Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757467AbcDEF3u (ORCPT ); Tue, 5 Apr 2016 01:29:50 -0400 Received: from mail.kmu-office.ch ([178.209.48.109]:49163 "EHLO mail.kmu-office.ch" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757201AbcDEF2J (ORCPT ); Tue, 5 Apr 2016 01:28:09 -0400 From: Stefan Agner To: dri-devel@lists.freedesktop.org, shawnguo@kernel.org, stefan@agner.ch Cc: kernel@pengutronix.de, airlied@linux.ie, daniel.vetter@ffwll.ch, jianwei.wang.chn@gmail.com, alison.wang@freescale.com, meng.yi@nxp.com, alexander.stein@systec-electronic.com, mturquette@baylibre.com, sboyd@codeaurora.org, mark.rutland@arm.com, robh+dt@kernel.org, pawel.moll@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 4/9] drm/fsl-dcu: add extra clock for pixel clock Date: Mon, 4 Apr 2016 22:28:36 -0700 Message-Id: <1459834121-25997-5-git-send-email-stefan@agner.ch> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1459834121-25997-1-git-send-email-stefan@agner.ch> References: <1459834121-25997-1-git-send-email-stefan@agner.ch> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4035 Lines: 113 The Vybrid DCU variant has two independent clock inputs, one for the registers (IPG bus clock) and one for the pixel clock. Support this distinction in the DCU DRM driver while staying backward compatible for old device trees. Signed-off-by: Stefan Agner --- Documentation/devicetree/bindings/display/fsl,dcu.txt | 11 +++++++---- drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c | 2 +- drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 16 +++++++++++++++- drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h | 1 + 4 files changed, 24 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/display/fsl,dcu.txt b/Documentation/devicetree/bindings/display/fsl,dcu.txt index ebf1be9..2703cf2 100644 --- a/Documentation/devicetree/bindings/display/fsl,dcu.txt +++ b/Documentation/devicetree/bindings/display/fsl,dcu.txt @@ -6,8 +6,11 @@ Required properties: * "fsl,vf610-dcu". - reg: Address and length of the register set for dcu. -- clocks: From common clock binding: handle to dcu clock. -- clock-names: From common clock binding: Shall be "dcu". +- clocks: Handle to "dcu" and "pix" clock (in the order below) + This can be the same clock (e.g. LS1021a) + See ../clocks/clock-bindings.txt for details. +- clock-names: Should be "dcu" and "pix" + See ../clocks/clock-bindings.txt for details. - big-endian Boolean property, LS1021A DCU registers are big-endian. - fsl,panel: The phandle to panel node. @@ -15,8 +18,8 @@ Examples: dcu: dcu@2ce0000 { compatible = "fsl,ls1021a-dcu"; reg = <0x0 0x2ce0000 0x0 0x10000>; - clocks = <&platform_clk 0>; - clock-names = "dcu"; + clocks = <&platform_clk 0>, <&platform_clk 0>; + clock-names = "dcu", "pix"; big-endian; fsl,panel = <&panel>; }; diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c index 35876e3..68f72fb 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c @@ -79,7 +79,7 @@ static void fsl_dcu_drm_crtc_mode_set_nofb(struct drm_crtc *crtc) unsigned long dcuclk; index = drm_crtc_index(crtc); - dcuclk = clk_get_rate(fsl_dev->clk); + dcuclk = clk_get_rate(fsl_dev->pix_clk); div = dcuclk / mode->clock / 1000; /* Configure timings: */ diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c index f2a9c1b..f80c116 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c @@ -331,10 +331,21 @@ static int fsl_dcu_drm_probe(struct platform_device *pdev) return ret; } + fsl_dev->pix_clk = devm_clk_get(dev, "pix"); + if (IS_ERR(fsl_dev->pix_clk)) { + /* legancy binding, use dcu clock as pixel clock */ + fsl_dev->pix_clk = fsl_dev->clk; + } + ret = clk_prepare_enable(fsl_dev->pix_clk); + if (ret < 0) { + dev_err(dev, "failed to enable pix clk\n"); + goto disable_clk; + } + drm = drm_dev_alloc(driver, dev); if (!drm) { ret = -ENOMEM; - goto disable_clk; + goto disable_pix_clk; } fsl_dev->dev = dev; @@ -355,6 +366,8 @@ static int fsl_dcu_drm_probe(struct platform_device *pdev) unref: drm_dev_unref(drm); +disable_pix_clk: + clk_disable_unprepare(fsl_dev->pix_clk); disable_clk: clk_disable_unprepare(fsl_dev->clk); return ret; @@ -365,6 +378,7 @@ static int fsl_dcu_drm_remove(struct platform_device *pdev) struct fsl_dcu_drm_device *fsl_dev = platform_get_drvdata(pdev); clk_disable_unprepare(fsl_dev->clk); + clk_disable_unprepare(fsl_dev->pix_clk); drm_put_dev(fsl_dev->drm); return 0; diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h index af3a707..f60ec0a 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h @@ -183,6 +183,7 @@ struct fsl_dcu_drm_device { struct regmap *regmap; int irq; struct clk *clk; + struct clk *pix_clk; /*protects hardware register*/ spinlock_t irq_lock; struct drm_device *drm; -- 2.7.4