Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754589AbcDDFQo (ORCPT ); Mon, 4 Apr 2016 01:16:44 -0400 Received: from mail.kernel.org ([198.145.29.136]:50099 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754470AbcDDFQl (ORCPT ); Mon, 4 Apr 2016 01:16:41 -0400 Date: Mon, 4 Apr 2016 00:16:35 -0500 From: Rob Herring To: Linus Walleij Cc: Guodong Xu , Xu Wei , Mark Rutland , Grant Likely , Arnd Bergmann , "devicetree@vger.kernel.org" , "linux-kernel@vger.kernel.org" , "linux-arm-kernel@lists.infradead.org" , XinWei Kong , Leo Yan Subject: Re: [PATCH v2 02/16] arm64: dts: add sp804 timer node for Hi6220 Message-ID: <20160404051635.GQ17806@rob-hp-laptop> References: <1459589383-16914-1-git-send-email-guodong.xu@linaro.org> <1459589383-16914-3-git-send-email-guodong.xu@linaro.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.5.23 (2014-03-12) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2373 Lines: 60 On Sun, Apr 03, 2016 at 09:23:42PM +0200, Linus Walleij wrote: > On Sat, Apr 2, 2016 at 11:29 AM, Guodong Xu wrote: > > > From: Leo Yan > > > > Add sp804 timer for hi6220, so it can be used as broadcast timer. > > > > Signed-off-by: Leo Yan > > Signed-off-by: Wei Xu > > --- > > arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 9 +++++++++ > > 1 file changed, 9 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi > > index ad1f1eb..82c4756 100644 > > --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi > > +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi > > @@ -209,5 +209,14 @@ > > clock-names = "uartclk", "apb_pclk"; > > status = "disabled"; > > }; > > + > > + dual_timer0: dual_timer@f8008000 { timer@... > > + compatible = "arm,sp804", "arm,primecell"; > > + reg = <0x0 0xf8008000 0x0 0x1000>; > > + interrupts = , > > + ; > > + clocks = <&ao_ctrl 27>; > > + clock-names = "apb_pclk"; > > How can this work? You only give the apb_pclk for clocking the > bus to the timer. > > Most platforms using this driver has something like this: > > timer01: timer@10104000 { > compatible = "arm,sp804", "arm,primecell"; > reg = <0x10104000 0x1000>; > interrupt-parent = <&intc_dc1176>; > interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>, <0 9 > IRQ_TYPE_LEVEL_HIGH>; > clocks = <&timclk>, <&timclk>, <&pclk>; > clock-names = "timer1", "timer2", "apb_pclk"; > }; > > It then reads the two clocks in the beginning of clocks() to > determine the frequency of each timer. > > By chance the code in the driver will allow just one clock and > will then assume that both the bus to the timer and the timer > itself is clocked from the same clock. But I highly doubt that this > is the case. I believe 1 clock was allowed for early bindings, but yes it should be 3. Rob