Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751895AbcDBGHc (ORCPT ); Sat, 2 Apr 2016 02:07:32 -0400 Received: from mail.kmu-office.ch ([178.209.48.109]:38031 "EHLO mail.kmu-office.ch" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751231AbcDBGHb (ORCPT ); Sat, 2 Apr 2016 02:07:31 -0400 From: Stefan Agner To: arnd@arndb.de Cc: mcoquelin.stm32@gmail.com, u.kleine-koenig@pengutronix.de, shawnguo@kernel.org, kernel@pengutronix.de, robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Stefan Agner Subject: [PATCH] ARM: dts: armv7-m: add address to unit name Date: Fri, 1 Apr 2016 23:08:19 -0700 Message-Id: <1459577299-2818-1-git-send-email-stefan@agner.ch> X-Mailer: git-send-email 2.7.4 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 838 Lines: 32 Add address to unit name to remove the following warning: Warning (unit_address_vs_reg): Node /nv-interrupt-controller has a reg or ranges property, but no unit name Signed-off-by: Stefan Agner --- Hi Arnd, Not sure through which tree this should go but an earlier patch seemd to be applied directly by you... -- Stefan arch/arm/boot/dts/armv7-m.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/armv7-m.dtsi b/arch/arm/boot/dts/armv7-m.dtsi index b1ad7cf..8126bec 100644 --- a/arch/arm/boot/dts/armv7-m.dtsi +++ b/arch/arm/boot/dts/armv7-m.dtsi @@ -1,7 +1,7 @@ #include "skeleton.dtsi" / { - nvic: nv-interrupt-controller { + nvic: nv-interrupt-controller@0xe000e100 { compatible = "arm,armv7m-nvic"; interrupt-controller; #interrupt-cells = <1>; -- 2.7.4