Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757524AbcDEIMh (ORCPT ); Tue, 5 Apr 2016 04:12:37 -0400 Received: from hqemgate16.nvidia.com ([216.228.121.65]:7055 "EHLO hqemgate16.nvidia.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751985AbcDEIMe convert rfc822-to-8bit (ORCPT ); Tue, 5 Apr 2016 04:12:34 -0400 X-PGP-Universal: processed; by hqnvupgp07.nvidia.com on Tue, 05 Apr 2016 01:10:38 -0700 Message-ID: <570370E5.3070901@nvidia.com> Date: Tue, 5 Apr 2016 13:31:41 +0530 From: Laxman Dewangan User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.4.0 MIME-Version: 1.0 To: Mark Brown CC: Bjorn Andersson , Bjorn Andersson , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Liam Girdwood , "Stephen Warren" , "devicetree@vger.kernel.org" , "linux-kernel@vger.kernel.org" , Gandhar Dighe , "Stuart Yates" Subject: Re: [PATCH 1/2] regulator: DT: Add support to scale ramp delay based on platform behavior References: <20160331183130.GR2350@sirena.org.uk> <56FD6CF7.5080909@nvidia.com> <20160331184553.GS2350@sirena.org.uk> <56FD6ED6.3020507@nvidia.com> <20160331185945.GT2350@sirena.org.uk> <56FD7379.2000307@nvidia.com> <20160331192227.GU2350@sirena.org.uk> <56FD7F07.7010404@nvidia.com> <20160331203942.GV2350@sirena.org.uk> <56FE2009.4020302@nvidia.com> <20160401161121.GZ2350@sirena.org.uk> In-Reply-To: <20160401161121.GZ2350@sirena.org.uk> X-Originating-IP: [10.19.65.30] X-ClientProxiedBy: DRUKMAIL102.nvidia.com (10.25.59.20) To bgmail102.nvidia.com (10.25.59.11) Content-Type: text/plain; charset="UTF-8"; format=flowed Content-Transfer-Encoding: 8BIT Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2194 Lines: 43 On Friday 01 April 2016 09:41 PM, Mark Brown wrote: > * PGP Signed by an unknown key > > On Fri, Apr 01, 2016 at 12:45:21PM +0530, Laxman Dewangan wrote: >> On Friday 01 April 2016 02:09 AM, Mark Brown wrote: >>> Is the error in the observed values a function of the capacitance that >>> we can calcuate here? >> As per datasheet, There is no direct equation for ramp time deviation when >> regulator output current cross the regulator current limit. > OK, so it's really a current limit that's kicking in rather than a ramp > rate control (though if it's a current limit I'm still not clear why the > target rate limits where we cap)? Can we do something based on the > maximum load configured and the current limit? That sounds more generic > anyway, a current limiting feature is quite common. If we implement the > current limit interface for the regulator and then specify what the > maximum load is we should be able to do the calculations you quoted from > the datasheet I'd have thought (unless I'm missing something). We are not having any control/configuration for this in this particular observations. All are set at maximum and still seeing this deviation. During a DVS transition, the regulators output current will increase by COUT*dV/dt. In the event that the load current plus the additional current imposed by the DVS transition, reach the regulator’s current limit, the current limit will be enforced. When the current limit is enforced, the advertised DVS transition rate (dV/dt) will not occur. Now there is not really equation that how it control dV/dt with required current vs regulator’s current limit current limit. Working with HW team on LDO3 rail, we observed that Vendor recommend the Cout to 2.2uF. With having this capacitor in rail, we meet the advertised dv/dt i.e. 100mV/us. In Our platform, we have used 2x4.7uF for signal conditioning and we observed dv/dt went by half. When we changed the output capacitor to 2.2uF, we get exactly what vendor advertised. So can we derive the configured value from the ramp time (platform) and some multiplication factor? If this is not common way then probably maxim specific as suggested by Bjorn.