joao Pinto Subject: [PATCH v12 7/9] added support for Synopsys G210 Test Chip Date: Thu, 31 Mar 2016 19:57:20 +0100 Message-Id: X-Mailer: git-send-email 1.8.1.5 In-Reply-To: References: In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 12011 Lines: 388 This patch adds support for Synopsys G210 Test Chip. Signed-off-by: Joao Pinto --- Changes v10->v12: - Nothing changed (just to keep up with patch set version). Changes v0->v10: - This patch only appeared in v10 drivers/scsi/ufs/Kconfig | 4 + drivers/scsi/ufs/Makefile | 1 + drivers/scsi/ufs/tc-dwc-g210.c | 315 +++++++++++++++++++++++++++++++++++++++++ drivers/scsi/ufs/tc-dwc-g210.h | 19 +++ 4 files changed, 339 insertions(+) create mode 100644 drivers/scsi/ufs/tc-dwc-g210.c create mode 100644 drivers/scsi/ufs/tc-dwc-g210.h diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig index 647c324..9d218f9 100644 --- a/drivers/scsi/ufs/Kconfig +++ b/drivers/scsi/ufs/Kconfig @@ -86,3 +86,7 @@ config SCSI_UFS_QCOM config SCSI_UFS_DWC bool + +config SCSI_UFS_DWC_TC + bool + select SCSI_UFS_DWC diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile index ccbad53..9468d7b 100644 --- a/drivers/scsi/ufs/Makefile +++ b/drivers/scsi/ufs/Makefile @@ -1,5 +1,6 @@ # UFSHCD makefile obj-$(CONFIG_SCSI_UFS_DWC) += ufshcd-dwc.o +obj-$(CONFIG_SCSI_UFS_DWC_TC) += tc-dwc-g210.o obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o diff --git a/drivers/scsi/ufs/tc-dwc-g210.c b/drivers/scsi/ufs/tc-dwc-g210.c new file mode 100644 index 0000000..181f208 --- /dev/null +++ b/drivers/scsi/ufs/tc-dwc-g210.c @@ -0,0 +1,315 @@ +/* + * Synopsys G210 Test Chip driver + * + * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com) + * + * Authors: Joao Pinto + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "ufshcd.h" +#include "unipro.h" + +#include "ufshcd-dwc.h" +#include "ufshci-dwc.h" + +/** + * tc_dwc_g210_setup_40bit_rmmi() + * This function configures Synopsys TC specific atributes (40-bit RMMI) + * @hba: Pointer to drivers structure + * + * Returns 0 on success or non-zero value on failure + */ +static int tc_dwc_g210_setup_40bit_rmmi(struct ufs_hba *hba) +{ + const struct ufshcd_dme_attr_val setup_attrs[] = { + { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL }, + { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL }, + { UIC_ARG_MIB(CDIRECTCTRL6), 0x80, DME_LOCAL }, + { UIC_ARG_MIB(CBDIVFACTOR), 0x08, DME_LOCAL }, + { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL }, + { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL }, + { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL }, + { UIC_ARG_MIB_SEL(TX_REFCLKFREQ, SELIND_LN0_TX), 0x01, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL, SELIND_LN0_TX), 0x19, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(CFGEXTRATTR, SELIND_LN0_TX), 0x14, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(DITHERCTRL2, SELIND_LN0_TX), 0xd6, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(RX_REFCLKFREQ, SELIND_LN0_RX), 0x01, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(RX_CFGCLKFREQVAL, SELIND_LN0_RX), 0x19, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(CFGWIDEINLN, SELIND_LN0_RX), 4, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(CFGRXCDR8, SELIND_LN0_RX), 0x80, + DME_LOCAL }, + { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL }, + { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL }, + { UIC_ARG_MIB_SEL(CFGRXCDR8, SELIND_LN0_RX), 0x80, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(ENARXDIRECTCFG4, SELIND_LN0_RX), 0x03, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(CFGRXOVR8, SELIND_LN0_RX), 0x16, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(RXDIRECTCTRL2, SELIND_LN0_RX), 0x42, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(ENARXDIRECTCFG3, SELIND_LN0_RX), 0xa4, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(RXCALCTRL, SELIND_LN0_RX), 0x01, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(ENARXDIRECTCFG2, SELIND_LN0_RX), 0x01, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(CFGRXOVR4, SELIND_LN0_RX), 0x28, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(RXSQCTRL, SELIND_LN0_RX), 0x1E, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(CFGRXOVR6, SELIND_LN0_RX), 0x2f, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(CFGRXOVR6, SELIND_LN0_RX), 0x2f, + DME_LOCAL }, + { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL }, + }; + + return ufshcd_dwc_dme_set_attrs(hba, setup_attrs, + ARRAY_SIZE(setup_attrs)); +} + +/** + * tc_dwc_g210_setup_20bit_rmmi_lane0() + * This function configures Synopsys TC 20-bit RMMI Lane 0 + * @hba: Pointer to drivers structure + * + * Returns 0 on success or non-zero value on failure + */ +static int tc_dwc_g210_setup_20bit_rmmi_lane0(struct ufs_hba *hba) +{ + const struct ufshcd_dme_attr_val setup_attrs[] = { + { UIC_ARG_MIB_SEL(TX_REFCLKFREQ, SELIND_LN0_TX), 0x01, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL, SELIND_LN0_TX), 0x19, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(RX_CFGCLKFREQVAL, SELIND_LN0_RX), 0x19, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(CFGEXTRATTR, SELIND_LN0_TX), 0x12, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(DITHERCTRL2, SELIND_LN0_TX), 0xd6, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(RX_REFCLKFREQ, SELIND_LN0_RX), 0x01, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(CFGWIDEINLN, SELIND_LN0_RX), 2, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(CFGRXCDR8, SELIND_LN0_RX), 0x80, + DME_LOCAL }, + { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL }, + { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL }, + { UIC_ARG_MIB_SEL(ENARXDIRECTCFG4, SELIND_LN0_RX), 0x03, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(CFGRXOVR8, SELIND_LN0_RX), 0x16, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(RXDIRECTCTRL2, SELIND_LN0_RX), 0x42, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(ENARXDIRECTCFG3, SELIND_LN0_RX), 0xa4, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(RXCALCTRL, SELIND_LN0_RX), 0x01, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(ENARXDIRECTCFG2, SELIND_LN0_RX), 0x01, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(CFGRXOVR4, SELIND_LN0_RX), 0x28, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(RXSQCTRL, SELIND_LN0_RX), 0x1E, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(CFGRXOVR6, SELIND_LN0_RX), 0x2f, + DME_LOCAL }, + { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL }, + }; + + return ufshcd_dwc_dme_set_attrs(hba, setup_attrs, + ARRAY_SIZE(setup_attrs)); +} + +/** + * tc_dwc_g210_setup_20bit_rmmi_lane1() + * This function configures Synopsys TC 20-bit RMMI Lane 1 + * @hba: Pointer to drivers structure + * + * Returns 0 on success or non-zero value on failure + */ +static int tc_dwc_g210_setup_20bit_rmmi_lane1(struct ufs_hba *hba) +{ + int connected_rx_lanes = 0; + int connected_tx_lanes = 0; + int ret = 0; + + const struct ufshcd_dme_attr_val setup_tx_attrs[] = { + { UIC_ARG_MIB_SEL(TX_REFCLKFREQ, SELIND_LN1_TX), 0x0d, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL, SELIND_LN1_TX), 0x19, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(CFGEXTRATTR, SELIND_LN1_TX), 0x12, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(DITHERCTRL2, SELIND_LN0_TX), 0xd6, + DME_LOCAL }, + }; + + const struct ufshcd_dme_attr_val setup_rx_attrs[] = { + { UIC_ARG_MIB_SEL(RX_REFCLKFREQ, SELIND_LN1_RX), 0x01, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(RX_CFGCLKFREQVAL, SELIND_LN1_RX), 0x19, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(CFGWIDEINLN, SELIND_LN1_RX), 2, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(CFGRXCDR8, SELIND_LN1_RX), 0x80, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(ENARXDIRECTCFG4, SELIND_LN1_RX), 0x03, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(CFGRXOVR8, SELIND_LN1_RX), 0x16, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(RXDIRECTCTRL2, SELIND_LN1_RX), 0x42, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(ENARXDIRECTCFG3, SELIND_LN1_RX), 0xa4, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(RXCALCTRL, SELIND_LN1_RX), 0x01, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(ENARXDIRECTCFG2, SELIND_LN1_RX), 0x01, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(CFGRXOVR4, SELIND_LN1_RX), 0x28, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(RXSQCTRL, SELIND_LN1_RX), 0x1E, + DME_LOCAL }, + { UIC_ARG_MIB_SEL(CFGRXOVR6, SELIND_LN1_RX), 0x2f, + DME_LOCAL }, + }; + + /* Get the available lane count */ + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDRXDATALANES), + &connected_rx_lanes); + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), + &connected_tx_lanes); + + if (connected_tx_lanes == 2) { + + ret = ufshcd_dwc_dme_set_attrs(hba, setup_tx_attrs, + ARRAY_SIZE(setup_tx_attrs)); + + if (ret) + goto out; + } + + if (connected_rx_lanes == 2) { + ret = ufshcd_dwc_dme_set_attrs(hba, setup_rx_attrs, + ARRAY_SIZE(setup_rx_attrs)); + } + +out: + return ret; +} + +/** + * tc_dwc_g210_setup_20bit_rmmi() + * This function configures Synopsys TC specific atributes (20-bit RMMI) + * @hba: Pointer to drivers structure + * + * Returns 0 on success or non-zero value on failure + */ +static int tc_dwc_g210_setup_20bit_rmmi(struct ufs_hba *hba) +{ + int ret = 0; + + const struct ufshcd_dme_attr_val setup_attrs[] = { + { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL }, + { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL }, + { UIC_ARG_MIB(CDIRECTCTRL6), 0xc0, DME_LOCAL }, + { UIC_ARG_MIB(CBDIVFACTOR), 0x44, DME_LOCAL }, + { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL }, + { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL }, + { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL }, + }; + + ret = ufshcd_dwc_dme_set_attrs(hba, setup_attrs, + ARRAY_SIZE(setup_attrs)); + if (ret) + goto out; + + /* Lane 0 configuration*/ + ret = tc_dwc_g210_setup_20bit_rmmi_lane0(hba); + if (ret) + goto out; + + /* Lane 1 configuration*/ + ret = tc_dwc_g210_setup_20bit_rmmi_lane1(hba); + if (ret) + goto out; + +out: + return ret; +} + +/** + * tc_dwc_g210_config_40_bit() + * This function configures Local (host) Synopsys 40-bit TC specific attributes + * + * @hba: Pointer to drivers structure + * + * Returns 0 on success non-zero value on failure + */ +int tc_dwc_g210_config_40_bit(struct ufs_hba *hba) +{ + int ret = 0; + + dev_info(hba->dev, "Configuring Test Chip 40-bit RMMI\n"); + ret = tc_dwc_g210_setup_40bit_rmmi(hba); + if (ret) { + dev_err(hba->dev, "Configuration failed\n"); + goto out; + } + + /* To write Shadow register bank to effective configuration block */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(VS_MPHYCFGUPDT), 0x01); + if (ret) + goto out; + + /* To configure Debug OMC */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(VS_DEBUGOMC), 0x01); + +out: + return ret; +} +EXPORT_SYMBOL(tc_dwc_g210_config_40_bit); + +/** + * tc_dwc_g210_config_20_bit() + * This function configures Local (host) Synopsys 20-bit TC specific attributes + * + * @hba: Pointer to drivers structure + * + * Returns 0 on success non-zero value on failure + */ +int tc_dwc_g210_config_20_bit(struct ufs_hba *hba) +{ + int ret = 0; + + dev_info(hba->dev, "Configuring Test Chip 20-bit RMMI\n"); + ret = tc_dwc_g210_setup_20bit_rmmi(hba); + if (ret) { + dev_err(hba->dev, "Configuration failed\n"); + goto out; + } + + /* To write Shadow register bank to effective configuration block */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(VS_MPHYCFGUPDT), 0x01); + if (ret) + goto out; + + /* To configure Debug OMC */ + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(VS_DEBUGOMC), 0x01); + +out: + return ret; +} +EXPORT_SYMBOL(tc_dwc_g210_config_20_bit); diff --git a/drivers/scsi/ufs/tc-dwc-g210.h b/drivers/scsi/ufs/tc-dwc-g210.h new file mode 100644 index 0000000..fb177db --- /dev/null +++ b/drivers/scsi/ufs/tc-dwc-g210.h @@ -0,0 +1,19 @@ +/* + * Synopsys G210 Test Chip driver + * + * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com) + * + * Authors: Joao Pinto + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _TC_DWC_G210_H +#define _TC_DWC_G210_H + +int tc_dwc_g210_config_40_bit(struct ufs_hba *hba); +int tc_dwc_g210_config_20_bit(struct ufs_hba *hba); + +#endif /* End of Header */ -- 1.8.1.5