Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752670AbcDDJLj (ORCPT ); Mon, 4 Apr 2016 05:11:39 -0400 Received: from smtprelay4.synopsys.com ([198.182.47.9]:57847 "EHLO smtprelay.synopsys.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750788AbcDDJLh (ORCPT ); Mon, 4 Apr 2016 05:11:37 -0400 Subject: Re: [PATCH 1/3 v2] drm/i2c/adv7511: Add audio support To: Laurent Pinchart , References: <15b1936d307912ba12df7fa09ec3a7a80ac5fcef.1459174494.git.joabreu@synopsys.com> <5276355.2bQYPXCpz6@avalon> CC: Jose Abreu , , , , , , , , , , , , , , , , , , , , , , , , From: Jose Abreu Message-ID: <57022E63.2010900@synopsys.com> Date: Mon, 4 Apr 2016 10:05:39 +0100 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101 Thunderbird/38.6.0 MIME-Version: 1.0 In-Reply-To: <5276355.2bQYPXCpz6@avalon> Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: 7bit X-Originating-IP: [10.107.19.56] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5298 Lines: 167 Hi Laurent, On 01-04-2016 18:10, Laurent Pinchart wrote: > Hi Jose, > > Thank you for the patch. > > On Monday 28 Mar 2016 15:36:09 Jose Abreu wrote: >> This patch adds audio support for the ADV7511 HDMI transmitter >> using ALSA SoC. >> >> The code was ported from Analog Devices linux tree from >> commit 1770c4a1e32b ("Merge remote-tracking branch >> 'xilinx/master' into xcomm_zynq"), which is available at: >> - https://github.com/analogdevicesinc/linux/ >> >> The main core file was renamed from adv7511.c to adv7511_core.c >> so that audio and video compile into a single adv7511.ko module >> and to keep up with Analog Devices kernel tree. >> >> The audio can be disabled using menu-config so it is possible >> to use only video mode. >> >> The HDMI mode is automatically started at boot and the audio >> (when enabled) registers as a codec into ALSA. >> >> SPDIF DAI format was also added to ASoC as it is required >> by adv7511 audio. >> >> Signed-off-by: Jose Abreu >> --- >> >> No changes v1 -> v2. >> >> drivers/gpu/drm/i2c/Kconfig | 11 + >> drivers/gpu/drm/i2c/Makefile | 2 + >> drivers/gpu/drm/i2c/adv7511.c | 1024 ------------------------------- >> drivers/gpu/drm/i2c/adv7511.h | 41 ++ >> drivers/gpu/drm/i2c/adv7511_audio.c | 310 +++++++++++ >> drivers/gpu/drm/i2c/adv7511_core.c | 1005 ++++++++++++++++++++++++++++++ > Please use git-format-patch -M to detect renames if you send a new version of > this series, it will help with review. Ok, will do that in next version. >> include/sound/soc-dai.h | 1 + >> 7 files changed, 1370 insertions(+), 1024 deletions(-) >> delete mode 100644 drivers/gpu/drm/i2c/adv7511.c >> create mode 100644 drivers/gpu/drm/i2c/adv7511_audio.c >> create mode 100644 drivers/gpu/drm/i2c/adv7511_core.c > [snip] > >> diff --git a/drivers/gpu/drm/i2c/adv7511_core.c >> b/drivers/gpu/drm/i2c/adv7511_core.c new file mode 100644 >> index 0000000..d54256a >> --- /dev/null >> +++ b/drivers/gpu/drm/i2c/adv7511_core.c > [snip] > >> +static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id >> *id) +{ >> + struct adv7511_link_config link_config; >> + struct adv7511 *adv7511; >> + struct device *dev = &i2c->dev; >> + unsigned int val; >> + int ret; >> + >> + if (!dev->of_node) >> + return -EINVAL; >> + >> + adv7511 = devm_kzalloc(dev, sizeof(*adv7511), GFP_KERNEL); >> + if (!adv7511) >> + return -ENOMEM; >> + >> + adv7511->powered = false; >> + adv7511->status = connector_status_disconnected; >> + >> + ret = adv7511_parse_dt(dev->of_node, &link_config); >> + if (ret) >> + return ret; >> + >> + /* >> + * The power down GPIO is optional. If present, toggle it from active to >> + * inactive to wake up the encoder. >> + */ >> + adv7511->gpio_pd = devm_gpiod_get_optional(dev, "pd", GPIOD_OUT_HIGH); >> + if (IS_ERR(adv7511->gpio_pd)) >> + return PTR_ERR(adv7511->gpio_pd); >> + >> + if (adv7511->gpio_pd) { >> + mdelay(5); >> + gpiod_set_value_cansleep(adv7511->gpio_pd, 0); >> + } >> + >> + adv7511->regmap = devm_regmap_init_i2c(i2c, &adv7511_regmap_config); >> + if (IS_ERR(adv7511->regmap)) >> + return PTR_ERR(adv7511->regmap); >> + >> + ret = regmap_read(adv7511->regmap, ADV7511_REG_CHIP_REVISION, &val); >> + if (ret) >> + return ret; >> + dev_dbg(dev, "Rev. %d\n", val); >> + >> + ret = regmap_register_patch(adv7511->regmap, adv7511_fixed_registers, >> + ARRAY_SIZE(adv7511_fixed_registers)); >> + if (ret) >> + return ret; >> + >> + regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, edid_i2c_addr); >> + regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR, >> + packet_i2c_addr); >> + regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR, cec_i2c_addr); >> + adv7511_packet_disable(adv7511, 0xffff); >> + >> + adv7511->i2c_main = i2c; >> + adv7511->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1); >> + if (!adv7511->i2c_edid) >> + return -ENOMEM; >> + >> + if (i2c->irq) { >> + init_waitqueue_head(&adv7511->wq); >> + >> + ret = devm_request_threaded_irq(dev, i2c->irq, NULL, >> + adv7511_irq_handler, >> + IRQF_ONESHOT, dev_name(dev), >> + adv7511); >> + if (ret) >> + goto err_i2c_unregister_device; >> + } >> + >> + /* CEC is unused for now */ >> + regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL, >> + ADV7511_CEC_CTRL_POWER_DOWN); >> + >> + adv7511_power_off(adv7511); >> + >> + i2c_set_clientdata(i2c, adv7511); >> + >> +#ifdef CONFIG_DRM_I2C_ADV7511_AUDIO >> + adv7511_audio_init(&i2c->dev); >> +#endif > Shouldn't we condition this to the audio channel being somehow described in DT > ? If a board doesn't route audio signals to the ADV7511 audio input, there's > no need to register an audio codec. I can do this but the audio is already conditionally compiled using menuconfig. Is it really necessary to add this extra layer of condition? >> + >> + adv7511_set_link_config(adv7511, &link_config); >> + >> + /* Enable HDMI mode */ >> + regmap_update_bits(adv7511->regmap, ADV7511_REG_HDCP_HDMI_CFG, >> + ADV7511_HDMI_CFG_MODE_MASK, >> + ADV7511_HDMI_CFG_MODE_HDMI); >> + >> + return 0; >> + >> +err_i2c_unregister_device: >> + i2c_unregister_device(adv7511->i2c_edid); >> + >> + return ret; >> +} Best regards, Jose Miguel Abreu